Clover r4747 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
Tested with unlocked Workstation 15 running OSX 10.9 -->10.14 guest in Windows X64 host.
1. Download and unzip "EFI_Clover_r4747 for VMware.zip". Mount Clover-v2.4k-4747-X64 by double clicking on it.
2. Mount your VM's EFI System Partition eg in terminal
sudo diskutil mount disk0s1
3. Copy EFI folder from step 1 into the EFI partition
4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
The name means: TINU Is Not #####, the U refers to a popular software that is used to create macOS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
This app basically is a graphical interface for the createinstallmedia executable that is inside the macOS and Mac OS X installer apps, it is capable to create a bootable installer completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides to you simplicity and flexybility, and lets you to avoid most of the steps needed with every other app.
TINU allows you to create easily a bootable macOS installer without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install clover on the usb drive once TINU has finished or leave it as is if you want to use it on a real Mac.
- Simple to use UI that allows you to easily start the bootable macOS installer creation process
- It can work with every macOS installer app that has the createinstallmedia executable inside of its resources folder (including also beta and newly released installers)
- You can use any volume you want that can be erased and is at least 7 GB of size (if the volume's drive is not in GUID format, TINU will format it to make it GUID!)
- Works on Mac OS recovery, so you can create a bootable macOS installer from the macOS installer itself or from the macOS recovery, and you can use TINU to install macOS too.
- All vanilla, the bootable macOS installers created with this tool are 100% vanilla, just like you created them using the command line "createinstallmedia" method in the terminal
- Open source, you will know what this program does on your computer and also you can create your own version by downloading and playing with the source code
- Does not require to do anything of special first, just open the program, and make sure you have a USB drive pulugged in and that you have a macOS installer app in the system.
- No need to go in disk utility first, TINU can format your drive/partition for you
- Uses recent and more modern APIs and SDKs and Swift 3 language
- Transparent graphics style available (use alt + s on the keyboard or View->Use transparent style)
- Works using the latest versions of macOS and will also support newer Mac installers out of the box without needing for an update
- Advanced section, to customize your bootable macOS installer
Features that are planned for some future versions:
- Integrated EFI partition mounter tool (TINU can already mount EFI partitions from version 2.0, but a dedicated section which allows to mount every EFI partition in the system will be added)
- Install clover and configure clover
- Install kexts inside the kexts folder of clover
- Clover drivers customization
- Use custom dsdt in clover
- integrated pre-made clover config templates database from a remote and open repository
- Support for other languages, at least Italian
- A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer)
- A drive or a free partition (on a drive which already supports GUID) of at least 7 GB that you want to turn into a macOS/Mac OS X installer
- A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive in your machine (excepted the drive or volume you want to turn into your macOS install media)
- You can download the pre-made and code signed binary from the releases section of the github repo: https://github.com/ITzTravelInTime/TINU/releases
- Or you can just build your own copy by just downloading the source code and then using Xcode (requires Xcode 8): https://github.com/ITzTravelInTime/TINU
- This software is under GNU GPL v3 license so any new branch/mod/third party release must be open source and under the same license
- I (project creator) assume no responsibility for any use of this app and this source code, and also for any kind of hardware and software damage to any computer and any device or peripheral that may come from this app or source code during it's use and outside it's usage
- I (project creator) do not guarantee support to you, this is only an open source project, not a product released by a company!
- This project is born only for educational and demonstrative purposes, it's not intended to be used for commercial purposes and it will never be, don't use source code from this project to create apps or software for that aim.
- This is a no-profit project, born only to let people to create macOS install medias in a more simple way and also to learn how to create this kind of apps.
- Apple for macos and installer apps and scripts
- People that helped me a lot:
Francesco Perchiazzi, Nicola Tomarelli, Roberto Sciortino, Raffaele Sonnessa, Ermanno Nicoletti, Tommaso Dimatore, Michele Vitiello Bonaventura, Massimiliano Faralli, Davide Dessì, Giorgio Dall'Aglio, Thomas Tempelmann, Peter Paul Chato.
- Special thanks to Italian Hackintosh group!! for help (https://www.facebook.com/groups/Italia.hackintosh/?fref=ts)
- Pietro Caruso (ITzTravelInTime) for creating, maintaing and developing this project
Please help with DSDT patch for Gigabyte GA-Z170X-Gaming 7 with i7 6700k. This is my first hackintosh build and have done a lot of research/reading the last several days. I went with what is supposed to be a vanilla install of High Sierra. This was after trying to install Mojave and then realizing my video card doesn't have Nvidia web drivers for it. Probably installed High Sierra 6 or so times trying to get it right. Still don't have HDMI audio working, but have a DP2HDMI adapter coming in the mail. As I understand, that is supposed to fix it. My motherboard audio doesn't work right either. The digital output works as well as the line out, but the headphone port does not. I don't know about the other sound ports My usb 3.1 port doesn't work when waking from sleep. I am sure there are other issues that I haven't found/don't know about yet. Attached is my runme app files. Any help with this would be greatly appreciated!!!
OS X version: High Sierra 10.13.6
Motherboard model: Gigabyte GA-Z170X-Gaming 7 (revision 1.0)
Bios version: F22m (most current)
Processor: 4.01 GHz Intel Core i7 6700k
Graphics: ASUS NVIDIA GeForce GTX 1070 8191 MB
Send me StealthDragon.zip
Update: Now running Mojave! Thanks to mojave2core! Yeah Still using C2D in 2019!
Inserted a nice and cheap GT710 that is not relying on nVidias Webdrivers and runs OOB under Mojave.
Nice, seeing High Sierra running on this old but capable system! It rocks with a new ASUS GT1030
6 GB DDR2 RAM
Asus GT1030 2GB
Sandisk SSD 128GB
TP-Link AC1200 Wifi USB
Inateck KT4006 USB 3.0 PCIe (No boot)
Clover: 4297 4360
A good deal of DSDT editing was necessary to get this machine to boot High Sierra but finally it works flawlessly, even sleep and wake!
You NEED to have the DSDT put in place for installation because otherwise macOS doesn't recognize the SATA ports.
There are a few important BIOS settings: SATA hast to be set to AHCI and "native" and HPET has to be run "64-bit", I'd recommend to disable IDE and the serial and parallel port.
For the GT1030 nVidia Webdrivers are needed, have to boot with nv_disable=1 until you have them installed.
You have to install Clover in legacy mode because this old fella does not support UEFI.
Only downside: The so often recommended Inateck USB-card isn't recognized by BIOS, so you cannot boot from it. It works perfectly within macOS though, have the ac-Wifi connected to it.