hiroo Posted November 2, 2006 Share Posted November 2, 2006 5 - No About This MacCoronel patch -> From 10.4.7 what is this coronel patch? any source for it without the whole 10.4.7 dvd? Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223211 Share on other sites More sharing options...
Bruce Wang Posted November 2, 2006 Share Posted November 2, 2006 I think it's Colonel patch, please refer to the below thread: http://forum.insanelymac.com/index.php?showtopic=30583 Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223218 Share on other sites More sharing options...
vassalle Posted November 2, 2006 Share Posted November 2, 2006 If you are using any version of apple's disk utility: use PC Partition Scheme: In Disk Utility: click on the disk, click on the options button in the window to the right, select PC Partition Scheme, newer versions of the Intel Disk Utility default to Apple Partition scheme, you're BIOS will not see or be able to bless it or set it to active. You can also do this with the "disk util" and "fdisk" commands. GT I'm having the problem as Tommy, exactly the same problem. However, i dont have a 10.4.3 installer hence the 10.4.3 disk utility. How do I use disk util or fdisk to rectify my problems? I'm really a n00b. actually tried that but getting permission denied - managed to do this by leaving the dvd in my drive at booting into the working 10.4.6 (which was working purrfectly before i attempted to install 10.4.8 jas) Say that i manage to bless my windows partition, would i be able to load osx, assuming that i have configured my boot.ini with the required chain0 file? or does it only make it possible to go into winblows but still have that blinking cursor problem if i chose to boot into my 10.4.8 mac in the ntloader? hope i explained it clearly. Waiting for a guru to sort out my misery Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223247 Share on other sites More sharing options...
___ Posted November 2, 2006 Share Posted November 2, 2006 I smell something fishy ^o), (haven't tried to burn yet) I don't think its corrupted though... Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223587 Share on other sites More sharing options...
AndyMS Posted November 2, 2006 Share Posted November 2, 2006 C2D E6600 @ 3.2GHz Intel 975XBX v304 Saphire X1900XT Flashed to XTX Onboard sound working with replaced kext 10.4.8 installed and running like a champ using mifki's kernel. Xbench jumpped from about 165 to 243. Had to partition with the 10.4.7 DVD then install 10.4.8, other than that no problems whatsoever. OSX frickin flies now. Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223623 Share on other sites More sharing options...
xtreme571 Posted November 2, 2006 Share Posted November 2, 2006 Upgrade from 10.4.7 > 10.4.8 "About This Mac" Showing 0 x 2 Processor "System Info" Not avail. Everything else is working ok so far. Acer ASPIRE 1710 P4 3.4Ghz 1024MB DDR 120GB HD Wi-Fi Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223713 Share on other sites More sharing options...
Infamous Posted November 2, 2006 Share Posted November 2, 2006 C2D E6600 @ 3.2GHzIntel 975XBX v304 Saphire X1900XT Flashed to XTX Onboard sound working with replaced kext 10.4.8 installed and running like a champ using mifki's kernel. Xbench jumpped from about 165 to 243. Had to partition with the 10.4.7 DVD then install 10.4.8, other than that no problems whatsoever. OSX frickin flies now. Looks like you didn't use fsb= kernel flag... Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223745 Share on other sites More sharing options...
AndyMS Posted November 3, 2006 Share Posted November 3, 2006 Looks like you didn't use fsb= kernel flag... Yes I did, fsb=360. Without it xbench is 140. Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223843 Share on other sites More sharing options...
OriginalMACNUT Posted November 3, 2006 Share Posted November 3, 2006 I smell something fishy ^o), (haven't tried to burn yet) I don't think its corrupted though... I honestly don't think it is, I gotten it to upgrade from the first ( corrupted ) dvd release by jas, But I was able to boot from the dvd, anuff said. I think it's a Intel problem. brb, smallville is on tv. LOL Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223847 Share on other sites More sharing options...
joe75 Posted November 3, 2006 Share Posted November 3, 2006 Dose any one have 2 cpus enabled with new 8.8.1 mifki Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223892 Share on other sites More sharing options...
Guest bikedude880 Posted November 3, 2006 Share Posted November 3, 2006 A picture is worth a thousand words: 2core.tiff Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-223896 Share on other sites More sharing options...
joe75 Posted November 3, 2006 Share Posted November 3, 2006 A picture is worth a thousand words Are you just showing off or are both cores running Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224015 Share on other sites More sharing options...
Guest bikedude880 Posted November 3, 2006 Share Posted November 3, 2006 Both cores are actually running as you can see in the Activity Monitor. The rest was just to show it was 10.4.8. Now my signature would be showing off Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224022 Share on other sites More sharing options...
sprange Posted November 3, 2006 Share Posted November 3, 2006 For anyone who is still using the much maligned 'first release' of JaS' 10.4.8 DVD and is experiencing no network connectively...try replacing the IONetworkingFamily.kext from the official 10.4.8 combo update. Things are looking good over here now (well, I can't get 'About this Mac' to work, but that was the last of my worries). Omni's Titan.kext is fantastic...my BFG 7900GT OC is fully functional with DVI output using either of the two outputs. JaS must have put some serious time into this...I could not get any upgrade attempt from a previous version to work (you name it, I tried it--including compiling my own kernels), yet his DVD installed like a champ (well, the first attempt did wipe out a partition, but who's keeping track). Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224024 Share on other sites More sharing options...
consolation Posted November 3, 2006 Share Posted November 3, 2006 Has anyone with original iso have problems with PCI cards being recognised. I get nothing in sys profiler and my FW card went awol... Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224029 Share on other sites More sharing options...
joe75 Posted November 3, 2006 Share Posted November 3, 2006 Both cores are actually running If I use both cores, I start crashing about 1 minute after boot and even reboot Got any Ideas @consolation, did you try the "Hardware" fix or did you need it Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224034 Share on other sites More sharing options...
katmail Posted November 3, 2006 Share Posted November 3, 2006 Hi bikedude880 One things about your Desktop The Dock is very Tiny Regards Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224054 Share on other sites More sharing options...
Guest bikedude880 Posted November 3, 2006 Share Posted November 3, 2006 Hi bikedude880One things about your Desktop The Dock is very Tiny Regards I have the display at 1280x1024, the native resolution of my monitor. I scaled the dock down and turned off those bloody dock effects. I can't stand those dock effects Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224065 Share on other sites More sharing options...
ROXR Posted November 3, 2006 Share Posted November 3, 2006 I tried 10.4.8 with this hardware Asrock 945GDVI Conroe Allendale 6400 mem Geil GMA950 REaltek RTL8169S PCI card and another old PCI RTL8139 the most big problem is than the system don't load 915.kext and don't detect any PCI card. Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224089 Share on other sites More sharing options...
consolation Posted November 3, 2006 Share Posted November 3, 2006 @consolation, did you try the "Hardware" fix or did you need it If you mean the system profiler fix, then, yes I'm using the one out of 10.4.7 It just won't detect any PCI cards, PCIE is fine.... It's not just reporting, I actually can't use them. Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224166 Share on other sites More sharing options...
consolation Posted November 3, 2006 Share Posted November 3, 2006 When I look at the AppleFWOHCI extension, that I presume should deal with my FW card, I get -> Version: 2.8.3 Last Modified: 4/01/06 3:39 PM Get Info String: AppleFWOHCI version 2.8.3, Copyright 2006 Apple Computer, Inc. Location: /System/Library/Extensions/IOFireWireFamily.kext/Contents/PlugIns/AppleFWOHCI.kext kext Version: 2.8.3 Load Address: 0x1fa8e000 Valid: Yes Authentic: Yes Dependencies: Incomplete Dependency Errors: com.apple.iokit.IOFireWireFamily: No valid version of this dependency can be found com.apple.iokit.IOPCIFamily: No valid version of this dependency can be found com.apple.kpi.iokit: No valid version of this dependency can be found com.apple.kpi.libkern: No valid version of this dependency can be found com.apple.kpi.mach: No valid version of this dependency can be found com.apple.kpi.unsupported: No valid version of this dependency can be found Integrity: Kext is modified Ouch, that can't be good, can it!!!? IOPCIFamily doesn't look good either... Version: 2.1 Last Modified: 1/11/06 9:39 AM Get Info String: 2.1, Copyright Apple Computer, Inc. 2000-2004 Location: /System/Library/Extensions/IOPCIFamily.kext kext Version: 2.1 Load Address: 0x1b405000 Valid: Yes Authentic: Yes Dependencies: Incomplete Dependency Errors: com.apple.kernel.iokit: No valid version of this dependency can be found com.apple.kernel.libkern: No valid version of this dependency can be found Integrity: Kext is modified It would be very awkward for me to re-install, BUT this just doesn't seem like good omens... Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224189 Share on other sites More sharing options...
joe75 Posted November 3, 2006 Share Posted November 3, 2006 Ouch, that can't be good, can it!!!? It would be very awkward for me to re-install, BUT this just doesn't seem like good omens... Did you already try replacing those with ones 4.7 Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224219 Share on other sites More sharing options...
consolation Posted November 3, 2006 Share Posted November 3, 2006 Did you already try replacing those with ones 4.7 Well... I "thought" about it, it's just that there is SO many -I think I would just end up with 10.4.7 lol, and would they even work with the new kernel? Maybe I should just wait till I get a new data cap and try the re-release. Hopefully I can install that over the top, cause my HDs are full to bursting so there is nowhere for me to move my data for a clean install. I would be very gratefull if anyone knows a non-lethal way of patching this mess... BTW these weren't the only "No valid version of this dependency can be found" errors. Virtually every extension has some. Amazingly, except for not detecting PCI cards, the whole system is running very smoothly. Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224233 Share on other sites More sharing options...
joe75 Posted November 3, 2006 Share Posted November 3, 2006 BTW these weren't the only "No valid version of this dependency can be found" errors. Virtually every extension has some. Amazingly, except for not detecting PCI cards, the whole system is running very smoothly. I didn't use DVD release and I don't have any of those problems. Maybe just redo with re-release Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224249 Share on other sites More sharing options...
JaS Posted November 3, 2006 Share Posted November 3, 2006 I didn't use DVD release and I don't have any of those problems. Maybe just redo with re-release All I see is you trolling about my release,do it better then me or knock it off. Link to comment https://www.insanelymac.com/forum/topic/31707-1048-jas-install-reports-only/page/3/#findComment-224280 Share on other sites More sharing options...
Recommended Posts