Stuck on the apple logo and progress bar during installation

[sstyle]

Hi guys. Tried to install an EL Capitan to PC. Make a USB, etc. But stuck on apple logo and 100% progress bar. (On photo it is not 100%, but it will so)

Photo of the screen: http://imgur.com/a/Tbj8r

MB Asus P8H61-M LX3 2.0 with integrated video + Core i5-3330.

I have to install a additional video card or anything else wrong? Thx.

Tried:
-v
nv_enabler=1
PCIRootUID=0
6.1.1 version and 6.0.1 version of #####. All the same.

 

if I should change a video card, please recommend a cheap and stable.

[Allan]

The problem is the Tonymac tools, we don't give support for ***beast tools.

 

VERY IMPORTANT: PLEASE READ! (ABOUT TONYMACX86 AND iATKOS M / Y)

 

Why InsanelyMac does not support tonymacx86

 

I know that you using Clover, but with all the modifications that you made with ***beast, it's a mix of problems...

[sstyle]

Oh..I see. So I will read how to do it correctly

[Allan]

NP bro! 

 

Use our methods: Making a 10.10/10.11 USB Installer /w Clover (UEFI and Legacy) the correct way!

[sstyle]

Thank you so much!

 

I also tried to use a Skylake. But it takes all memory on my 8gb flash card. So I will try another one with 16gb capacity and carefully read your link

[namvan]

this tool by our chris1111 worked good for me.

http://www.insanelymac.com/forum/topic/307003-clover-os-x-el-capitan-usb/

 

Please read through the guide in the link before you try to create your USB. Also use 16GB, not 8.

 

You can also try PandoraBox here if you have ever decided to use < 10.11. It is the faster usb creator I have ever used.

http://www.insanelymac.com/forum/topic/302220-pandoras-box-20-candidate-3-roll-out/

 

Good luck.

[sstyle]

I will try thanks! This tool I already downloaded today, but my flash card was not enough.

 

But what about my MB and internal video card. Is it enough?

[Allan]

But what about my MB and internal video card. Is it enough?

 

Very good hardware! 

 

But for enable HD 2500 iGPU it's necessary you use this guide: http://www.insanelymac.com/forum/topic/287668-guide-intel-hd2500-full-resolution-and-qeci-1083/

 

Maybe in El Capitan you can get CI, but not QE.

[sstyle]

ok, but "Edit: This seems to work with DVI and HDMI only. No VGA. "

 

So, I wish to buy a Nvidia card. I read that 740 is good, but it is an expensive. MB GT710 or GT730?

 

Now I tried on another PC with internal video card. And also stuck at logo and progress bar. (after "bluetooth" error). I followed this guide - http://www.insanelymac.com/forum/topic/305255-making-a-10101011-usb-installer-w-clover-uefi-and-legacy-the-correct-way/but I can not modifi config, because it is read-only. And "debug" mode does not enabled after applied terminal command (

[Allan]

GT 730 is OOB, and better than GT 710.

[sstyle]

Ok, thanks. I will buy a 730. Now I m trying on another PC with GTX275. And non-uefi MB. I see a grey installation window with language selection but after some time I get a kernel panic "appleintelcpupowermanagement" but in Clover config I has a key AsusAICPUPM = true. Also I tried to replace appleintelcpupowermanagement kext to NullCPUPowerManagement. But still get a panic (

[sstyle]

Some minutes ago I successfully installed El capitan to PC with GTX275. But no network and no sound. What should I do next? Thanks

[Allan]

But no network and no sound. What should I do next? Thanks

 

I don't know what is your Ethernet/WiFi controller, so....you need discover and tell us.

 

The same thing is for Sound, but for Sound you can use VoodooHDA.

[sstyle]

Network: nVidia nForce (VEN 10DE, DEV 0373)
Sound: SoundMax Integrated Digital HD Audio (VEN 11D4 ,DEV 198B)

[Allan]

I haven't find any kext for your Ethernet device, maybe is incompatible...

 

For sound, try VoodooHDA as i've said before.