Jump to content
10 posts in this topic

Recommended Posts

Hi, After i install El capitan successfully, i realised that i cannot connect to the internet(I'm using a D-Link DWA-123 wifi adapter), and i cannot output Audio although my speaker is connected. How do i install audio and internet drivers/kexts for my Hackintosh?

Specs

Gigabyte z87-D3H motherboard

Intel integrated graphics
i5-4460 CPU
8gb RAM

Hi, After i install El capitan successfully, i realised that i cannot connect to the internet(I'm using a D-Link DWA-123 wifi adapter), and i cannot output Audio although my speaker is connected. How do i install audio and internet drivers/kexts for my Hackintosh?

Your hardware is?start from here first... :thumbsup_anim:

  • Like 1

o install kexts inEl Capitan you have to use Kext installer for El capitan, which overrides SIP (system integration protection ...not sure)

 

i am using gaz77x mobo , may be you try attached kexts and see if it works. :)

o install kexts inEl Capitan you have to use Kext installer for El capitan, which overrides SIP (system integration protection ...not sure)

 

i am using gaz77x mobo , may be you try attached kexts and see if it works. :)

any recommended kext installer and audio kext? all the kext installer i found are outdated

any recommended kext installer and audio kext? all the kext installer i found are outdated

EDIT:I used the easykext installer, and this audio kext: https://www.dropbox.com/s/lxd76bw8i5gk3al/AppleHDA-272.36-ALC892.zip?dl=0 

But still no success.  

i have never used onboard intel graphics, besides that try the texts attached here, also search for intel on board graphics patch.

FakeSMC.kext.zip

NullCPUPowerManagement.kext.zip

VoodooHDA.kext.zip

Patched_10.7_AppleRTC.kext.zip

GenericUSBXHCI.kext.zip

i have never used onboard intel graphics, besides that try the texts attached here, also search for intel on board graphics patch.

 

NullCPUPM is not recommended (does it even work on Haswell? They use XCPM, not AICPUPM). VoodooHDA isn't recommended (I'd use a patched AppleHDA, either by Mirone or toleda). GenericUSBXHCI will literally only cause kernel panics on 10.11, it simply doesn't work. AppleRTC patch isn't needed for this board (unless you are getting CMOS resets, which I'm pretty sure doesn't happen with most Z77/Z87/Z97 boards).

  • Like 2
×
×
  • Create New...