leisgean Posted March 4, 2015 Share Posted March 4, 2015 I purchased this and plugged it in: Set of Hackintosh Apple BCM94360CD BT4.0 Wifi Card & PCI-E Adapter With Antenna Wi-Fi is working fine (system report): en0: Card Type: AirPort Extreme (0x14E4, 0x111) Firmware Version: Broadcom BCM43xx 1.0 (7.15.159.13.12) MAC Address: b8:09:8a:cd:8b:e3 Locale: FCC Country Code: US Supported PHY Modes: 802.11 a/b/g/n/ac Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165 Wake On Wireless: Supported AirDrop: Supported Status: Connected Bluetooth however is not. System report say 'no information available' under bluetooth. The following shows up in the system report under USB, which makes me think it's recognizing the device as bluetooth capable, but not utilizing it for some reason. Any help would be appreciated. BRCM20702 Hub: Product ID: 0x4500 Vendor ID: 0x0a5c (Broadcom Corp.) Version: 1.00 Speed: Up to 12 Mb/sec Manufacturer: Apple Inc. Location ID: 0x14e00000 / 10 Current Available (mA): 500 Current Required (mA): 94 Broadcom Bluetooth Download Device: Product ID: 0xf007 Vendor ID: 0x05ac (Apple Inc.) Version: 0.65 Speed: Up to 12 Mb/sec Manufacturer: Broadcom Corp Location ID: 0x14e30000 / 11 Current Available (mA): 500 Current Required (mA): Unknown (Device has not been configured) Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/ Share on other sites More sharing options...
artur_pt Posted March 4, 2015 Share Posted March 4, 2015 hello i think ur problem is here Current Required (mA): Unknown (Device has not been configured) have u read the half mini guide from toleda ? maybe there u have any tip about ur problem good hack Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2117632 Share on other sites More sharing options...
Allan Posted March 4, 2015 Share Posted March 4, 2015 Please just open one topic! This topic Help with will be deleted. Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2117668 Share on other sites More sharing options...
VirusX Posted March 4, 2015 Share Posted March 4, 2015 You didn't get the original Apple card. The product ID of the Bluetooth chip is different. I have the same problem from the same seller. Start reading here: http://www.insanelymac.com/forum/topic/302410-patch-enabling-handoff-for-non-apple-bt4-devices/?p=2111656 I posted in another thread about that too but I'm on mobile and can't quickly find that other post. Check my posts on my profile... 1 Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2117826 Share on other sites More sharing options...
leisgean Posted March 4, 2015 Author Share Posted March 4, 2015 VirusX Thanks a ton for the info. I just got the bluetooth working using the kext mentioned on the thread you linked to! No Handoff as of yet, but I haven't read through or tried everything since I got the bluetooth up and working. Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2117847 Share on other sites More sharing options...
VirusX Posted March 5, 2015 Share Posted March 5, 2015 for handoff you probably have to add the handoff patch to clover (also mentioned in the linked thread) Add this to KextsToPatch in clover: Filename: IOBluetoothFamily Find: 48 85 C0 74 5C 0F B7 48 Replace: 41 BE 0F 00 00 00 EB 59 please report back if you got wifi and bluetooth up and running at the same time. This is where I have problems right now. As soon as I turn bluetooth on, my wifi connection rate drops to almost zero. Maybe this is a yosemite issue though. Bluetooth is using the same (2.4 GHz) frequency as my wifi - maybe they interfere Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2117903 Share on other sites More sharing options...
leisgean Posted April 16, 2015 Author Share Posted April 16, 2015 Sorry it took me so long to get back. Messed up my whole extensions file folder doing something stupid, so this issue got put on the burner. Anyway, hope this helps. From what I remember the only thing I did before I went MIA was install the bt firmware uploader kext from the thread you linked me to and everything bluetooth related, including airdrop, worked except for continuity/handoff. I yesterday I got my whole system up and running and installed the continuity activation tool: https://github.com/dokterdok/Continuity-Activation-Tool/ followed its instructions and everything worked. Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2128384 Share on other sites More sharing options...
The Real Deal Posted April 24, 2015 Share Posted April 24, 2015 You didn't get the original Apple card. The product ID of the Bluetooth chip is different. I have the same problem from the same seller. Start reading here: http://www.insanelymac.com/forum/topic/302410-patch-enabling-handoff-for-non-apple-bt4-devices/?p=2111656 I posted in another thread about that too but I'm on mobile and can't quickly find that other post. Check my posts on my profile... Damn, sorry about that ; so where to find genuine Apple ones? Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2130644 Share on other sites More sharing options...
VirusX Posted April 28, 2015 Share Posted April 28, 2015 I guess one way would be to contact the seller beforehand and ask if they have the card with the right product IDs. If they confirm and don't deliver, you will at least have a reason to return the card/ask for replacement... Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2131893 Share on other sites More sharing options...
#McFly Posted July 28, 2015 Share Posted July 28, 2015 Hi Guys, I need some help. I have a Broadcom BCM94360CD (AX) Apple with adapter PCI-EX my device id is 43A0 and in the system appear 0x111, have a problem? Bluetooth connects to the notebook Windows but does not send and receive files. And do not appear information of router connection, below have two images, the my with no information and other with information. Why this? need Built-in on DPCIManager? it's not! i'm so sorry for my bad english. Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2156017 Share on other sites More sharing options...
ardoreal Posted December 17, 2015 Share Posted December 17, 2015 I got a Fenvi board that was suppose to be a genuine board, but it was not. It had the device id 0a5c. Using the bluetooth kext and then adding the Clover injector worked. I had to also sign out/sign back into iCloud to get Handoff working. Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2198345 Share on other sites More sharing options...
neo_fox33 Posted February 3, 2016 Share Posted February 3, 2016 Hi, i have the same adapter: Works on yosemite but on El capitan works wifi only. Image 1. I probe many solutions and nothing happens, turn off my system and the turn it on again the next day, the firmware upgrade. Image 2. now works on both systems. Sorry for my English I hope it helpful. Link to comment https://www.insanelymac.com/forum/topic/304915-help-with-bcm94360cd-bluetooth/#findComment-2212957 Share on other sites More sharing options...
Recommended Posts