Jump to content
kylon

[REQUEST] DSDT for Asus X53SJ-SX148V

3 posts in this topic

Recommended Posts

Hi,

 

First, sorry for my bad english :)

 

My current setup is:

ArchLinux, Windows 8.1 and Mavericks 10.9.5

Chameleon svn r2578

http://www.cnet.com/products/asus-x53sj-sx148v-15-6-core-i7-2630qm-windows-7-home-premium-4-gb-ram-500-gb-hdd/specs/

 

Mavericks seems quite stable, i can update it via apple store with no kernel panic or broken stuff (execpt voodooHDA).

i installed Fermi Nvidia Freeze fix and a kext for Atheros wifi.

i have full graphics acceleration (qe/ci) with my intel HD 3000

 

But, there s always a But xD

 

my battery is not detected (even with voodoo battery)

i cannot set brightness

only 2.4Gb of RAM accessible

no cpu power managment

wrong turbo boost freqs (max freq is 2.1 while it should be 2.9 and min freq should be 800)

hpet causes kernel panic if enabled

nvidia is not recognized

Graphical glitches from time to time

 

the most important things are the RAM, the cpu frequencies and the graphical glitches.

also if possible i would like to disable intel HD and use nvidia (not sure if this is possible on a laptop)

 

i m using a custom SSDT generated with this script: https://github.com/Piker-Alpha/ssdtPRGen.sh

 

i don t understand ACPI language so i hope a kind person can make a DSDT for my pc.

 

i would like to upgrade to Yosemite( Yosemite Zone 10.10.1), but only if i can fix these problems.

 

IMPORTANT NOTE: My BIOS sucks a lot, i cannot switch gpu, UEFI/EFI is not supported and there are no options.If someone have a custom BIOS for my pc with all the options unlocked, please let me know!

 

Let me know if you need some files from my pc.

 

Thanks

Share this post


Link to post
Share on other sites
Advertisement

https://www.dropbox.com/s/owmmaw25wikr37v/DSDT.aml%202.zip?dl=0

if for any reason this causes boot fail use dsdt=null in chameleon ;)


for power mangement read:

 

http://www.insanelymac.com/forum/topic/298027-guide-aio-guides-for-hackintosh/?do=findComment&comment=2019604

 

consider testing clover on usb. but your triple boot complicates things! ;)


to go with the patches install:

https://www.dropbox.com/sh/hpdm3d4dxq9hkf6/AADTPQvPd0ttmvEMS1B900hDa?dl=0 brightness kext

 

https://www.dropbox.com/sh/91htab96lx12g6u/AAAyBruvuhArvmhuKT2SVUCia?dl=0 battery manager

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
       
      BaseSystem_PLK.tool_Catalina.zip
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By mpe
      Hi,
       
      After wakeup my system is slow, console input show some duplicate character when I type some commands. Intel Power Gadget is shows no more statistics.
      I am looking for solution several days, but I can't find.
       
      Maybe some one have the same system or tips for me?
       
      I have already attach the Runme.app zip
       
      Best regards,
       
      mpe
      Send me mpe.zip
    • By AwlsomeAlex
      My Laptop:
      ASUS ZenBook UX330UAR
      8GB RAM / 256GB SSD
      Intel i5-8250U
      1920 x 1080 (UHD 620)

      After using this guide to setup my laptop as a Hackintosh (macOS 10.14.6), every once in a while it'll result in the screen flickering, and usually the intervals between the flickering get smaller and smaller to the point where sometimes the screen just panics. I tried injecting my EDID and setting my SMBIOS to iMac18,1 but none of those defeated the dreaded flickering. 

      Any assistance would be greatly appreciated!
      24838.zip
       
      EDIT: I'd also note that this does not happen with Linux nor Windows so it is a macOS issue not a hardware issue. 
    • By Criis87
      Hello guys, how are you? I have been trying to make this work for the last 3 days but I really can't. I have a 2500K overclocked from 3.3ghz to 4.4ghz but my Hacki doesn't seem to care . I have used Piker Alpha script to make a new SSDT and move into EFI/Clover/ACPI/PATCHED but it seems its not being loaded in clover? I attached a print below. My mother is an Asus p8p67 deluxe.
       
       
       

      This is my AppleIntelinfo:

      CPU Ratio Info:

      ------------------------------------

      CPU Low Frequency Mode.............: 1600 MHz

      CPU Maximum non-Turbo Frequency....: 3300 MHz

      CPU Maximum Turbo Frequency........: 5900 MHz

      CPU P-States [ (16) 32 33 ]

      CPU C3-Cores [ 1 2 ]

      CPU C6-Cores [ 1 2 ]

      CPU P-States [ (16) 26 32 33 ]

      CPU C3-Cores [ 1 2 3 ]

      CPU C6-Cores [ 1 2 3 ]

      CPU P-States [ (16) 26 30 32 33 ]

      CPU P-States [ 16 26 30 31

      ------------------------------------

      Cpu goes from 1.6ghz to 3.3ghz max, in won't use overclock at all, it locked to 3.3ghz max. 
       
       
       
       
       
      These are my kexts in HD/Library/Extensions:
       


      In Windows 10 partition overclock is being shown by CPUZ, 4.4ghz as it is. If I am missing something can you please give me a hand? Thanks in advance!!
×