DarthRamone Posted February 11, 2015 Share Posted February 11, 2015 Hello everyone! I'm trying to install Mavericks on my HP ENVY 17-1050ep laptop and I've got some problems with it. If you're too lazy to follow link, here some specs: CPU: Intel Core i7-720QM RAM: 8GB DDR3 (if it matters) Video: ATI Mobility Radeon 5850 Graphics So, I've tried to boot and got freeze. Okay google: installation hackintosh stucks. Answer: Use -v. Okay, once again with -v: Stucks on [IOBluetoothHCIController][start] -- completed Okay google: wtf. Answer: Use GraphicsEnabler=No, -x, cpus=1 (it was before it, forgot to describe). Whatever, it doesn't change anything. Oh, no, it does. With GE=No option i've got black screen and freeze again. So, with GE=No I've no any graphics(haha) and stuck, and without it - just stuck after loading bluetooth driver(or what is it, dunno). Also google told me try to disable discrete video in BIOS, but I'm not sure if it is possible on this laptop. There is just couple options in BIOS(or UEFI) and all of them is about boot options and so on. There is no possibility to disable discrete video, and I'm not sure that I have integrated. Anyway, here is lspci output: darthramone@deathstar:~$ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Broadway PRO [Mobility Radeon HD 5850] 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) 04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) 7f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) 7f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) 7f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) 7f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) 7f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) 7f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) 7f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) 7f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) 7f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) 7f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) 7f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) What should I do? Please - help. Sorry for bad english, and thanks in advance. Peace! Quote Link to comment Share on other sites More sharing options...
artur_pt Posted February 11, 2015 Share Posted February 11, 2015 hello just delete from installer amd5000controller to install boot -f -v GraphicsEnabler=No and the other flags u need to boot after install must see if u have the right dev id from that card in amd kext and use ATIConfig=Nomascus ATI Graphics if use clover just use fakeid (0x100268e0) good hack Quote Link to comment Share on other sites More sharing options...
DarthRamone Posted February 11, 2015 Author Share Posted February 11, 2015 Thanks, but... I guess now I'll ask dumb question, but where is amd5000controller located? My bootable flash was made from *.arc with RDrive software (looks like it was stupid idea), I've found that instruction on Russian forum. Now I insert usb-flash to my mac mini and I can see only "Postinstall" folder. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.