MaMaRe Posted March 12, 2014 Author Share Posted March 12, 2014 Opa claro que aceitei a ajuda dele tanto que a DSDT dele ate onde eu entendo esta perfeita! EU estou aguardando ele me dizer agora o que eu faço... eu mesmo nao usando npci so aparece audio HDMI pra mim... pelo que vi no log acho que ele esta carregando via DSDT o audio mas nao entendo pq nao aparece... Dava pra você usar 2 OS X tranquilo, seria dual boot, o que não pode é ter 2 bootloader, tipo em 1 HD tem o Clover e outro o Chameleon, dai ferra geral. Mas com relação a AppleHDA para ALC888s, o Mirone te ofereceu ajuda, você topou em seguir o que ele ofereceu? Sobre o state C3, não precisa disso, apenas marcando P e C states já está bom. Por hora, claro, se precisar mesmo, dai você ativa. O Toleda fez uma: AppleHDA ALC888 Cara você tem que usar mais o "Search" do forum, se não vai depender da gente pra sempre. Entenda que estamos pra te ajudar, mas dá uma procurada mais a fundo no forum, aqui tem muita coisa que pode te ajudar. All@n acho que voce me entendeu mal... antes de postar esse topico eu ja tinha lido nao so aqui como no osx86, olaria, e ate no idioTon****, enfim o que eu mais faço é ir atras pesquisar, testar, enfim... eu ja tenho essa natureza de que voce nunca sabe tudo, mas sempre conhece alguem que sabe o que voce precisa... entao assim, pode ver que eu nao fico postando reply aqui sem antes testar, pesquisar, tentar denovo,,,,, Eu falei que estou esperando o mirone me dar uma luz, no sentido de que ele me ofereceu help e foi justamente porque voce e ele me mostraram algumas pedras pra atravessar o rio rs, que eu entendi o que estava rolando e focar em ler e pesquisar especificamente sobre isso, pra depois ir aprofundando e tal... eu agora estou lendo e entendendo a DSDT que o mirone me mandou, e comparando com a inst niresh q ta no outro HD (sim transplantei ela pra outro ai cada uma tem o seu cameleon e suas configs pra facilitar pra mim hehehe) entao eu acredito que agora sim tenho fonte de estudo rs... a proposito agora meu firefox esta apenas com 28 abas abertas com variados assuntos sobre isso... Link to comment Share on other sites More sharing options...
Allan Posted March 12, 2014 Share Posted March 12, 2014 Opa então beleza, continue assim. Apenas um incentivo Mas a kext do Toleda não funcionou? Faz assim, remova a VoodooHDA, depois instale a AppleHDA com o kext utility, e repare as permissões e recarregue o cache. Dai desliga, e ligue novamente após 1 minuto. Por incrível que pareça, isso funcionou comigo. Link to comment Share on other sites More sharing options...
MaMaRe Posted March 12, 2014 Author Share Posted March 12, 2014 Valeu All@n, incentivos, criticas, dicas, beliscao na orelha por errar, enfim... eu nao tenho problemas qto a isso, pelo contrario agradeço pela atenção :-) nessa instalação o voodooHDA nem passou perto do meu hd rs.... eu agora q vou testar a do toleda mas eu creio que ja sei o problema... logo quando instalei, aquela imagem RAW tem o clover e ela ja tava com inject audio com 2 AudioIDs, e eu agora nao estou usando nada disso... entao agora nem vou instalar nenhuma kext ainda, vou so seguir esse passo do toleda : ... 5. Chameleon/Chameleon Installer/Customize/Settings5a. Audio_ID = 1/HDEF Layout=15b. Audio_ID = 2/HDEF Layout=2 E meu palpite é que serei feliz rs... ja posto o resultado! Abs! Link to comment Share on other sites More sharing options...
MaMaRe Posted March 12, 2014 Author Share Posted March 12, 2014 Eis o resultado pior doque estava rs.... 2014-03-11 22:51:45 -0300 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_642014-03-11 22:51:45 -0300 kernel[0]: vm_page_bootstrap: 992865 free pages and 47519 wired pages2014-03-11 22:51:45 -0300 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]2014-03-11 22:51:45 -0300 kernel[0]: zone leak detection enabled2014-03-11 22:51:45 -0300 kernel[0]: "vm_compressor_mode" is 42014-03-11 22:51:45 -0300 kernel[0]: standard timeslicing quantum is 10000 us2014-03-11 22:51:45 -0300 kernel[0]: standard background quantum is 2500 us2014-03-11 22:51:45 -0300 kernel[0]: mig_table_max_displ = 742014-03-11 22:51:45 -0300 kernel[0]: NullCPUPowerManagement::init: properties=0xffffff800a6185802014-03-11 22:51:45 -0300 kernel[0]: NullCPUPowerManagement::start2014-03-11 22:51:45 -0300 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled2014-03-11 22:51:45 -0300 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled2014-03-11 22:51:45 -0300 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=2 Disabled2014-03-11 22:51:45 -0300 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Disabled2014-03-11 22:51:45 -0300 kernel[0]: calling mpo_policy_init for TMSafetyNet2014-03-11 22:51:45 -0300 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)2014-03-11 22:51:45 -0300 kernel[0]: calling mpo_policy_init for Sandbox2014-03-11 22:51:45 -0300 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)2014-03-11 22:51:45 -0300 kernel[0]: calling mpo_policy_init for Quarantine2014-03-11 22:51:45 -0300 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)2014-03-11 22:51:45 -0300 kernel[0]: Copyright © 1982, 1986, 1989, 1991, 19932014-03-11 22:51:45 -0300 kernel[0]: The Regents of the University of California. All rights reserved.2014-03-11 22:51:45 -0300 kernel[0]: MAC Framework successfully initialized2014-03-11 22:51:45 -0300 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers2014-03-11 22:51:45 -0300 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)2014-03-11 22:51:45 -0300 kernel[0]: IOAPIC: Version 0x20 Vectors 64:872014-03-11 22:51:45 -0300 kernel[0]: ACPI: sleep states S3 S4 S52014-03-11 22:51:45 -0300 kernel[0]: RTC: Only single RAM bank (128 bytes)2014-03-11 22:51:45 -0300 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x800000002014-03-11 22:51:45 -0300 kernel[0]: [ PCI configuration begin ]2014-03-11 22:51:45 -0300 kernel[0]: console relocated to 0xf890000002014-03-11 22:51:45 -0300 kernel[0]: [ PCI configuration end, bridges 6, devices 19 ]2014-03-11 22:51:45 -0300 kernel[0]: HWSensors Project Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved.2014-03-11 22:51:45 -0300 kernel[0]: FakeSMCDevice: 15 preconfigured key(s) added2014-03-11 22:51:45 -0300 kernel[0]: FakeSMCDevice: 0 key(s) exported from Clover EFI2014-03-11 22:51:45 -0300 kernel[0]: SMC: successfully initialized2014-03-11 22:51:45 -0300 kernel[0]: mcache: 2 CPU(s), 64 bytes CPU cache line size2014-03-11 22:51:45 -0300 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]2014-03-11 22:51:45 -0300 kernel[0]: Pthread support ABORTS when sync kernel primitives misused2014-03-11 22:51:45 -0300 kernel[0]: FireWire runtime power conservation disabled. (3)2014-03-11 22:51:45 -0300 kernel[0]: rooting via boot-uuid from /chosen: 927D83D1-37F6-3FD9-8D2D-5CD8AA948F112014-03-11 22:51:45 -0300 kernel[0]: Waiting on IOProviderClassIOResourcesIOResourceMatchboot-uuid-media2014-03-11 22:51:45 -0300 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start2014-03-11 22:51:45 -0300 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start2014-03-11 22:51:45 -0300 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded2014-03-11 22:51:45 -0300 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded2014-03-11 22:51:45 -0300 kernel[0]: vendor:device: 0x8086:0x10ce.2014-03-11 22:51:45 -0300 kernel[0]: AppleIntelE1000e(Info): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode2014-03-11 22:51:45 -0300 kernel[0]: AppleIntelE1000e(Info): changing MTU from 0 to 15002014-03-11 22:51:45 -0300 kernel[0]: FireWire (OHCI) VendorID 1106 ID 3403 PCI now active, GUID 009027000261801f; max speed s400.2014-03-11 22:51:45 -0300 kernel[0]: AppleIntelE1000e(Info): AppleIntelE1000e:WOL = 22014-03-11 22:51:45 -0300 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST3320613AS Media/IOGUIDPartitionScheme/OSx86 New@22014-03-11 22:51:45 -0300 kernel[0]: BSD root: disk1s2, major 1, minor 62014-03-11 22:51:45 -0300 kernel[0]: hfs: mounted 10.9.2 on device root_device2014-03-11 22:51:49 -0300 kernel[0]: Waiting for DSMOS...2014-03-11 22:51:53 -0300 kernel[0]: VM Swap Subsystem is ON2014-03-11 22:51:53 -0300 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 12014-03-11 22:51:54 -0300 kernel[0]: NVDAStartup: Web2014-03-11 22:51:54 -0300 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x02014-03-11 22:51:54 -0300 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)2014-03-11 22:51:54 -0300 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)2014-03-11 22:51:54 -0300 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)2014-03-11 22:51:54 -0300 kernel[0]: **** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xe400 ****2014-03-11 22:51:54 -0300 kernel[0]: **** [CSRBluetoothHostControllerUSBTransport][start] -- completed -- 0xe400 ****2014-03-11 22:51:54 -0300 kernel[0]: Sound assertion in AppleHDAController at line 13742014-03-11 22:51:54 -0300 kernel[0]: init2014-03-11 22:51:54 -0300 kernel[0]: probe2014-03-11 22:51:54 -0300 kernel[0]: start2014-03-11 22:51:54 -0300 kernel[0]: [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xe4002014-03-11 22:51:54 -0300 kernel[0]: [iOBluetoothHCIController][start] -- completed2014-03-11 22:51:54 -0300 kernel[0]: Previous Shutdown Cause: 52014-03-11 22:51:54 -0300 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode2014-03-11 22:51:54 -0300 kernel[0]: DSMOS has arrived2014-03-11 22:51:54 -0300 kernel[0]: VoodooPS2SynapticsTouchPad loaded2014-03-11 22:51:54 -0300 kernel[0]: ApplePS2Trackpad: ALPS GlidePoint v0.02014-03-11 22:51:54 -0300 kernel[0]: No interval found for . Using 80000002014-03-11 22:51:55 -0300 kernel[0]: Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: 0xffffff800bd9b900, fCodecRequest->command->verb: 0x100F0000, fPoweredDown: 02014-03-11 22:51:55 -0300 kernel[0]: Sound assertion in AppleHDAController at line 55392014-03-11 22:51:55 -0300 kernel[0]: Sound assertion in AppleHDAController at line 55402014-03-11 22:51:55 -0300 kernel[0]: Sound assertion in IOHDACodecDevice at line 1442014-03-11 22:51:55 -0300 kernel[0]: Sound assertion in IOHDACodecDevice at line 5502014-03-11 22:51:55 -0300 kernel[0]: Sound assertion in AppleHDAController at line 47722014-03-11 22:51:56 -0300 kernel[0]: AppleIntelE1000e(Info): e1000e NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx2014-03-11 22:51:56 -0300 kernel[0]: Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: 0xffffff800bd9b900, fCodecRequest->command->verb: 0x100F0000, fPoweredDown: 02014-03-11 22:51:56 -0300 kernel[0]: Sound assertion in AppleHDAController at line 55392014-03-11 22:51:56 -0300 kernel[0]: Sound assertion in AppleHDAController at line 55402014-03-11 22:51:56 -0300 kernel[0]: Sound assertion in IOHDACodecDevice at line 1442014-03-11 22:51:56 -0300 kernel[0]: Sound assertion in AppleHDACodecGeneric at line 1142014-03-11 22:51:56 -0300 kernel[0]: Sound assertion in IOHDACodecDevice at line 5502014-03-11 22:51:57 -0300 kernel[0]: hfs: mounted Niresh 10.9.0 on device disk1s32014-03-11 22:52:05 -0300 kernel[0]: NVDAGF100HAL loaded and registered2014-03-11 22:52:10 -0300 kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out2014-03-11 22:52:10 -0300 kernel[0]: [AGPM Controller] unknownPlatform2014-03-11 22:52:10 -0300 kernel[0]: ACPI_SMC_PlatformPlugin::gatherCStateOverrides - failed to set c-state demotion data: -12014-03-11 22:52:10 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 11162014-03-11 22:52:10 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 10912014-03-11 22:52:10 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 11162014-03-11 22:52:10 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 10912014-03-11 22:52:10 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 11162014-03-11 22:52:10 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 10912014-03-11 22:52:10 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 11162014-03-11 22:52:10 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 10912014-03-11 22:52:11 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 49822014-03-11 22:52:11 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 47532014-03-11 22:52:11 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 46502014-03-11 22:52:11 -0300 kernel[0]: Sound assertion in AppleHDADriver at line 4697 agora vamos passo a passo no tuto do Toleda Link to comment Share on other sites More sharing options...
Mirone Posted March 12, 2014 Share Posted March 12, 2014 Qual o problema? AppleHDA? Link to comment Share on other sites More sharing options...
MaMaRe Posted March 12, 2014 Author Share Posted March 12, 2014 Qual o problema? AppleHDA? Opa Fala Mirone! Entao eu creio que sim, porque eu tenho ate o audio HDMI da MOBO mas eu ainda nao entendi porque nao habilita a ALC888s. Eu tava lendo outro topico seu sobre AppleHDA que voce mandou um ALC888_notebook, o do Toleda tambem nao deu certo, mas nao descartando a possibilidade do dispositivo humano entre o teclado e a cadeira tambem estar fazendo algo errado rs... Eu agora vou resetar e testar com essa config aqui Link to comment Share on other sites More sharing options...
Mirone Posted March 12, 2014 Share Posted March 12, 2014 tenta isso:Arquivo Comprimido.zip instala dsdt+applehda. Link to comment Share on other sites More sharing options...
Allan Posted March 12, 2014 Share Posted March 12, 2014 Mirone, estava vendo essa AppleHDA, será que atualizando ela pra versão atual do Mavericks, seguindo seu tuto, não poderia resolver? Link to comment Share on other sites More sharing options...
Mirone Posted March 12, 2014 Share Posted March 12, 2014 Allan, tem que verificar se esta realmente vai funcionar. caso contrário não adianta atualizar. Link to comment Share on other sites More sharing options...
Allan Posted March 12, 2014 Share Posted March 12, 2014 Tá certo, vamos esperar o retorno dele. Vlw Link to comment Share on other sites More sharing options...
MaMaRe Posted March 12, 2014 Author Share Posted March 12, 2014 Galera obrigado pela paciencia... Mas tenho uma duvida meio que noob... se eu estou usando a DSDT certinha, entao eu nao uso HDAEnabler, ou estou errado? Vou testar os arquivos agora Mirone, ja posto o resultado. Valeu! Link to comment Share on other sites More sharing options...
Mirone Posted March 12, 2014 Share Posted March 12, 2014 isso, não precisa usar HDAEnabler. Link to comment Share on other sites More sharing options...
MaMaRe Posted March 12, 2014 Author Share Posted March 12, 2014 Mirone tambem nao deu certo... 2014-03-12 20:02:05 -0300 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode2014-03-12 20:02:05 -0300 kernel[0]: Sound assertion in AppleHDAController at line 13352014-03-12 20:02:05 -0300 kernel[0]: DSMOS has arrived2014-03-12 20:02:05 -0300 kernel[0]: VoodooPS2SynapticsTouchPad loaded2014-03-12 20:02:06 -0300 kernel[0]: ApplePS2Trackpad: ALPS GlidePoint v0.02014-03-12 20:02:06 -0300 kernel[0]: No interval found for . Using 80000002014-03-12 20:02:06 -0300 kernel[0]: Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: 0xffffff800bff7600, fCodecRequest->command->verb: 0x100F0000, fPoweredDown: 02014-03-12 20:02:06 -0300 kernel[0]: Sound assertion in AppleHDAController at line 54592014-03-12 20:02:06 -0300 kernel[0]: Sound assertion in AppleHDAController at line 54602014-03-12 20:02:06 -0300 kernel[0]: Sound assertion in IOHDACodecDevice at line 1612014-03-12 20:02:06 -0300 kernel[0]: Sound assertion in IOHDACodecDevice at line 5672014-03-12 20:02:06 -0300 kernel[0]: Sound assertion in AppleHDAController at line 46932014-03-12 20:02:06 -0300 kernel[0]: AppleIntelE1000e(Info): e1000e NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx2014-03-12 20:02:07 -0300 kernel[0]: Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: 0xffffff800bff7600, fCodecRequest->command->verb: 0x100F0000, fPoweredDown: 02014-03-12 20:02:07 -0300 kernel[0]: Sound assertion in AppleHDAController at line 54592014-03-12 20:02:07 -0300 kernel[0]: Sound assertion in AppleHDAController at line 54602014-03-12 20:02:07 -0300 kernel[0]: Sound assertion in IOHDACodecDevice at line 1612014-03-12 20:02:07 -0300 kernel[0]: Sound assertion in AppleHDACodecGeneric at line 1322014-03-12 20:02:07 -0300 kernel[0]: Sound assertion in IOHDACodecDevice at line 5672014-03-12 20:02:08 -0300 kernel[0]: hfs: mounted Niresh 10.9.0 on device disk1s32014-03-12 20:02:14 -0300 kernel[0]: GeforceSensors: still waiting for accelerator to start...2014-03-12 20:02:19 -0300 kernel[0]: NVDAGF100HAL loaded and registered2014-03-12 20:02:21 -0300 kernel[0]: [AGPM Controller] unknownPlatform2014-03-12 20:02:22 -0300 kernel[0]: GeForceSensors (pci1): chipset: GF108 (NVC1) bios: 70.08.34.002014-03-12 20:02:22 -0300 kernel[0]: GeForceSensors (pci1): started Assim, o que eu posso te passar pra voce conseguir me dizer se alguma kext ta interferindo, enfim... algum log tipo do IOExplorer ou sei la... Eu realmente nao vejo motivo para nao ter funcionado... Valeu! OBS.: meu boot.plist agora foi esse org.chameleon.Boot.plist.zip Link to comment Share on other sites More sharing options...
Allan Posted March 12, 2014 Share Posted March 12, 2014 Em "Som", que está em Preferências do Sistema, não tem Fones Internos? As vezes comigo, tinha esse problema, o audio estava ativado, mas não selecionado em "Som". Link to comment Share on other sites More sharing options...
MaMaRe Posted March 12, 2014 Author Share Posted March 12, 2014 All@n, o som onboard nao aparece no Relatorio de sistema nem em nenhum outro lugar... olhae como aparece aqui pra mim Link to comment Share on other sites More sharing options...
Allan Posted March 12, 2014 Share Posted March 12, 2014 E esses Soundflower? Me manda seu DSDT. Link to comment Share on other sites More sharing options...
MaMaRe Posted March 12, 2014 Author Share Posted March 12, 2014 Esses SoundFlower's sao de um programa estilo TeamViewer (so que pra uso via Smartphone ele é mais leve), chama Splashtop Streamer. tenta isso:Arquivo Comprimido.zip instala dsdt+applehda. estou usando os arquivos que o mirone me enviou ontem. Link to comment Share on other sites More sharing options...
Allan Posted March 12, 2014 Share Posted March 12, 2014 Entendi. Vou dar mais uma olhada por ai, já que esse metodo do Mirone não deu certo, vamos esperar... Link to comment Share on other sites More sharing options...
Mirone Posted March 12, 2014 Share Posted March 12, 2014 me envie uma copia do seu ioreg com a kext instalada. Link to comment Share on other sites More sharing options...
Allan Posted March 13, 2014 Share Posted March 13, 2014 Achei uma, tenta ai. 2449-AppleHDA.kext.zip Link to comment Share on other sites More sharing options...
MaMaRe Posted March 13, 2014 Author Share Posted March 13, 2014 (edited) Achei uma, tenta ai. 2449-AppleHDA.kext.zip Valeu All@n, essa e do osx86.net? nao lembro... mas eu tenho essa e ja testei com ela tambem rs... e nao deu me envie uma copia do seu ioreg com a kext instalada. Valeu Mirone! Segue em anexo! iMac de Roberto.ioreg.zip Edited March 13, 2014 by MaMaRe Link to comment Share on other sites More sharing options...
Mirone Posted March 13, 2014 Share Posted March 13, 2014 tenta esta: Arquivo Comprimido.zip lembra de excluir a flag npci=0x2000/3000. Link to comment Share on other sites More sharing options...
MaMaRe Posted March 13, 2014 Author Share Posted March 13, 2014 Cara o sistema ficou louco com esses ultimos arquivos... so agora consegui voltar ele... qdo vai ate o fim do boot fica tela preta.... enfim tai um log pra ver se vcs me ajudam... ERROS.txt Link to comment Share on other sites More sharing options...
Allan Posted March 13, 2014 Share Posted March 13, 2014 Está usando GE=Yes no boot.plist? Link to comment Share on other sites More sharing options...
MaMaRe Posted March 13, 2014 Author Share Posted March 13, 2014 Nao so nvda_drv=1 Link to comment Share on other sites More sharing options...
Recommended Posts