Clover General discussion

[STLVNUB]

Anybody With A 100% Working EFI For Sonoma Please Send It To Me Thanks

[Slice]

55 minutes ago, STLVNUB said:

Anybody With A 100% Working EFI For Sonoma Please Send It To Me Thanks

For example. This is my Skylake computer. SN changed.

EFI-slice.7z

[STLVNUB]

1 minute ago, Slice said:

For example. This is my Skylake computer. SN changed.

EFI-slice.7z 1.43 MB · 0 downloads

Thanks

[Slice]

Boot->Debug set to true for your test. You should set it to false finally.

And this is my DSDT. You should exclude it.

[STLVNUB]

42 minutes ago, Slice said:

Boot->Debug set to true for your test. You should set it to false finally.

And this is my DSDT. You should exclude it.

Thanks

[Slice]

One more note. There is DMAR.aml in the /EFI/CLOVER/ACPI/patched folder. Exclude it as it is hardware dependent for my computer.

[Jief_Machak]

Hi everyone,

I'm in the process to upgrade the OpenCore component of Clover to the latest 0.9.7.

It means that I will have to do a dozen of commits before you can try it.

 

I'm just saying that to avoid you wasting time compiling and trying.

 

I'll post a new message as soon as it is supposed to work. Should be in the next 48 hours.

[Jief_Machak]

The sync with OC 0.9.7 is done. It was quite a big job so mistakes and bugs can always slip in.

So please, everyone who'd like to help, try : CloverX64-2024-01-02-19-36-23-b204910-dirty-jief0.9.7.zip

If it works for you, great.

If it doesn't, DO NOT CHANGE anything to your config yet. There was no changes about configuration, so if it doesn't work : it's a bug.

In the case, send me your log.

 

NOTE : for everyone who need BlockSkyWalk. I don't know yet if it resolve the issue, but it's suppose to (unless OC has the same issue).

 

When it's successful, I'll move the master branch to this new version.

 

Thanks.

[fabiosun]

21 minutes ago, Jief_Machak said:

NOTE : for everyone who need BlockSkyWalk. I don't know yet if it resolve the issue, but it's suppose to (unless OC has the same issue).

Archive.zip

with OC it works well

attached preboot and usual log

 

[Slice]

1 hour ago, Jief_Machak said:

The sync with OC 0.9.7 is done. It was quite a big job so mistakes and bugs can always slip in.

So please, everyone who'd like to help, try : CloverX64-2024-01-02-19-36-23-b204910-dirty-jief0.9.7.zip

If it works for you, great.

If it doesn't, DO NOT CHANGE anything to your config yet. There was no changes about configuration, so if it doesn't work : it's a bug.

In the case, send me your log.

 

NOTE : for everyone who need BlockSkyWalk. I don't know yet if it resolve the issue, but it's suppose to (unless OC has the same issue).

 

When it's successful, I'll move the master branch to this new version.

 

Thanks.

My test was successful. 

 

46 minutes ago, mariosun said:

Archive.zip 30.5 kB · 1 download

with OC it works well

attached preboot and usual log

 

What did you mean about "with OC"?

[Jief_Machak]

1 hour ago, mariosun said:

Archive.zip 30.5 kB · 0 downloads

with OC it works well

attached preboot and usual log

 

@mariosun did that just hang at +++++++++++++++++++++++++++++++++++, or did the kernel started and crash ?

 

So you have a working OC configuration. Great ! What version do you use ?

Could you try this OpenCore efi : OpenCore-v0.9.7.efi

and this <<deleted>>

The first one is the official DEBUG version of OC downloaded from their github,

The second one is one compiled by me.

The point of the test is to rule out compilation problems, and make sure that OC 0.9.7 works in your case.

Please send me the log produced by OpenCore_jief.efi

 

Thanks for your help.

 

EDIT : sorry, made a mistake wuth the second file. I'll post it soon.

Edited January 2, 2024 by Jief_Machak

[fabiosun]

8 minutes ago, Jief_Machak said:

did that just hang at

Just hang 

8 minutes ago, Jief_Machak said:

and this OpenCore_jief.efi.zip

Have I to use this efi file with my working opencore efi?

and then to send opencore log?

 

10 minutes ago, Jief_Machak said:

Thanks for your help

thank you 

24 minutes ago, Slice said:

What did you mean about "with OC"?

Opencore bootloader 

latest and previous version

 

[Jief_Machak]

@mariosun Here is the second efi I'd like you to test : OpenCore_jief.efi.zip

Thanks again.

[Jief_Machak]

27 minutes ago, mariosun said:

Have I to use this efi file with my working opencore efi?

and then to send opencore log?

Yes, put it in your working OpenCore folder (reminder : if you use BootloaderChooser, you can keep the name "OpenCore_jief.efi", or whatever you like, and select the efi to boot)

You may also create a boot entry in your bios. Of course, you can rename it OpenCore.efi to use the default.

Edited January 2, 2024 by Jief_Machak

[MakAsrock]

2 hours ago, Jief_Machak said:

The sync with OC 0.9.7 is done. It was quite a big job so mistakes and bugs can always slip in.

So please, everyone who'd like to help, try : CloverX64-2024-01-02-19-36-23-b204910-dirty-jief0.9.7.zip

If it works for you, great.

If it doesn't, DO NOT CHANGE anything to your config yet. There was no changes about configuration, so if it doesn't work : it's a bug.

In the case, send me your log.

 

NOTE : for everyone who need BlockSkyWalk. I don't know yet if it resolve the issue, but it's suppose to (unless OC has the same issue).

 

When it's successful, I'll move the master branch to this new version.

 

Thanks.

It works great for may profile system including quirk BlockSkyWalk. Thank you very much for the good work!

2024-01-02_21-08_BOOTX64.EFI.log preboot.log

[fabiosun]

49 minutes ago, Jief_Machak said:

Here is the second efi I'd like you to test : OpenCore_jief.efi.zip

opencore-2024-01-02-212028.txt.zip

it does not reach opencore bootmenu (black screen)

 

this below is with original Opencore efi (debug 097 version)

opencore-2024-01-02-212140.txt.zip

Edited January 2, 2024 by mariosun

[MakAsrock]

1 hour ago, Jief_Machak said:

@mariosun Here is the second efi I'd like you to test : OpenCore_jief.efi.zip

Thanks again.

With this (OpenCore_jief.efi) boot was unsuccessful, for an unknown reason. Logs were not created.

[Jief_Machak]

@mariosun Can you try this OpenCore3.efi?. Thanks.

53 minutes ago, MakAsus said:

With this (OpenCore_jief.efi) boot was unsuccessful, for an unknown reason. Logs were not created.

Thanks for the test. I found the log problem, I think.

Can you try : OpenCore3.efi

[MakAsrock]

14 minutes ago, Jief_Machak said:

@mariosun Can you try this OpenCore3.efi?. Thanks.

Thanks for the test. I found the log problem, I think.

Can you try : OpenCore3.efi

Here is the boot log, with your corrected OpenCore3.efi

opencore-2024-01-02-230406.txt.zip

[anonymous writer]

Hello @Slice

With the latest Clover build, my FENVI FW-T919 works perfectly under Sonoma.
Thanks for your work on Clover.

[fabiosun]

@Jief_Machak

thank for your effort

this is the log for opencore3.efi:

opencore-2024-01-03-065030.zip

better than opencore2.efi (now i see standard initial opencore debug line)

Same black screen when i should see my openCore graphical interface

 

Happy that it is working for others intel users who have problem before

 

Maybe for AM5* (amd latest platform) problem is to deep to rule

 

* i specify AM5 because this platform has also other problem with Clover bootloader (no perfect audio)
i add some link if you missed them (not useful for problem you are trying to solve by now)

 

Funny thing is that also Opencore bootloader had this problem and AMD comunity solved this problem using some Clover Bootloader code to patch opencore

Clover code used in OpenCore:

https://github.com/CloverHackyColor/CloverBootloader/blob/master/rEFIt_UEFI/Platform/cpu.cpp#L960

 

opencore merged pull request:

https://github.com/acidanthera/OpenCorePkg/pull/396

 

 

[MakAsrock]

if someone wants to compile the CloverBootloader branch of jief themselves without waiting for a commit or release, here is a console file that will download everything that is needed from the repository:

jiefclovergit
Everything compiled for me and works fine.

Edited January 3, 2024 by MakAsus

[Jief_Machak]

@mariosun it looks like I have taken theses modification.

Can you tell me exactly what version of OpenCore works ? Have compiled it yourself ? Have you taken it from the repo ? Which version ?

[Jief_Machak]

33 minutes ago, MakAsus said:

if someone wants to compile the CloverBootloader branch of jief themselves without waiting for a commit or release, here is a console file that will download everything that is needed from the repository:

jiefclovergit
Everything compiled for me and works fine.

Yes, I put everything in a branch. But I didn't know if buildme would switch back to master.

 

Glad it's working.

 

Seems to work at least as well as the previous version so I think I can commit these modification into master.

[fabiosun]

34 minutes ago, Jief_Machak said:

Can you tell me exactly what version of OpenCore works ?

all versions (github release/debug) or the ones i can download from github action)

now i am using this:

 

@jsl2000sorry to ping you

have you tested latest jief version on your AMD platform?

curious if it works well in old platform than AM5