Clover General discussion

[MifJpnAlphaPlus]

2 hours ago, MifJpnAlphaPlus said:

That's excellent.

Thnak you so so much.

 

I confirmed the startup on BigSir and Monterey too.

[Guest 5T33Z0]

3 hours ago, LockDown said:

 

Whats wrong with the 10th Gen before Slice's CLOVERX64?

 

Ventura would no boot. Seemed to be related to HWTarget.

Edited June 29, 2022 by 5T33Z0

[Dmitriy85]

I failed to launch ventura on the 11th generation

config.plist.zip

[Slice]

15 minutes ago, Dmitriy85 said:

I failed to launch ventura on the 11th generation

config.plist.zip 5.5 kB · 0 downloads

Which Clover?

[Anto65]

16 hours ago, Slice said:

This clover can boot Mojave and Ventura with the same config as iMacPro1,1.

Waiting for more tests.

CLOVERX64.efi.zip 741.25 kB · 31 downloads

💪 Also fixed the problem mentioned here https://www.insanelymac.com/forum/topic/351969-pre-release-macos-ventura/?do=findComment&comment=2787305  with MacPro 7.1  and  devalidation of the Nvram 

 

[Dmitriy85]

17 minutes ago, Slice said:

Which Clover?

master comit 0f50b36

 

[Slice]

9 minutes ago, Dmitriy85 said:

master comit 0f50b36

 

No, I failed to commit significant changes. Take ready-to-use https://www.insanelymac.com/applications/core/interface/file/attachment.php?id=382878&key=dff670f2c2a5d352772bb9dbc1e49c0f

 

[Dmitriy85]

9 minutes ago, Slice said:

No, I failed to commit significant changes. Take ready-to-use https://www.insanelymac.com/applications/core/interface/file/attachment.php?id=382878&key=dff670f2c2a5d352772bb9dbc1e49c0f

 

unfortunately, there is also no download, the download log is attached2022-06-29_09-59_BOOTX64.EFI.log.zip

[Slice]

2 hours ago, Dmitriy85 said:

unfortunately, there is also no download, the download log is attached2022-06-29_09-59_BOOTX64.EFI.log.zip

This is not my Clover

0:103  0:000  Starting Clover revision: 5146 (master, commit 0f50b3644) on American Megatrends EFI
0:103  0:000  Build id: 20220628222028-0f50b36
0:103  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -D LESS_DEBUG -t GCC53 | --cmd-len=50000 -D NO_GRUB_DRIVERS_EMBEDDED -D LESS_DEBUG --conf=/Users/runner/work/CloverBootloader/CloverBootloader/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 4 | OS: 

 

[MifJpnAlphaPlus]

2 hours ago, Dmitriy85 said:

unfortunately, there is also no download, the download log is attached2022-06-29_09-59_BOOTX64.EFI.log.zip

hello.
If you can't download from here.
Please download it from here as well.

 

https://mifmif.mydns.jp/pcpc/public/alpha/CLOVERX64-slice-local-2206291110.efi.zip

 

Let's put it in COLVERX64.efi and BOOX64.efi.
I hope it goes well!

[Dmitriy85]

25 minutes ago, MifJpnAlphaPlus said:

hello.
If you can't download from here.
Please download it from here as well.

 

https://mifmif.mydns.jp/pcpc/public/alpha/CLOVERX64-slice-local-2206291110.efi.zip

 

Let's put it in COLVERX64.efi and BOOX64.efi.
I hope it goes well!

in your archive only CLOVERX64.efi. BOOTX64.efi. no. give me both files please

[Slice]

cp -v CLOVERX64.efi BOOTX64.efi

 

[Dmitriy85]

44 minutes ago, Slice said:

This is not my Clover

0:103  0:000  Starting Clover revision: 5146 (master, commit 0f50b3644) on American Megatrends EFI
0:103  0:000  Build id: 20220628222028-0f50b36
0:103  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -D LESS_DEBUG -t GCC53 | --cmd-len=50000 -D NO_GRUB_DRIVERS_EMBEDDED -D LESS_DEBUG --conf=/Users/runner/work/CloverBootloader/CloverBootloader/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 4 | OS: 

 

I replaced only CLOVERX64.efi from your post.

[Slice]

5 minutes ago, Dmitriy85 said:

I replaced only CLOVERX64.efi from your post.

I see.

[MifJpnAlphaPlus]

16 minutes ago, Dmitriy85 said:

I replaced only CLOVERX64.efi from your post.

hello.
In UEFI it is first run from BOOTX64.efi.

To boot from other efi, there is CLOVERX64.efi too.

Copy CLOVERX64.efi to the BOOT folder and rename it BOOTX64.efi.

Actually, these two are the same contents of Cloverx64.efi, so we just use the Clover name for clarity.

Good luck!

Edited June 29, 2022 by MifJpnAlphaPlus

[Dmitriy85]

20 minutes ago, MifJpnAlphaPlus said:

hello.
In UEFI it is first run from BOOTX64.efi.

To boot from other efi, there is CLOVERX64.efi too.

Copy CLOVERX64.efi to the BOOT folder and rename it BOOTX64.efi.

Actually, these two are the same contents of Cloverx64.efi, so we just use the Clover name for clarity.

Good luck!

it turned out to boot, but the download takes longer than in other systems. Hangs on the black screen for 20 seconds, then goes to the desktop. There is no such thing with OrenCore

 

Spoiler

 

[MifJpnAlphaPlus]

21 minutes ago, Dmitriy85 said:

it turned out to boot, but the download takes longer than in other systems. Hangs on the black screen for 20 seconds, then goes to the desktop. There is no such thing with OrenCore

 

  Hide contents

 

Hello
It's very nice to have booted Ventura.

Everyone thank you for testing the 11th CPU.

I think there are two reasons why it takes time.

1. Are you run CLOVER in a medium that is slow to read and write, such as a USB memory stick?

2. Set Boot-> Debug to false. If the writing media is slow, it will take a lot of time.

Please check the above.

Thank you.

[Dmitriy85]

30 minutes ago, MifJpnAlphaPlus said:

Hello
It's very nice to have booted Ventura.

Everyone thank you for testing the 11th CPU.

I think there are two reasons why it takes time.

1. Are you run CLOVER in a medium that is slow to read and write, such as a USB memory stick?

2. Set Boot-> Debug to false. If the writing media is slow, it will take a lot of time.

Please check the above.

Thank you.

the disk I have is an nvme SSD. debugging is disabled. OpenСore loads in 14 seconds. Clover is twice as long. Monterey both loaders load equally fast

 

[MifJpnAlphaPlus]

31 minutes ago, Dmitriy85 said:

the disk I have is an nvme SSD. debugging is disabled. OpenСore loads in 14 seconds. Clover is twice as long. Monterey both loaders load equally fast

 

Hello
At what stage of boot is it taking a long time?

I'm not good at English, so please tell me.

 

First, is it possible to switch to Verbose mode?
To do so, just add -v to Bootaug.

 

1. Time to load the Clover itself.

2. The time until the Ventura launch selection icon appears.

3. The time it takes to stop in the middle of the macOS boot log after the boot icon is pressed. (If so, take a picture)

4. The time when the Apple mark appears and the progress bar appears. (Before the login screen.)

 

If 3 and 4 are the problem, and
If I were, make sure all Kexts are development versions.

 

And if there are no other noticeable problems, do this.
I run it once in debug mode.
I copy Clover's EFI.
Delete the serial-number sm-uuid on config.plist.
I'll compress it and put it here.

 

Everyone here is kind. Maybe they will look for something. (I do too)

 

Good luck.

 

[Jief_Machak]

I need an internal wifi card and a USB to ethernet adapter. Anyone knows what to buy so it'll be compatible with macos (from high sierra) ? Or any forum where I can ask ?

Thanks.

[arcade33]

this one : https://www.ebay.fr/itm/174224694910

 

Operating Systems:

Hackintosh
Windows 7
Windows 8
Windows 10
Windows 11
OS X Yosemite 10.10.5
OS X EI Capitan 10.11.6
MacOS Sierra 10.12.6
MacOS High Sierra 10.13.6
MacOS Mojave 10.14.6
MacOS Catalina 10.15.7
MacOS Big Sur 11.6.1
MacOS Monterey 12.0.1

Free driver for Mac OS,Hackintosh system(plug and play),If you need the driver for Windows system,please contact our customer service

[Mikhail Opekunov]

On 6/28/2022 at 8:21 PM, Slice said:

This clover can boot Mojave and Ventura with the same config as iMacPro1,1.

Waiting for more tests.

Thanks! successful boot! 

 

intel 10 gen - iMac 20_2

[odemolay]

@Slice @Jief_Machak thank you again

 

I didn't know that you had to rename CLOVERX64 to BOOTX64 to put it in the BOOT folder. I only replaced the one in the Clover folder... shame on me. now with 0xFFF and this commit is working fine. Thanks again.

 

I removed FSinject from my EFI folder and unchecked in the plist: inject kext by the way.

 

so Z170 Smbios iMacPro 1,1 is all good

 

 

 

 

 

 

 

config.plist.zip

Edited June 30, 2022 by odemolay

[Dmitriy85]

8 hours ago, MifJpnAlphaPlus said:

Hello
At what stage of boot is it taking a long time?

I'm not good at English, so please tell me.

 

First, is it possible to switch to Verbose mode?
To do so, just add -v to Bootaug.

 

1. Time to load the Clover itself.

2. The time until the Ventura launch selection icon appears.

3. The time it takes to stop in the middle of the macOS boot log after the boot icon is pressed. (If so, take a picture)

4. The time when the Apple mark appears and the progress bar appears. (Before the login screen.)

 

If 3 and 4 are the problem, and
If I were, make sure all Kexts are development versions.

 

And if there are no other noticeable problems, do this.
I run it once in debug mode.
I copy Clover's EFI.
Delete the serial-number sm-uuid on config.plist.
I'll compress it and put it here.

 

Everyone here is kind. Maybe they will look for something. (I do too)

 

Good luck.

 

I recorded a video of the whole process, I think it will be clearer this way. I also attached the EFI folder on Google drive

https://drive.google.com/drive/folders/1cwYf5z0Vt74v5JQhgCVwLTizTdzg8X90?usp=sharing

[jsl2000]

18 hours ago, Slice said:

No, I failed to commit significant changes. Take ready-to-use https://www.insanelymac.com/applications/core/interface/file/attachment.php?id=382878&key=dff670f2c2a5d352772bb9dbc1e49c0f

 

Thanks, Both versions of Clover-5146-2c28c23fd & 5147-5f44b37c8 can boot Ventura to desktop at Ventura, but Clover-5146-2dxx failed in my Ryzen 1700X hackintosh.

Edited June 30, 2022 by jsl2000