chris1111 Posted December 3, 2020 Share Posted December 3, 2020 1 minute ago, PG7 said: yes Nvidia Geforce works well until Catalina with the patches, I have the GTX XFX 280 and on the laptop I have the GT 320M that work but with the Inject Nvidia I can even Clover r5119 but with Clover r5125 and r5127 I can no longer activate the Nvidia legacy because when placing the Nvidia Inject the screen goes black where with previous versions it works very well! - attention because I was curious and tested with the pc (hackintosh) where I have the ATI Radeon and with the ATI inject it works a thousand nuts .. something in Clover has been changed and the Nvidia inject is not doing as before Strange because its Work as the same here Older Clover and Clover OC Integration? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746174 Share on other sites More sharing options...
PG7 Posted December 3, 2020 Share Posted December 3, 2020 11 minutes ago, chris1111 said: Clover OC plus anciens? Clover yes works until version r5119 I have not tested the r5120 / 21/22 but the r5125 / 26/27 does not work !!! Opencore NOT with the Nvidia inject ... Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746177 Share on other sites More sharing options...
chris1111 Posted December 3, 2020 Share Posted December 3, 2020 2 minutes ago, PG7 said: Clover yes works until version r5119 I have not tested the r5120 / 21/22 but the r5125 / 26/27 does not work !!! Opencore NOT with the Nvidia inject ... Look Spoiler Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746178 Share on other sites More sharing options...
PG7 Posted December 3, 2020 Share Posted December 3, 2020 4 minutes ago, chris1111 said: 6 minutes ago, PG7 said: Clover yes works until version r5119 I have not tested the r5120 / 21/22 but the r5125 / 26/27 does not work !!! Opencore NOT with the Nvidia inject ... Look you could give me this Boot.efi + Clover.efi and Config.plist (delete SMBIOS) just for me to test here because yesterday I lost a lot of time again and I always find the same error, I had already kidnapped Jieff, Tell me your PC isn't it UEFI? because I'm on the Laptop with Legacy! Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746179 Share on other sites More sharing options...
chris1111 Posted December 3, 2020 Share Posted December 3, 2020 Just now, PG7 said: you could give me this Boot.efi + Clover.efi and Config.plist (delete SMBIOS) just for me to test here because yesterday I lost a lot of time again and I always find the same error, I had already kidnapped Jieff, Tell me your PC isn't it UEFI? because I'm on the Laptop with Legacy! Iam on PC Dell Optiplex 790 Legacy Install ESP no boot.efi I'm using the Apple boot.efi Its not the dosdude1 patch for real Mac see on GitHub I have put the EFI folder I'm using 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746180 Share on other sites More sharing options...
PG7 Posted December 3, 2020 Share Posted December 3, 2020 I'm also being stupid ... because I also have a patch on the DSDT for Nvidia (cosmetic) but even so with the real ID of Nvidia MAYBE be the mistake! now i'm doing a test installation on the Dell M93p Desktop with the Nvidia GTX760 which could not complete the installation for him but i think i found the solution also to the error where he at 12 minutes makes an error and if it is the case i found the error that many are to have and without finding the solution !!! Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746181 Share on other sites More sharing options...
chris1111 Posted December 3, 2020 Share Posted December 3, 2020 9 minutes ago, PG7 said: I'm also being stupid ... because I also have a patch on the DSDT for Nvidia (cosmetic) but even so with the real ID of Nvidia MAYBE be the mistake! now i'm doing a test installation on the Dell M93p Desktop with the Nvidia GTX760 which could not complete the installation for him but i think i found the solution also to the error where he at 12 minutes makes an error and if it is the case i found the error that many are to have and without finding the solution !!! GTX 760 is not working with the patch Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746182 Share on other sites More sharing options...
PG7 Posted December 3, 2020 Share Posted December 3, 2020 4 minutes ago, chris1111 said: GTX 760 is not working with the patch is native Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746183 Share on other sites More sharing options...
chris1111 Posted December 3, 2020 Share Posted December 3, 2020 Just now, PG7 said: is native Yes Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746184 Share on other sites More sharing options...
Matgen84 Posted December 4, 2020 Share Posted December 4, 2020 (edited) Hi @Slice @Jief_Machak On Big Sur 11.1 Beta 1, I try to update to Clover r5127 - commit 349e56a: my HDD name Big Sur is displayed twice in the windows target ! I don't know what is it. Can you tell me why, please. Spoiler EDIT: I can boot r5127 commit 349e56 from USB pendrive. After copy/paste EFI Folder (from USB to my HDD in EFI), can't boot from my Z390 HDD stuck at Clover GUI ! Edited December 4, 2020 by Matgen84 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746204 Share on other sites More sharing options...
Slice Posted December 4, 2020 Share Posted December 4, 2020 Anyway "can't boot" should be illustrated by a log. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746206 Share on other sites More sharing options...
chris1111 Posted December 4, 2020 Share Posted December 4, 2020 (edited) 2 hours ago, Matgen84 said: Hi @Slice @Jief_Machak On Big Sur 11.1 Beta 1, I try to update to Clover r5127 - commit 349e56a: my HDD name Big Sur is displayed twice in the windows target ! I don't know what is it. Can you tell me why, please. Reveal hidden contents I think probably you have a snapshot of BigSur drive? Edited December 4, 2020 by chris1111 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746214 Share on other sites More sharing options...
naiclub Posted December 4, 2020 Share Posted December 4, 2020 2 hours ago, Matgen84 said: Hi @Slice @Jief_Machak On Big Sur 11.1 Beta 1, I try to update to Clover r5127 - commit 349e56a: my HDD name Big Sur is displayed twice in the windows target ! I don't know what is it. Can you tell me why, please. Hide contents EDIT: I can boot r5127 commit 349e56 from USB pendrive. After copy/paste EFI Folder (from USB to my HDD in EFI), can't boot from my Z390 HDD stuck at Clover GUI ! Do you have 2 drives? The capacity is not equal. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746216 Share on other sites More sharing options...
iCanaro Posted December 4, 2020 Share Posted December 4, 2020 2 hours ago, Matgen84 said: I can boot r5127 commit 349e56 from USB pendrive. After copy/paste EFI Folder (from USB to my HDD in EFI), can't boot from my Z390 HDD stuck at Clover GUI ! I use this release of Clover on all hacks and I updated bigbugs on the Z68, Z97, Z370 and X570 without any particular difficulty. As a theme I use OCintegration and Neon 3 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746217 Share on other sites More sharing options...
Matgen84 Posted December 4, 2020 Share Posted December 4, 2020 6 minutes ago, chris1111 said: I think probably you have a snapshot of BigSur drive? @chris1111 Yes, , I have. How to know which is the correct one to update clover because the name is the same? And above all why, Clover detects it as an installable disk? Clover should not be able to offer to install over a snapshot. My main problem is: I can boot BS 11.1 Beta from Clover r5127 - commit 349e56a with USB pen drive, not with HDD 7 minutes ago, naiclub said: Do you have 2 drives? The capacity is not equal. I have : Big Sur 11.1 Beta 1 on a drive (1To) and Windows 10 on a another drive (2To). 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746218 Share on other sites More sharing options...
Matgen84 Posted December 4, 2020 Share Posted December 4, 2020 23 minutes ago, iCanaro said: I use this release of Clover on all hacks and I updated bigbugs on the Z68, Z97, Z370 and X570 without any particular difficulty. As a theme I use OCintegration and Neon Hi @iCanaro I turned off the hack to go shopping for food. On the way back I turned it on again: miracle, I can boot BS 11.1 Beta 1 from Clover r5127 - commit 349e56a. It's very strange !I checked my config.plist which worked fine before. The only thing I haven't done is update the BIOS release F11L to the latest Beta F11m ... Any ideas, please ? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746221 Share on other sites More sharing options...
iCanaro Posted December 4, 2020 Share Posted December 4, 2020 mmmm might be an idea to say that Clover was hungry and on his return with groceries he was happy and started working again??? or maybe since the Z390s have capricious NVRAM, it's now back to work. 5 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746223 Share on other sites More sharing options...
Matgen84 Posted December 4, 2020 Share Posted December 4, 2020 14 minutes ago, iCanaro said: mmmm might be an idea to say that Clover was hungry and on his return with groceries he was happy and started working again??? or maybe since the Z390s have capricious NVRAM, it's now back to work. Grazie @iCanaro I think too the Z390 have capricious NVRAM. My mobo was more stable before with the old clover, and reddestDream's OcQuirks.efi Question: how to have a stable Z390 with Clover ? 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746224 Share on other sites More sharing options...
iCanaro Posted December 4, 2020 Share Posted December 4, 2020 34 minutes ago, Matgen84 said: Grazie @iCanaro I think too the Z390 have capricious NVRAM. My mobo was more stable before with the old clover, and reddestDream's OcQuirks.efi Question: how to have a stable Z390 with Clover ? apart from these snags in the GUI at boot, or that can be had when running several tests with beta versions; then you have instability in the daily use of macOS on the Z390? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746225 Share on other sites More sharing options...
Matgen84 Posted December 4, 2020 Share Posted December 4, 2020 1 minute ago, iCanaro said: apart from these snags in the GUI at boot, or that can be had when running several tests with beta versions; then you have instability in the daily use of macOS on the Z390? I don't daily use Big Sur 11.1 Beta, but once I'm on BS the system seems stable. No random reboots, no screen freezes or whatever. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746226 Share on other sites More sharing options...
Slice Posted December 4, 2020 Share Posted December 4, 2020 38 minutes ago, Matgen84 said: Grazie @iCanaro I think too the Z390 have capricious NVRAM. My mobo was more stable before with the old clover, and reddestDream's OcQuirks.efi Question: how to have a stable Z390 with Clover ? Same as with OC: we have to use SSDT-PMC https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/AcpiSamples/SSDT-PMC.dsl 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746227 Share on other sites More sharing options...
Matgen84 Posted December 4, 2020 Share Posted December 4, 2020 5 minutes ago, Slice said: Same as with OC: we have to use SSDT-PMC https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/AcpiSamples/SSDT-PMC.dsl Thanks. I use the SSDT-PMC since few month. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746228 Share on other sites More sharing options...
Slice Posted December 4, 2020 Share Posted December 4, 2020 I don't know what else. ProvideConsoleGop=YES. All as usual. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746229 Share on other sites More sharing options...
LockDown Posted December 4, 2020 Share Posted December 4, 2020 (edited) 18 minutes ago, Slice said: Same as with OC: we have to use SSDT-PMC https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/AcpiSamples/SSDT-PMC.dsl Agree. My Z390 works better with SSDT-PMC than Emuvariable. I said better coz i randomly experiencing bad shutdown with Emu. BTW @Slice Do you know what is minimum requirement for SSDT-PMC as far as cpu/board is concern? Edited December 4, 2020 by ellaosx Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746230 Share on other sites More sharing options...
Matgen84 Posted December 4, 2020 Share Posted December 4, 2020 4 minutes ago, Slice said: I don't know what else. ProvideConsoleGop=YES. All as usual. ProvideConsoleGop is activated 3 minutes ago, ellaosx said: Agree. My Z390 works better with SSDT-PMC than Emuvariable. I said better coz i randomly experiencing bad shutdown with Emu. Agree too. The Z390 need SSDT-PMC I hope this temporary solution works for a long time: maybe the ESP/EFI is corrupted, so I format via Terminal. Copy/Past the EFI Folder from USB. My Z390 can boot from the HDD. Wait and see the next time, I update Clover.... for my poor NVRAM. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1009/#findComment-2746232 Share on other sites More sharing options...
Recommended Posts