Jump to content
InsanelyMac Forum
teamkiller

[Problem]Core i3 2310M Graphics problems (Intel HD3000 0x0116)

Recommended Posts

Hi guys.

First sorry for my bad english.

 

I Have a Medion Akoya E7220 Laptop

 

I have Problems with the Graphics card of my cpu

 

If I have the HD 3000 Activate, I get a wrong image signal

MacOS, indicates to me that the monitor resolution is 1600x900x32.

The monitor shows only a half picture and the machine slows down.

 

The Dev ID form My HD 3000 is 0x0116 my Cpu is a Sandy Bridge Core i3 2310M (2x 2100MHz with HT)

 

 

The Mainboard Chipset is Intel series 6/C200

 

 

The monitor Edid is:

 

 

 

 

Time: 01:40:29
Date: Mittwoch, 11. Juli 2012
EDID Manager Version: 1.0.0.14
___________________________________________________________________
Block 0 (EDID Base Block), Bytes 0 - 127, 128 BYTES OF EDID CODE:0 1 2 3 4 5 6 7 8 9
000 | 00 FF FF FF FF FF FF 00 06 AF
010 | 9E 12 00 00 00 00 01 13 01 03
020 | 80 26 15 78 0A C4 95 9E 57 53
030 | 92 26 0F 50 54 00 00 00 01 01
040 | 01 01 01 01 01 01 01 01 01 01
050 | 01 01 01 01 F8 2A 40 90 61 84
060 | 0C 30 30 20 36 00 7E D6 10 00
070 | 00 18 00 00 00 0F 00 00 00 00
080 | 00 00 00 00 00 00 00 00 00 20
090 | 00 00 00 FE 00 41 55 4F 0A 20
100 | 20 20 20 20 20 20 20 20 00 00
110 | 00 FE 00 42 31 37 33 52 57 30
120 | 31 20 56 32 20 0A 00 28
(8-9) ID Manufacture Name : AUO
(10-11) ID Product Code : 129E
(12-15) ID Serial Number : 0
(16) Week of Manufacture : 1
(17) Year of Manufacture : 2009(18) EDID Version Number : 1
(19) EDID Revision Number: 3
(20) Video Input Definition : Digital
(21) Maximum Horizontal Image Size: 38 cm
(22) Maximum Vertical Image Size : 21 cm
(23) Display Gamma : 2,20
(24) Power Management and Supported Feature(s):
RGB Color, Non-sRGB, Preferred Timing Mode(25-34) Color Characteristics
Red Chromaticity : Rx = 0,620 Ry = 0,336
Green Chromaticity : Gx = 0,321 Gy = 0,570
Blue Chromaticity : Bx = 0,150 By = 0,056
Default White Point: Wx = 0,313 Wy = 0,329
(35) Established Timings I (Not Used)(36) Established Timings II (Not Used)
(37) Manufacturer's Timings (Not Used)(38-53) Standard Timings (Not Used)
(54-71) Detailed Descriptor #1: Preferred Detailed Timing (1600x900 @ 60Hz)Pixel Clock : 110 MHz
Horizontal Image Size : 382 mm
Vertical Image Size : 214 mm
Refresh Mode : Non-interlaced
Normal Display, No Stereo
Horizontal:
Active Time : 1600 Pixels
Blanking Time : 400 Pixels
Sync Offset : 48 Pixels
Sync Pulse Width: 32 Pixels
Border : 0 Pixels
Frequency : 55 kHzVertical:
Active Time : 900 Lines
Blanking Time : 12 Lines
Sync Offset : 3 Lines
Sync Pulse Width: 6 Lines
Border : 0 Lines
Digital Separate, Horizontal Polarity (-), Vertical Polarity (-)Modeline: "1600x900" 110,000 1600 1648 1680 2000 900 903 909 912 -hsync -vsync
(72-89) Detailed Descriptor #2: Defined by Manufacturer(90-107) Detailed Descriptor #3: ASCII String Data
ASCII String Descriptor: AUO(108-125) Detailed Descriptor #4: ASCII String Data
ASCII String Descriptor: B173RW01 V2(126-127) Extension Flag and Checksum
Extension Block(s) : 0
Checksum Value : 40___________________________________________________________________
System Information Summary:Processor : Intel® Core™ i3-2310M CPU @ 2.10GHz
Operating System : Microsoft Windows 7 Home Premium
OS Version : 6.1.7601
Service Pack : 1.0
Video Controler:Device ID : VideoController1
Name : Intel® HD Graphics Family
Adapter Compatibility: Intel Corporation
Video Processor : Intel® HD Graphics Family
Video RAM : 1,77 GB (1,899,558,912 Bytes)
Availability : Running or Full Power
Driver Version : 8.15.10.2509
PNP Device ID : PCI\VEN_8086&DEV_0116&SUBSYS_20801B0A&REV_09\3&11583659&0&10
Resolution : 1600x900
Max Refresh Rate : 60 Hz
Min Refresh Rate : 60 Hz
Current Refresh Rate : 60 Hz
Current Scan Mode : None-Interlaced
Status : OK

___________________________________________________________________

 

 

 

 

how can i fix the Graphics

 

P.s.

my Kernelflags are:GraphicsEnabler=No -f and i use the Chimera 1.10 bootloader

 

THX Teamkiller

Share this post


Link to post
Share on other sites
Advertisement

If you use a HD 3000 its recommended u run OSX 10.7 Lion or 10.8 Mountain Lion. DO TAKE NOTE THAT A MACBOOKPRO8,1 SMBIOS HAS TO BE USED. If not you'll just get a blank screen, or "SNB framebuffer did not show up unload" in verbose (-v) mode. Do not try the SMBIOS of another Mac that has HD3000 cos those dun work.

 

1. What is your correct resolution?

2. What version of OSX are you using?

Share this post


Link to post
Share on other sites

hi guys,

I'm trying since two weeks now to get my graphics working.

It's a Intel HD 3000 Mobile which comes with my cpu i3-2310M.

After Installation i booted up in single user mode and moved all "AppleIntel*" kext's from /S/L/E to /S/L/E/IntelBack.

Now i was able to boot up. but only in 1024x768. Then i tried to get some kexts.

But no one of the kexts worked for me. Got everytime the same error : Stuck at Apple Boot Logo and Activity indicator freezes. what do i have to do to get this working ? I'm using iATKOS l2 with chimera 1.6 and GraphicsEnabler=Yes.

i'm using the same Laptop a Akoya E7220

it's native resolution is 1600x900.

 

Lectrasxt16

Share this post


Link to post
Share on other sites

Excatly the same problem in my Toshiba P770 ! HM65 chipset / i7 / Hd3000 !

 

Resolution 1600x900 but the screen is very buggy like que LCD kext ! test with smbios 8.1 / 8.2 and / 8.3!

Share this post


Link to post
Share on other sites

Hello Teamkiller,

 

the Same problem here with my internal display.

 

Medion Akoya P7812 Laptop under 10.8.2.

 

The problem : no EDID by default. forcing Edid with Switchres X can give the right display only if i boot in the safe mode with no kext loaded.

 

when booted normally, my internal display show the left half of display with the correct resolution. The colors are very bad.

 

External display ( testes with 3 different monitors) work perfectly.

 

So, it's not a graphic card problem, but screen problem (AUO). if you change the screen, the problem is solved. maybe this AUO category is blacklisted from apple!

 

Maybe we find our hero here in this forum :-)

Share this post


Link to post
Share on other sites

You guys need a duallink dsdt fix for this in your dsdt i will upload my dsdt if you would like to show an example, graphics still are a bit glitchy and you need to remove the appleintelcarpri kext and edit the snb kext i can upload if you would like

 

 

Hello Teamkiller,

 

the Same problem here with my internal display.

 

Medion Akoya P7812 Laptop under 10.8.2.

 

The problem : no EDID by default. forcing Edid with Switchres X can give the right display only if i boot in the safe mode with no kext loaded.

 

when booted normally, my internal display show the left half of display with the correct resolution. The colors are very bad.

 

External display ( testes with 3 different monitors) work perfectly.

 

So, it's not a graphic card problem, but screen problem (AUO). if you change the screen, the problem is solved. maybe this AUO category is blacklisted from apple!

 

Maybe we find our hero here in this forum :-)

Share this post


Link to post
Share on other sites

Hello,

 

Thank you for the replay. I tried different method with some advance. But no perfect solutions.

 

Some changed on my hardware are make:

 

- Screen changed to LG philips Full HD: screen goes black after system starts

 

- CPU changed to I7: screen black, half left screen with the old one.

 

- Trying with DSDT from another laptop with the same configuration : Dell XPS 173x , the display is correct but my battery meter not working with original kexts and with all patched kexts found on the internet.

 

with my riginal DSDT, screen black, but all works with external HDMI display.

i think i need a dsdt modification but no way, i'm unable to get it working.

 

any idea?

 

Thank you.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By bojarek8
      Hi! 
       
      I'm Kris!  I hope my topic is in a good section.
      I am asking you guys for help in this difficult hackintosh problem. 
      For a very long time I tried to solve it myself but I have no idea how I can solve this problem.
       
       
      Description of the problem
       
       
      My problem is that I do not have access to any apple service. I am unable to log into the App Store using my Apple ID. I am unable to log into iCloud account in system preferences. iMessage and Facetime also do not work.  Messages that I get when I try to log in: "An error occurred during activation. Try again" 
       
      in iMessage: "An error occurred during activation. Try again" 
      in App Store: "This device or computer can not be verified. Contact the support department for help"
      in Face Time: "There was an error during activation. Try again"
       
      In summary, I am unable to log in to any apple network service. 
       
      My Specification 
       
      Motherboard:  Acer MG43M
       
      Processor: Intel(R) Core(TM)2 Duo CPU  E7600  3.06GHz
       
      Graphic card: Gigabyte GeForce 9600GT 515MB 
       
      Wi-fi: TP-LINK  TL-WN881ND
       
      Ethernet: (not supported) 
       
      Audio: (rather, it is not needed here)
       
      Files: 
       
      My config.plist: https://drive.google.com/drive/folders/1vlYJC329sz6yuTwFr-k0fOs3rfhKeI6l
       
       
       
       
       



    • By ammoune78
      Hey, i have problem of Freezes and Glitches with Intel HD 4400 in High Sierra 10.13.4. I have i5-4300U with the following edits:
       
      OperationRegion (GFXH, PCI_Config, Zero, 0x40) Field (GFXH, ByteAcc, NoLock, Preserve) { VID0, 16, DID0, 16 } Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { If (LEqual (Arg0, Buffer (0x10) { /* 0000 */ 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44, /* 0008 */ 0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B })) { If (LNotEqual (And (VID0, 0xFFFF), 0xFFFF)) { Store (Package (0x0E) { "AAPL,slot-name", "Built In", "name", "Intel Graphics Controller", "model", Buffer (0x0E) { "Intel HD 4400" }, "device_type", Buffer (0x14) { "Graphics Controller" }, "compatible", Buffer (0x0C) { "pci8086,412" }, "AAPL,ig-platform-id", Buffer (0x04) { 0x06, 0x00, 0x26, 0x0A }, "hda-gfx", Buffer (0x0A) { "onboard-1" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Return (0x80000002) } And using "0x04128086" as FakeID, injecting Intel enabled and using the "0x0A260006" in Clover config.plist.
      Please any suggestion to solve this issue?
      Thanks!
    • By grumpycat1984
      I am doing it under Sierra via VM and system refuses to do this (install to apps), also there is no ption to "buy" El Capitan from store.
       
      If someone give me advice how to make it run I will be very glad.
    • By iammodus
      Hello there,
      a while back I tested El Capitan on an old computer, and had a pleasant first impression. So, I decided to take a spare hard drive and install EC using Clover on my main PC.
       
      The installation went fine, no problem. [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] ran fine, installed all kexts OK.
      I still don't have the Wi-Fi kext (TL-WN722N), apparently someone did one but I have to build it myself. I'll get to that on another moment.
       
      Now, the main issue I'm having is getting both displays to work. Unfortunately, both displays turn out to have only VGA input.
       
      So, I have an i7-4790, with Intel HD4600 integrated graphics, plus a discrete Gigabyte GTX 650. Because the discrete card only has one VGA out, I need to enable the iGPU too in order to be able to use the second port. On Windows, this works fine. Both displays get along without issues.
       
      OS X is a different story though. Only the GTX 650 works. It has full hardware acceleration so that's no longer an issue.
      I'm trying to get the integrated graphics to work at the same time, so I can have both displays operative just like Windows.
       
      Things I've tried:
       
      - FakePCIID
      - IGPlatformID
      - Taking out the discrete GPU. It hangs at boot. Only works in safe mode, but of course that's no use.
      - Setting iGPU as Primary, and here's where things get really weird. The computer boots (Apple logo with loading bar) on the HD4600's monitor, but then this display freezes and the login screen appears on the 650's screen. I attached a screenshot in which I try it with verbose mode, but mind you a normal boot is no different. It really seems like the OS just wants the NVIDIA GPU as primary regardless of my Clover settings.
       
      So, any ideas on how to get this working?

    • By giacomo.dessi2303
      Buongiorno a tutti sono un nuovo utente del forum e avrei bisogno di aiuto. Ho installato sierra sul mio laptop che ha le seguenti caratteristiche:
      Scheda video: intel hd graphics 3000 + NVIDIA GeForce GT 720M (so già che la scheda Nvidia non funzionerà)
      Scheda audio: Intel High Definition Audio
      Scheda di rete: 802.11b/g/n
       
      Questo è ciò che funziona e ciò che non funziona:
      Audio (OK)
      WebCam (OK)
      Ethernet (OK)
      Graphics (OK)
      Touchpad (OK)
      Keyboard (OK)
      WiFi (OK)
      USB (OK)
      Bootloader (OK)
      Battery (NO)
      Microphone (NO)
      Brightness (NO)
      Bluetooth (NO)
      SD Card Reader (NO)
       
      ​Non è che qualcuno di voi riuscirebbe a sistemarmi il DSDT in modo che il  portatile funzioni correttamente con sierra? Grazie in anticipo
       
      CLOVER + DSDT.zip
×