TomA2 Posted September 19, 2006 Share Posted September 19, 2006 I am looking at the processor temps in the BIOS hardware monitoring. Processor fan speed is 2700 Rear fan speed is 2100 I have Pentium D 840 and my temps are: Processor Temp: 83C Internal Temp: 51C Remote Temp: 43C This seems too high. What's up? Link to comment Share on other sites More sharing options...
TopazBar Posted September 19, 2006 Share Posted September 19, 2006 That seems wrong. Here is mine for reference. Pentium D 805, Processor Temp: 47-48 C Fan speed: 1800 Mobo Temp: low 40'ish Link to comment Share on other sites More sharing options...
TomA2 Posted September 19, 2006 Author Share Posted September 19, 2006 What are you using? I am looking at "Hardware Monitoring" in the BIOS I'm not really sure what the difference between processor temp and internal temp is, either. Link to comment Share on other sites More sharing options...
TopazBar Posted September 19, 2006 Share Posted September 19, 2006 Both BIOS and double checked with fanspeed (?sp). EDIT: more details. I use OSX all day then I go into BIOS and check processor and mobo temp. I use windows all day (similar functions in OSX) then monitored temp using fanspeed. Link to comment Share on other sites More sharing options...
TomA2 Posted September 19, 2006 Author Share Posted September 19, 2006 Your BIOS only reports 2 temps? Mine reports three. I wonder which ones are equivalent? The 80s one seems too high, but I don't know what it means. Link to comment Share on other sites More sharing options...
mifki Posted September 19, 2006 Share Posted September 19, 2006 Dont trust the onboard sensor, they dont work sometimes. Try applying a new coating of goop (thermal paste) to your heatsink and make sure its really thin or it will not conduct heat well. That is all i can say Dont trust the onboard sensor, they dont work sometimes. Try applying a new coating of goop (thermal paste) to your heatsink and make sure its really thin or it will not conduct heat well. That is all i can say Link to comment Share on other sites More sharing options...
MacMartin Posted September 19, 2006 Share Posted September 19, 2006 Is your CPU stable? No error's or BSOD's? Try a program like Prime'95 and run it for at least 6 hours. If it's errorfree, then the sensor doesn't work. I know my D805 isn't stable at 83C. I tested it by overclocking it to 4.1GHz. Link to comment Share on other sites More sharing options...
TomA2 Posted September 20, 2006 Author Share Posted September 20, 2006 It seems to be fine. I haven't noticed any problems with it. When I leave the case open the temp drops to 78C, but when it is closed it heads up to 85C. I wonder whether the processor fan is down all the way, because this MOBO has a number of resistors around the processor socket that make contact with the base of the fan. I'm thinking of taking the fan out and grinding down the edges on my grinder. Link to comment Share on other sites More sharing options...
zedzed Posted September 20, 2006 Share Posted September 20, 2006 What CPU fan are you using? I have a Hot P4 550 series. I have CNPS9500 AT Which keeps my HOT CPU nice and cool below 60 C Link to comment Share on other sites More sharing options...
TomA2 Posted September 20, 2006 Author Share Posted September 20, 2006 I'm using: Masscool 8W0141B Socket 775 CPU Cooling Fan 3.6GHz Link to comment Share on other sites More sharing options...
Recommended Posts