Jump to content

Help me to find drivers for my VGA: Ati X850 XTPE (Platinum Edition) AGP!

graphic Design
 Share
26 posts in this topic

Recommended Posts

graphic Design
graphic Design
Posted
Posted

My Card:

Ati X850 XTPE (Platinum Edition) 256MB

AGP 8X

My mainboard: IK1100

My OS: MAC OSX Jas 10.4.6

How can I get the best way to fix driver for my VGA?

My Card's information appear in MAC like this: (After fixed Resolusion in com.apple.Boot.plist)

 

Type:	VGA-Compatible Controller
 Bus:	PCI
 VRAM (Total):	128 MB
 Vendor:	ATI (0x1002)
 Device ID:	0x4b4c
 Revision ID:	0x0000
 Kernel Extension Info:	No Kext Loaded
 Displays:
Display:
 Resolution:	1280 x 1024
 Depth:	32-bit Color
 Core Image:	Not Supported
 Main Display:	Yes
 Mirror:	Off
 Online:	Yes
 Quartz Extreme:	Not Supported

 

I'd like to have the best driver for my card, please help me because I dont know extractly which ways make sure 100% support and well-doing with my card

Anyones who have the experience, what are U waiting for?

Thank you very much! :blink:

 

(I fixed my resolution to 1280x1024x32 but my refresh rate still: 60HZ, when I add "@85" to <string>1280x1024x32@85<string> to the "com.apple.Boot.plist" file, my MAC OS can't boot any more!

So now I need another ways to do this, also!)

Link to comment
Share on other sites
asapreta
asapreta
Posted
Posted

Guedes Jr,

 

Vou tentar esse aí pq a minha x800GTO nova não aceita mais QE & CI de jeito nenhum, a anterior (deu problema) funcionava muito bem e ambas eram mesma marca e modelo.

 

I´ll try this one because my new x800GTO is not enabling QE & CI anymore. The old one (need to be exchanged due to a problem) worked prety fine. Both were same model and brand.

 

 

EDIT> tried the hint (demon + ati_work) but was unable to find any torrents...

Link to comment
Share on other sites
ROXR
ROXR
Posted
Posted 
Type:	VGA-Compatible Controller
 Bus:	PCI
 VRAM (Total):	128 MB
 Vendor:	ATI (0x1002)
 Device ID:	0x4b4c
 Revision ID:	0x0000
 Kernel Extension Info:	No Kext Loaded
 Displays:
Display:
 Resolution:	1280 x 1024
 Depth:	32-bit Color
 Core Image:	Not Supported
 Main Display:	Yes
 Mirror:	Off
 Online:	Yes
 Quartz Extreme:	Not Supported

 

I'd like to have the best driver for my card, please help me because I dont know extractly which ways make sure 100% support and well-doing with my card

Anyones who have the experience, what are U waiting for?

Thank you very much! :(

 

(I fixed my resolution to 1280x1024x32 but my refresh rate still: 60HZ, when I add "@85" to <string>1280x1024x32@85<string> to the "com.apple.Boot.plist" file, my MAC OS can't boot any more!

So now I need another ways to do this, also!)

 

The best driver for your card is ATI9700.kext, but device ID 0x4b4c is not into ATIRADEON9700.kext

 

... you must edit atiradeon9700.kext/contents/info.plist and add to the code 0x4b4c1002 along with the rest of references. With this simply edition must work Core image and quartz extreme, with pretty mouse tearing, je je.

 

With Callisto drivers you lost CI & QE but win change resolutions

Link to comment
Share on other sites
ROXR
ROXR
Posted
Posted

......... the easy thing is to go to applications/tools/netinfo, and in menu security to activate user root with password. To leave netinfo, to do logout and to enter like root. soon in /system/library/extensions to look for AtiRadeon9700.kext and with the right button of the mouse to select to show package contents, to open contents and to edit info.plist with textedit, to add 0x4b4c1002 between the rest of codes and to save. Soon to open terminal and to write

 

rm /system/library/extensions.kextcache

kextcache - k /system/library/extensons

 

exit and restart

 

another way to do it is to stop the starting during timeout and to write

 

- s

 

we will enter superuser mode

to write:

 

/sbin/mount - uw/

 

CD /system/library/extensions/atiradeon9700.kext/contents

 

emacs info.plist

 

edit the code 0x4b4c1002 and to press ctrl+x ctrl+c

 

kextcache - k /system/library/extensions

 

exit

Link to comment
Share on other sites
graphic Design
graphic Design
Posted
  • Author
Posted

Thanks ROXR again!

But my problem is: I dont know where to add the code 0x4b4c1002!

Example my code in the info.plist of AtiRadeon9700.kext like this:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleExecutable</key>
<string>ATIRadeon9700</string>
<key>CFBundleGetInfoString</key>
<string>ATIRadeon9700 1.4.26.11 (3493)</string>
<key>CFBundleIdentifier</key>
<string>com.apple.ATIRadeon9700</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>ATI Radeon 9700 Kernel Extension</string>
<key>CFBundlePackageType</key>
<string>KEXT</string>
<key>CFBundleShortVersionString</key>
<string>1.4.26</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>4.2.6</string>
<key>IOKitPersonalities</key>
<dict>
	<key>ATIRadeon9700</key>
	<dict>
		<key>ATIEnableWideBlitSupport</key>
		<true/>
		<key>ATIUseTearingWideBlit</key>
		<false/>
		<key>CFBundleIdentifier</key>
		<string>com.apple.ATIRadeon9700</string>
		<key>IOCFPlugInTypes</key>
		<dict>
			<key>ACCF0000-0000-0000-0000-000a2789904e</key>
			<string>ATIRadeon9700GA.plugin</string>
		</dict>
		<key>IOClass</key>
		<string>ATIRadeon9700</string>
		<key>IODVDBundleName</key>
		<string>ATIRadeon9700VADriver</string>
		<key>IOMatchCategory</key>
		<string>IOAccelerator</string>
		<key>IOPCIMatch</key>
		<string>0x4E441002 0x41441002 0x4E481002 0x41481002 0x41501002 0x4E501002 0x41521002 0x4E541002 0x4A481002 0x4A491002 0x4A4A1002 0x4A4B1002 0x4A4C1002 0x4A4D1002 0x4A4E1002 0x5B601002 0x5B621002 0x3E501002 0x4E561002 0x5B641002 0x3E541002</string>
		<key>IOProviderClass</key>
		<string>IOPCIDevice</string>
		<key>IOSourceVersion</key>
		<string>1.4.26.11</string>
	</dict>
</dict>
<key>OSBundleLibraries</key>
<dict>
	<key>com.apple.iokit.IOGraphicsFamily</key>
	<string>1.0.0b1</string>
	<key>com.apple.iokit.IONDRVSupport</key>
	<string>1.0.0b1</string>
	<key>com.apple.iokit.IOPCIFamily</key>
	<string>1.0.0b1</string>
	<key>com.apple.kernel.iokit</key>
	<string>1.0.0b1</string>
</dict>
</dict>
</plist>

 

So, When I add the code 0x4b4c1002, what will it look like?

Sorry about my stupid...

Link to comment
Share on other sites
Rammjet
Rammjet
Posted
Posted
But my problem is: I dont know where to add the code 0x4b4c1002!

Example my code in the info.plist of AtiRadeon9700.kext like this:

			<string>ATIRadeon9700VADriver</string>
		<key>IOMatchCategory</key>
		<string>IOAccelerator</string>
		<key>IOPCIMatch</key>
		<string>0x4E441002 0x41441002 0x4E481002 0x41481002 0x41501002 0x4E501002 0x41521002 0x4E541002 0x4A481002 0x4A491002 0x4A4A1002 0x4A4B1002 0x4A4C1002 0x4A4D1002 0x4A4E1002 0x5B601002 0x5B621002 0x3E501002 0x4E561002 0x5B641002 0x3E541002</string>
		<key>IOProviderClass</key>

 

So, When I add the code 0x4b4c1002, what will it look like?

 

I suppose you can't see all of these "codes" that look just like yours and even end in "1002"?

Link to comment
Share on other sites
graphic Design
graphic Design
Posted
  • Author
Posted

After I add my VGA code and restart, Mac displayed the erros with my AtiRadeon9700.kext

I add like this:

 

<key>IOPCIMatch</key>

<string>0x4E441002 0x41441002 0x4E481002 0x41481002 0x41501002 0x4E501002 0x41521002 0x4E541002 0x4A481002 0x4A491002 0x4A4A1002 0x4A4B1002 0x4A4C1002 0x4A4D1002 0x4A4E1002 0x5B601002 0x5B621002 0x3E501002 0x4E561002 0x5B641002 0x3E541002 0x4b4c1002</string>

I did somethings wrong?

Link to comment
Share on other sites
graphic Design
graphic Design
Posted
  • Author
Posted

Okie, now, I used Callisto 008 and have the better informations:

 

Radeon X850 XT (AGP):

 Chipset Model:	Radeon X850 XT (AGP)
 Type:	Display
 Bus:	PCI
 VRAM (Total):	256 MB
 Vendor:	ATI (0x1002)
 Device ID:	0x4b4c
 Revision ID:	0x0000
 Displays:
Display:
 Resolution:	1280 x 1024 @ 75 Hz
 Depth:	32-bit Color
 Core Image:	Not Supported
 Main Display:	Yes
 Mirror:	Off
 Online:	Yes
 Quartz Extreme:	Not Supported

 

But my Core Image and Quartz Extreme are still Not Supported like before!

How can I fix this problem?

Thank you for all reply!

Link to comment
Share on other sites
Rammjet
Rammjet
Posted
Posted

If you read the FAQ that was included with your Callisto package, it says the following:

 

Q. How do I get the QE/CI/OpenGL KEXTs to work with Callisto?

 

A. Look in your /System/Library/Extensions folder for ATIRadeonXXXXGA.plugin/ (XXXX depends on your card model). Edit its Info.plist, under IOProviderClass key change IONDRVFramebuffer to CallistoFB, update or delete Extensions.mkext and Extensions.kextcache, then reboot.

Link to comment
Share on other sites
graphic Design
graphic Design
Posted
  • Author
Posted
Q. How do I get the QE/CI/OpenGL KEXTs to work with Callisto?

 

A. Look in your /System/Library/Extensions folder for ATIRadeonXXXXGA.plugin/ (XXXX depends on your card model). Edit its Info.plist, under IOProviderClass key change IONDRVFramebuffer to CallistoFB, update or delete Extensions.mkext and Extensions.kextcache, then reboot.

 

I followed, but nothing change!

my system still like this:

 

Radeon X850 XT (AGP):

 Chipset Model:	Radeon X850 XT (AGP)
 Type:	Display
 Bus:	PCI
 VRAM (Total):	256 MB
 Vendor:	ATI (0x1002)
 Device ID:	0x4b4c
 Revision ID:	0x0000
 Displays:
Display:
 Resolution:	1280 x 1024 @ 75 Hz
 Depth:	32-bit Color
 Core Image:	Not Supported
 Main Display:	Yes
 Mirror:	Off
 Online:	Yes
 Quartz Extreme:	Not Supported

 

Any idea, please?

Link to comment
Share on other sites
krzysiek___k
krzysiek___k
Posted
Posted

Hi,

I have good news for you.

Your search is over for some time (or for ever).

 

There is no way to run AGP version of x850 on MAC OS X.

 

I was fighting with that sh..t but after month of checking, changing, reinstallation and so on decided to believe that it wont work.

 

 

HOWEVER - if you will do something better than me - please let me know.

Link to comment
Share on other sites
graphic Design
graphic Design
Posted
  • Author
Posted
Hi,

I have good news for you.

Your search is over for some time (or for ever).

 

There is no way to run AGP version of x850 on MAC OS X.

 

I was fighting with that sh..t but after month of checking, changing, reinstallation and so on decided to believe that it wont work.

 

 

HOWEVER - if you will do something better than me - please let me know.

 

Hix, I thing it's bad new!!!

I tried to follow almost ways that everybody show me but no way success!

Now System Information can display nearly extractly my VGA infomation (It appear X850 XT while my card is X850 XTPE) and that all, no Core Image and Quartz Extreme ! Without Core Image and Quartz Extreme, I cant see the DVD movie!!!

Somebody help me!

@krzysiek___k:

We can share infomation together, okie?

Link to comment
Share on other sites
graphic Design
graphic Design
Posted
  • Author
Posted
Use search..hint: Callisto and Koverg

 

Finally... Everything is okie:

 

Radeon X850 XT (AGP):

 Chipset Model:	Radeon X850 XT (AGP)
 Type:	Display
 Bus:	PCI
 VRAM (Total):	256 MB
 Vendor:	ATI (0x1002)
 Device ID:	0x4b4c
 Revision ID:	0x0000
 Displays:
Display:
 Resolution:	1280 x 1024 @ 75 Hz
 Depth:	32-bit Color
 Core Image:	Supported
 Main Display:	Yes
 Mirror:	Off
 Online:	Yes
 Quartz 2D Extreme:	Supported
 Quartz Extreme:	Supported

 

So happy!

Callisto + Koverg Patch + QuartzSimple ==> Perfect

Thanks DaxTsurugi for the helpful Suggest!!!!

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...