NeOxXx85 Posted February 15, 2010 Share Posted February 15, 2010 Requirements: - Original Image Snow Leopard build 10A432 - Pre installed Mac OSX for create a USB boot installation - USB Flash driver or external HardDisk (min 8gb) - Pack NB200 installer - Snow Leopard Combo Update 10.6.2 Prepare USB boot driver: [1] With “Disk Utility” Format and partition your USB flash driver or external harddisk as Mac OSX (Journaled), important don't forget to set it as MBR, not GUID. [2] Restore Snow Leopard build 10A432 .dmg file to the flash driver and wait done process. [3] After finishing the restore, run myHack Installer to prepare USB installer device for booting: 1. Change Install Location & point it to your USB device. 2. Click Customize & leave everything as it except also select ApplePS2Controller. [4] On USB device browse to and delete IOATAFamily.kext from /System/Library/Extensions, and if necessary also AppleIntelCPUPowerManagement.kext, to avoid the kernel panic at boot. (To delete this file you must first show hidden files in OSX; you can use this terminal command to do this: “defaults write com.apple.finder AppleShowAllFiles TRUE”, and “killall Finder”, for turn off hidden files change with FALSE). Install Snow Leopard: [1] Before installing, boot your toshiba, enter into the bios by hitting F2, make sure your Legacy USB is in enabled, and Sata Controller in AHCI. [2] Restart NB200 with the Flash Drive on USB, hit F12 to choose the drive to boot, select your flash drive and wait, if don't boot try again. [3] With Disk Utility format and partition (if you want) your HD, (partition as GUID this time, Mac OSX Journaled) [4] Before start the installation, be sure to customize it and REMOVE the printer support and other languages, you can keep the fonts and X11, and take QuickTime. [5] Start the installation and wait until 7 minutes from the end, don't worry, now you need to restart. [6] Boot from USB and choose new installed partition from bootloader, (if you have a kernel panic error you need to erase /System/Library/Extensions/IOATAFamily.kext and if necessary also AppleIntelCPUPowerManagement.kext from your new partition installed. For erase this file you run again the Snow Leoapard installer from boot USB and go to Terminal end enter this command: “rm -r /Volumes/(Name of your harddrive)/System/Library/Extensions/IOATAFamily.kext”). [7] Complete the first access questions to SnowLeopard and enter it, now run again myHack Installer, but this time install it into SnowLeopard partition, and customizing it: disabling com.apple.Boot.plist, GraphicsEnabler and enable ApplePS2Controller. Completed installation but don't reboot. Now copy the content of Extra folder from “Pack NB200 Installer” to your Extra folder. [8] Reboot and copy patch27ae.command from “Pack NB200 Installer” to your root and go to Terminal, enter this command “sudo /patch27ae.command” for patch VGA driver. Reboot. [9] Now run ComboUpdate 10.6.2 and install it. Before restarting run Terminal and enter this command “sudo rm /mach_kernel”, now copy the patched mach_kernel from “Pack NB200 Installer” to your root, run Terminal again and enter “sudo /pfix” for repair your permissions.Reboot. [10] Run Terminal and enter “sudo /patch27ae.command” again.Reboot. [11] Now copy VoodooPS2Controller.kext from “Pack NB200 Installer/kext” to your Extra/Extensions folder and delete them ApplePS2Controller.kext. Install all different .kext (also VoodooPS2Controller.kext) from “Pack NB200 Installer/kext” in your system with Kext Helper b7. Now delete /System/Library/PreferencePanes/Trackpad.prefPane and replace it with “Pack NB200 Installer/Trackpad.prefPane”. Now go to Terminal and enter “sudo /pfix” for repair the permissions.Reboot. [12] Install CamTwist-2.1.dmg from “Pack NB200 Installer”. [13] Patch the Unknown CPU type in About This Mac copying English.lpropj or Italian.lpropj (for Italians :9) from “Pack NB200 Installer/System/Library/CoreServices/Resources/” to /System/Library/CoreServices/Resources/ (Hidden Folder). Reboot. [14] FINISH !! PS: I replaced the Atheros AR9285 WIFI with AR5BXB61 natively recognized by Snow Leopard. Sleep work in progress.. Link to comment Share on other sites More sharing options...
astrological Posted February 17, 2010 Share Posted February 17, 2010 So you had to change your Wireless Chipset to get WiFi working? Any problems until now? Everything working flawless? What about dual booting, is it possible? Thanks and great work :-) Link to comment Share on other sites More sharing options...
NeOxXx85 Posted February 17, 2010 Author Share Posted February 17, 2010 I changed the AR9285 mini pci wifi with the AR5BXB61 and everything works perfectly, as you can see from the screenshots, I also downloaded the iphone sdk 2,82 GB without problems and are about 2 weeks I use snow leopard without problems. All this guide and the answer I'm doing this from Snow Leopard 10.6.2 on NB200. About dual boot, first partition the hard disk with DiskUtility, then install Windows and then install Snow Leopard with my guide. To fix the problem of displacement of the time between Windows and Snow Leopard, saves the contents below into a file .reg and add it to the registry of Windows. So 'no problems with the time between Windows and Snow Leopard. Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] "RealTimeIsUniversal"=dword:00000001 I am working to fix the sleep now... Link to comment Share on other sites More sharing options...
cRuNcHiE Posted February 17, 2010 Share Posted February 17, 2010 Which version of the NB200 is this for? There is the NB200-11H or NB200-11L im guessing its the 11H as it says N280? cheers! Link to comment Share on other sites More sharing options...
NeOxXx85 Posted February 17, 2010 Author Share Posted February 17, 2010 I tested this on my NB200-10Z (Atom N280), but I have not added any DSDT, so I go on other versions of the NB200. I'm trying to fix DSDT for Sleep. Link to comment Share on other sites More sharing options...
M4K10 Posted February 18, 2010 Share Posted February 18, 2010 So basically all you did was copy noxin's guide and add in word for word all of the steps I personally figured out. Then you claim that you figured it all out? If anyone is wondering how to get sleep working, just search nb205 snow leopard and find the original guide. Everything in that thread is working perfectly. Link to comment Share on other sites More sharing options...
NeOxXx85 Posted February 18, 2010 Author Share Posted February 18, 2010 I honestly do not know who is noxin, here I just wrote my experience after having tried in vain other guides, not working on my NB200. Especially there is no compatibility with the DSDT of the NB205. My friend here speaks of the NB200, not NB205. I just hope I have helped someone, certainly not here to make racing journalism. Thanks. Link to comment Share on other sites More sharing options...
DivEorDiE Posted February 20, 2010 Share Posted February 20, 2010 great job my friend can you make and a video guide with exactly step by step what we must do for us who we are begginers? please???????? Link to comment Share on other sites More sharing options...
pbatini Posted February 20, 2010 Share Posted February 20, 2010 I honestly do not know who is noxin, here I just wrote my experience after having tried in vain other guides, not working on my NB200. Especially there is no compatibility with the DSDT of the NB205.My friend here speaks of the NB200, not NB205. I just hope I have helped someone, certainly not here to make racing journalism. Thanks. thanks for your guide. i allready made an installation using the dell mini 10v guide http://osx86sv.wordpress.com/2009/12/31/os...n-dell-mini10v/ all worked well but - bluetooth - audio i/o - trackpad gestures, scrolling and click di you confirm yhat with your guide and package all works fine? any tricks? grazie mille piero Link to comment Share on other sites More sharing options...
NeOxXx85 Posted February 21, 2010 Author Share Posted February 21, 2010 pbatini, you have a PM! great job my friend can you make and a video guide with exactly step by step what we must do for us who we are begginers? please???????? :rolleyes: I do not know if I have time to make a video guide, if you follow the steps above, you should succeed. Anyway thanks for the idea. Link to comment Share on other sites More sharing options...
pbatini Posted February 21, 2010 Share Posted February 21, 2010 pbatini, you have a PM! I do not know if I have time to make a video guide, if you follow the steps above, you should succeed. Anyway thanks for the idea. yes, i tried installing snow leopard following the dell guide. almost all woks fine, eccept bluetoot (not recognized), audio i/o (think it's easy to fix), trackpad click, gestures, scrolling. had to swap wifi to a dell card (ebay). i will try to install with your guide in the next days and i let you know. many thanks again piero Link to comment Share on other sites More sharing options...
pbatini Posted February 21, 2010 Share Posted February 21, 2010 pbatini, you have a PM! I do not know if I have time to make a video guide, if you follow the steps above, you should succeed. Anyway thanks for the idea. hi neoxxxx85, looking at your screenshot i note that your battery and bluetooth icon are aout. is there a problem or simply switched of the bluetooth and pulled out the battery? saluti p Link to comment Share on other sites More sharing options...
waoo Posted February 23, 2010 Share Posted February 23, 2010 Hello all, 2 questions: what's the battery life when you're using SL? Does anyone have a copy of the recovery cd/dvd for me? I have the "HDD recovery" Folders, but cant create a restore DVD ... and I would love to have a safe copy before playing with SL etc thanks! Link to comment Share on other sites More sharing options...
godaiyusaku Posted February 26, 2010 Share Posted February 26, 2010 hi, the cam is ok with ichat? and bluetooth? Thx PS. Sei italiano? Link to comment Share on other sites More sharing options...
ZackMacAttack Posted March 4, 2010 Share Posted March 4, 2010 Thats awesome! i don't have a netbook but sill! i did not know it was posible with a netbook. verry cool! Link to comment Share on other sites More sharing options...
CorreoMail Posted March 16, 2010 Share Posted March 16, 2010 NB100, im trying to installing in a Toshiba NB100 but im still having problems with the video grafics, if i patch then in the nex reboot a recibe a gray screen, i wondering how, do you can help me?? 1 Link to comment Share on other sites More sharing options...
muniello Posted March 18, 2010 Share Posted March 18, 2010 Thanks!!!!!! it works on my Benq joybook lite U102 Link to comment Share on other sites More sharing options...
anggroup Posted March 18, 2010 Share Posted March 18, 2010 Can you upload rapidshare NB200 Pack installer? Please. Thanks in advance. Link to comment Share on other sites More sharing options...
abiffmaster Posted March 26, 2010 Share Posted March 26, 2010 Has anyone tried this and been successful with using the Snow Leopard upgrade DVD? Link to comment Share on other sites More sharing options...
Kenny Jones Posted March 30, 2010 Share Posted March 30, 2010 Has anyone tried this and been successful with using the Snow Leopard upgrade DVD? Hey there, I did and everything but the wireless and ethernet work for me. The good news is I tried the USB-Ethernet dongle a friend has for his MacBook Air and it worked!. All I need now is my 1510 card I ordered from Dell. Sleep is a bit fussy but oh well. Cheers, Link to comment Share on other sites More sharing options...
abiffmaster Posted April 1, 2010 Share Posted April 1, 2010 This is awesome stuff. I am getting kernel panics at boot from the USB install on the NB205 (I have removed the kext based on instructions). Can someone who has installed this on their NB205 successfully please point me in the right direction? Thanks Link to comment Share on other sites More sharing options...
abiffmaster Posted April 1, 2010 Share Posted April 1, 2010 I just purchased a Toshiba NB205 and I am trying to get 10.6.2 on it. I get kernel panics while launching via the USB drive... Has anyone been successful in doing this and would you mind sharing some details/links with me? Thanks Link to comment Share on other sites More sharing options...
earthiced Posted April 3, 2010 Share Posted April 3, 2010 HI, How to replaced the Atheros AR9285 WIFI with AR5BXB61? My Toshiba NB200 recognizes the card pci dell wireless 1505 )BMC 4328, but I can not make it work. And any news of the sleep mode?????? I need help please Thanks from Chile Link to comment Share on other sites More sharing options...
fds Posted April 17, 2010 Share Posted April 17, 2010 you say " I replaced the Atheros AR9285 WIFI with AR5BXB61 natively recognized by Snow Leopard. Sleep work in progress.." but it didn' work for me. also when I try to clik system utilitys, comes an error. Link to comment Share on other sites More sharing options...
fds Posted April 18, 2010 Share Posted April 18, 2010 you say " I replaced the Atheros AR9285 WIFI with AR5BXB61 natively recognized by Snow Leopard. Sleep work in progress.." but it didn' work for me. also when I try to clik system utilitys, comes an error. Can anyone Help? wireless not working. where can I find AR5BXB61 kext file ? Link to comment Share on other sites More sharing options...
Recommended Posts