qzl722 Posted October 14, 2008 Share Posted October 14, 2008 my thinkpad R61E WITH BCM5787M 14e4:1693 uses your kext, did not work, i delete other 5751kext,and use KEXT HELPER to install it ,but after install it ,i get panic ,and reboot aslo panic ,could not log into the system.?help me ?how do you install? Link to comment Share on other sites More sharing options...
magnat2 Posted October 14, 2008 Share Posted October 14, 2008 my thinkpad R61E WITH BCM5787M 14e4:1693 uses your kext, did not work, i delete other 5751kext,and use KEXT HELPER to install it ,but after install it ,i get panic ,and reboot aslo panic ,could not log into the system.?help me ?how do you install? Try booting in safe mode, with -x at darwin boot screen, and install this kext (It´s the original one, the one that you have deleted) with kext helper... Good luck! BCM57XX.kext.zip Link to comment Share on other sites More sharing options...
qzl722 Posted October 15, 2008 Share Posted October 15, 2008 I install the 5787M.kext sucessfully, and get the mac address .and get a ip (192.168.1.111 from my router),but i can not get the interenet ,why?here are the pictures.,help.me...... Link to comment Share on other sites More sharing options...
xghost Posted October 15, 2008 Share Posted October 15, 2008 kext seems to work here, but it kills sleep. Link to comment Share on other sites More sharing options...
macita Posted October 15, 2008 Share Posted October 15, 2008 DOESNT WORK IN SHARED WINDOWS DOMAIN NETWORKS!! (surf on the web is ok) I have here 2 laptops hackintosh, my toshiba and a travelmate 6410 with this Broadcom 5758M, with the toshiba i can surf the shared folder in the domain company lan, when i use the Travelmate (my official work notebook), after some folders i get kernel panic. Can u fix or check it? thnx anyway for your work very appreciated! Link to comment Share on other sites More sharing options...
nobb1x Posted October 15, 2008 Author Share Posted October 15, 2008 DOESNT WORK IN SHARED WINDOWS DOMAIN NETWORKS!! (surf on the web is ok) I have here 2 laptops hackintosh, my toshiba and a travelmate 6410 with this Broadcom 5758M, with the toshiba i can surf the shared folder in the domain company lan, when i use the Travelmate (my official work notebook), after some folders i get kernel panic. Can u fix or check it? thnx anyway for your work very appreciated! hmm, i can check but i can't test, it gave kernel panic before because of a wrong value in buffer size, maybe there is another routine still unpatched around. I install the 5787M.kext sucessfully, and get the mac address .and get a ip (192.168.1.111 from my router),but i can not get the interenet ,why?here are the pictures.,help.me...... Man, you don't get an address from your router, you set it manually, as your pics show. are you sure that address is correct?, your router hasn't a DHCP server? what happen if you let the lan card get the address automatically? try to ping your router from a terminal window, try also to type ifconfig and look if the promiscuous mode is enabled en0: flags=8863<UP,BROADCAST,SMART,PROMISC,RUNNING,SIMPLEX,MULTICAST> mtu 1500 if not enabled the lan will not work!!! if the set_promisc script fail, you can try to force promiscuous mode using the terminal command "sudo tcpdump" then open another terminal and try again the ifconfig. Link to comment Share on other sites More sharing options...
macita Posted October 16, 2008 Share Posted October 16, 2008 hmm, i can check but i can't test, it gave kernel panic before because of a wrong value in buffer size, maybe there is another routine still unpatched around. Ok nobb1x, let me know , may i can test whenim at work (heheh)... send me a msg when u find this routine.. Link to comment Share on other sites More sharing options...
qzl722 Posted October 16, 2008 Share Posted October 16, 2008 hmm, i can check but i can't test, it gave kernel panic before because of a wrong value in buffer size, maybe there is another routine still unpatched around.Man, you don't get an address from your router, you set it manually, as your pics show. are you sure that address is correct?, your router hasn't a DHCP server? what happen if you let the lan card get the address automatically? try to ping your router from a terminal window, try also to type ifconfig and look if the promiscuous mode is enabled en0: flags=8863<UP,BROADCAST,SMART,PROMISC,RUNNING,SIMPLEX,MULTICAST> mtu 1500 if not enabled the lan will not work!!! if the set_promisc script fail, you can try to force promiscuous mode using the terminal command "sudo tcpdump" then open another terminal and try again the ifconfig. thx,very much ,i do as you say ,i work!!!!!!!!!!!!!!!thx. but one problem,when i you skype to voice chat ,the skype crash ... Link to comment Share on other sites More sharing options...
peterderkonig Posted October 20, 2008 Share Posted October 20, 2008 I have a BCM5787M in my laptop (Thinkpad R61e with Kalyway 10.5.2) and keep having the system hang when I try and boot with the kext installed. I install it, and it freezes in about 5-10s, and then it hangs about 10s after BSD root when booting up. Any ideas? I've already removed all other BCM kexts, both in /System/Library/Extensions as well as in IONetworkingFamily.kext/PlugIns. To clarify, it doesn't actually kernel panic, just freezes. Link to comment Share on other sites More sharing options...
xghost Posted October 22, 2008 Share Posted October 22, 2008 working here, but kills sleep... Any way to get sleep working again? Great work though! Link to comment Share on other sites More sharing options...
Titto Posted October 22, 2008 Share Posted October 22, 2008 please someone can help about Broadcom BMC5906 kext for Leopard 10.5.4??? any solution or ideas are welcome... please!!! please someone can help about Broadcom BMC5906 kext for Leopard 10.5.4??? any solution or ideas are welcome... please!!! Link to comment Share on other sites More sharing options...
alexandrebini Posted October 23, 2008 Share Posted October 23, 2008 I use Kalyway 10.5.2 and i have this Broadcom in my notebook i've installed PCCard 10.5.2 but when i run ifconfig it returns me just lo0, gif0, stf0 and fw0 Can someone help me? Link to comment Share on other sites More sharing options...
WalterMAC Posted October 23, 2008 Share Posted October 23, 2008 Works great! (Acer 2920) :censored2: Link to comment Share on other sites More sharing options...
nobb1x Posted October 23, 2008 Author Share Posted October 23, 2008 I use Kalyway 10.5.2 and i have this Broadcom in my notebook i've installed PCCard 10.5.2 but when i run ifconfig it returns me just lo0, gif0, stf0 and fw0 Can someone help me? try reading this http://forum.insanelymac.com/index.php?s=&...st&p=906162 Link to comment Share on other sites More sharing options...
strafer Posted October 26, 2008 Share Posted October 26, 2008 thank you so much btw, needs to PCCard.10.5.2.Beta3 for working well on acer 5920g. Link to comment Share on other sites More sharing options...
alexandrebini Posted October 26, 2008 Share Posted October 26, 2008 Thankyou!!! When i use kext helper, it's work! Now, I have a mac! LOL Link to comment Share on other sites More sharing options...
Evgeni Metodiev Posted October 27, 2008 Share Posted October 27, 2008 Will it work with BCM5784M PCI-E, on Dell Studio 15 after some kind of modification. I`m new to the entire HackMack stuff, but am really enthusiastic to make it run flawlesly on my laptop, so if someone can help, message me, please Link to comment Share on other sites More sharing options...
Ideasy Posted October 31, 2008 Share Posted October 31, 2008 Man,Thanks A lot!!! Link to comment Share on other sites More sharing options...
Dmitry-e Posted November 4, 2008 Share Posted November 4, 2008 Yes, bcm5787m work, but now I can't use "Sleep" function! Laptop's display is off, but fan, LEDs, and more another - steel work. And only long press power button can help! Can somebody chek it? I have Acer Aspire 4310. + Kalyway 10.5.2 (vanilla kernel 9.2.2) Link to comment Share on other sites More sharing options...
sakkara Posted November 12, 2008 Share Posted November 12, 2008 when i kextload the driver, a message appears that new ethernet interface is there, but after a few seconds i get kernel panic. when i use kexthelper, i get kernel panic at startup... does anyone have a solution for this? Link to comment Share on other sites More sharing options...
Boombeng Posted November 12, 2008 Share Posted November 12, 2008 Hi, I have Hexedited the BCM5787M Kext with the BCM5784M ID (14e4 1698) and it works!!!!!!! Thank you Nobb1X Here is the kext to install, use Kexthelper, repair permissions and reboot Just follow Nobb1X instructions (Readme file in zip with the kext) to change MAC adress and to be able to connect... Broadcom_5784M.zip Here is the link to download the Magnat2's script which makes utilisation easier http://forum.insanelymac.com/index.php?s=&...st&p=916658 and his "how to" to install the script in menu http://forum.insanelymac.com/index.php?s=&...st&p=920932 1 Link to comment Share on other sites More sharing options...
ridgeline Posted November 12, 2008 Share Posted November 12, 2008 Boombeng that is great now the only thing we lack is the video card driver Link to comment Share on other sites More sharing options...
nobb1x Posted November 12, 2008 Author Share Posted November 12, 2008 when i kextload the driver, a message appears that new ethernet interface is there, but after a few seconds i get kernel panic.when i use kexthelper, i get kernel panic at startup... does anyone have a solution for this? Hmmm, the same problem happened to OmegaX during the test phase of the kext, he solved, i think with a whole new installation, but try to IM he if he's still around Hi, I have Hexedited the BCM5787M with the BCM5784M (14e4 1698) ID and it works!!!!!!! Thank you Noob1X Here is the kext to install with Kexthelper Just follow Noob1X instructions to change MAC adress and to be able to connect... Broadcom_5784M.zip Here is the link to download the Magnat2's script which makes utilisation easier http://forum.insanelymac.com/index.php?s=&...st&p=916658 good job, i ì've modified the thread title and added your post to the first. ty Link to comment Share on other sites More sharing options...
moregain Posted November 15, 2008 Share Posted November 15, 2008 Boombeng, just want to let you know that I just installed your 5784 kext and it worked. Thanks! more Link to comment Share on other sites More sharing options...
SERG555 Posted November 16, 2008 Share Posted November 16, 2008 Boombeng Thanks!!!!!!!!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts