i_Geek Posted August 9, 2008 Share Posted August 9, 2008 sepulchre 1. Run single user mode using the -s flag while booting 2. Mount the file system as mentioned when you boot 3. Change the root password using the command "passwd root" 4. Touch (create) the .AppleSetupDone file by typing "touch /var/db/.AppleSetupDone" Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850227 Share on other sites More sharing options...
ebbyd Posted August 9, 2008 Share Posted August 9, 2008 if downloaded it yesterday, burned it todax and running installation 30 minutes ago the last two minutes are running and i will let me suprise if it work like kalyway do for me report later here Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850266 Share on other sites More sharing options...
mitch_de Posted August 9, 2008 Share Posted August 9, 2008 If you select Realtec/Intel 8169 (LAN ) Patch some files (from orig. IONetwork.kext) are not copied ! Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850275 Share on other sites More sharing options...
sepulchre Posted August 9, 2008 Share Posted August 9, 2008 sepulchre 1. Run single user mode using the -s flag while booting 2. Mount the file system as mentioned when you boot 3. Change the root password using the command "passwd root" 4. Touch (create) the .AppleSetupDone file by typing "touch /var/db/.AppleSetupDone" Many thanks that worked a treat So far everything except my network seems to be working OK. The network pref doesnt contain any adaptors so I guess I picked the wrong option during install, if anyone can help me with that I'd appreciate it Sorted that following the guide and script here for my p5k-e http://forum.insanelymac.com/index.php?showtopic=69132 I should point out this is my first attempt at OSX on a PC and its gone pretty smoothly so far, dual boot with Vista is all good, obviously I'm a noob to all of this but this distro seems to be pretty good to me, so many thanks to Punk92 for it! Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850289 Share on other sites More sharing options...
nickhe Posted August 9, 2008 Share Posted August 9, 2008 i got stuck on 4 pc on do you already have a mac Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850363 Share on other sites More sharing options...
Jack Layne Posted August 9, 2008 Author Share Posted August 9, 2008 4 pc? configuration? Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850373 Share on other sites More sharing options...
robcropper Posted August 9, 2008 Share Posted August 9, 2008 I got stuck on the already own a mac screen also. Will try the method in post #34 Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850379 Share on other sites More sharing options...
homer007 Posted August 9, 2008 Share Posted August 9, 2008 sepulchre 1. Run single user mode using the -s flag while booting 2. Mount the file system as mentioned when you boot 3. Change the root password using the command "passwd root" 4. Touch (create) the .AppleSetupDone file by typing "touch /var/db/.AppleSetupDone" that worked but now it asks for user name and password to login?? i only created a new password!!! Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850380 Share on other sites More sharing options...
filip007 Posted August 9, 2008 Share Posted August 9, 2008 Smooth sailing for me... Next time add HimmelBar... Anyway a big thanks for iDeneb INTEL DP35DP (P35+ICH9R) Xeon E3110 aka Wolfdale E8400 4GB DDR2 800 MHz HD 3870 Sigmatel HD on board Realtek 8139D NET Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850397 Share on other sites More sharing options...
Necrosan Posted August 9, 2008 Share Posted August 9, 2008 Bad CRC extracting the ISO every time. I'm on Linux and can't use Betterzip. Is this release expected to be taken serious? Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850398 Share on other sites More sharing options...
robcropper Posted August 9, 2008 Share Posted August 9, 2008 I am somewhat noob into OSx86 and I am having trouble completing the instructions in post #34. After I use the -s command, what command comes next? -mount uw? 2. Mount the file system as mentioned when you boot The other commands are written out. Any help is appreciated Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850405 Share on other sites More sharing options...
sepulchre Posted August 9, 2008 Share Posted August 9, 2008 that worked but now it asks for user name and password to login?? i only created a new password!!! user name is root Then go into control panel and create the accounts you want Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850406 Share on other sites More sharing options...
Cris900 Posted August 9, 2008 Share Posted August 9, 2008 I have extracted both with the mac, without programs like BetterZip, then with windows, both with winrar that with 7-zip .....without any problem.... Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850408 Share on other sites More sharing options...
sepulchre Posted August 9, 2008 Share Posted August 9, 2008 I am somewhat noob into OSx86 and I am having trouble completing the instructions in post #34. After I use the -s command, what command comes next? -mount uw? 2. Mount the file system as mentioned when you boot The other commands are written out. Any help is appreciated That got me a little stuck as well. I found the command "mount /dev/disknsp" where n = the logical disk number which begins at 0 and p = the partition number which begins at 1. Hope that helps, if not I'm sure someone who knows far more than me will be along to help Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850410 Share on other sites More sharing options...
Grav3Mind Posted August 9, 2008 Share Posted August 9, 2008 Bad CRC extracting the ISO every time. I'm on Linux and can't use Betterzip. Is this release expected to be taken serious? You make a perfect release then complain :] Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850421 Share on other sites More sharing options...
nickhe Posted August 9, 2008 Share Posted August 9, 2008 3.2ghz hp dc7100 4gb ram 250 sata modbin hp 6715b amd tl-60 2.0ghz x2 modbin 4gb ram hp nc6400 intel core 2 duo vanillia 4gb ram intel core 2 quad 3.67ghz hp blackbird 002 vanillia Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850422 Share on other sites More sharing options...
robcropper Posted August 9, 2008 Share Posted August 9, 2008 Thanks for the help, will try that. Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850425 Share on other sites More sharing options...
nickhe Posted August 9, 2008 Share Posted August 9, 2008 Bad CRC extracting the ISO every time. I'm on Linux and can't use Betterzip. Is this release expected to be taken serious? use wine and extract with winrar Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850427 Share on other sites More sharing options...
Jack Layne Posted August 9, 2008 Author Share Posted August 9, 2008 the dvd it works to many, some have of the little ones bug. I have extracted the dvd or from windows that with Mac, and I have not had no problems, as they have not had them many persons. Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850430 Share on other sites More sharing options...
Necrosan Posted August 9, 2008 Share Posted August 9, 2008 Using wine to run winrar worked great. Don't know why I didn't think of that in the first place. In the future punk when you do a new release, could you please use a standard compression program? Thanks again! I can't wait to try this out! Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850440 Share on other sites More sharing options...
pHrail Posted August 9, 2008 Share Posted August 9, 2008 just downloaded this and installed it...the install seemed to go fine, except it doesnt seem to have all the applications you said it has installed? Adium, firefox? I'm having some hardware issues also, I have a geforce 8600GT 1 GB its only reading 32mb of memory. also my sound is not working Motherboard is Asus P5b sound chipset is the ADI1988 Wheres the applications, and can you help me getting the drivers going with sound and video? Thanks Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850444 Share on other sites More sharing options...
robcropper Posted August 9, 2008 Share Posted August 9, 2008 Maybe I'm am doing something wrong, It keeps doing the loop on Transfer from another mac. I think I just need more experience learning commands and so on. I did -s, the I tried the sbins/ mount and the mount /dev/disknsp which took me to root, Then I did the passwrd root, It asked me to retype password and i did. Then I did the touch /var/db/applesetupdone command which did something then took me back to root. I there anything else I should do before typing exit to boot? Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850445 Share on other sites More sharing options...
zarf2005 Posted August 9, 2008 Share Posted August 9, 2008 Installs ok, Everthing goes smoothly until I get to the main apple configuration screen (after the welcome screen), it asks if I have data to transfer over from another mac etc, select no, and then it just loops back to welcome screen again! annoyed because it looked very smooth until then.....have tried a number of different kernels/options without luck. Abit IP35pro Quad core 6600 6GB Nvidia 8800GTX 768MB 2 x 500GB SATA HD in AHCI Mode 1 x Samsung SATA DVD Writer in AHCI Mode Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850472 Share on other sites More sharing options...
-TROWSK- Posted August 9, 2008 Share Posted August 9, 2008 just downloaded this and installed it...the install seemed to go fine, exceptit doesnt seem to have all the applications you said it has installed? Adium, firefox? I'm having some hardware issues also, I have a geforce 8600GT 1 GB its only reading 32mb of memory. also my sound is not working Motherboard is Asus P5b sound chipset is the ADI1988 Wheres the applications, and can you help me getting the drivers going with sound and video? Thanks can you not use your old kext files for that ? thats what i did with kalyways 10.5.2 i downloaded apple original 10.4.5 and grabs all my kexts from there bro hope this helps you out... Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850482 Share on other sites More sharing options...
pHrail Posted August 9, 2008 Share Posted August 9, 2008 i dont have any original kext files? how do i go about getting these and loading the proper ones? Link to comment https://www.insanelymac.com/forum/topic/119853-ideneb-v1-1054/page/2/#findComment-850491 Share on other sites More sharing options...
Recommended Posts