Leaderboard

macOS Sonoma 14.5 (23F79) ( Same build as RC ) Full Installer https://swcdn.apple.com/content/downloads/32/06/062-01946-A_0PEP7JHIWA/1pfs4xh22555dj51fkep7w06s4eiezh21p/InstallAssistant.pkg

Here all fine too

My "new" Hackmini8,1 with RX560x dGPU upgraded from Sonoma 14.4.1 to Sonoma 14.5 without issues. Booting with Open Core 1.0.0. About This Hack: Sonoma 14.5 GB5 Metal Score (Tested in Sonoma 14.4.1) Note that this hack uses the Mobile Radeon RX560x. GB6 Metal Score (Tested in Sonoma 14.5)

macOS Monterey 12.7.5 (21H1222) ( Same build as RC ) Full Installer https://swcdn.apple.com/content/downloads/02/18/052-96238-A_V534Q7DYXO/lj721dkb4wvu0l3ucuhqfjk7i5uwq1s8tz/InstallAssistant.pkg

...nice, normal update from 14.4.1, took all of 20 minutes 💯

No issue

macOS Ventura 13.6.7 (22G720) ( Same build as RC ) Full Installer https://swcdn.apple.com/content/downloads/46/31/052-96247-A_MLN9N00Y8W/dmml3up52hrsb01krjtczmdhexiruv1b5m/InstallAssistant.pkg

https://github.com/0xCUB3/About-This-Hack

👍

With iMac19.1 you don't need R.Event (in my case iMac19.1 the update was notified) ... anyway try this https://github.com/Lorys89/RestrictEvents/releases/tag/1.1.4 no need boot-args Normally in RCs the pkg is not released , also because perhaps the Release will be released on Monday then you will have the pkg so either you wait or download the full ... it's still 13 GB (also for the pkg) 💁‍♂️

---All EFI folders is updated to OpenCore 1.0.1 and all Kexts to last version--- OpenCore MOD - https://www.olarila.com/topic/25111-hackintosh-efi-folders-with-opencore-mod/ OpenCore Official - https://www.olarila.com/topic/5676-hackintosh-efi-folder-with-clover-and-opencore/

To get the incremental update, you need to revert OCLP patches if you're using it then reboot the machine. It will also help if you have revpatch=sbvmm in boot-args in config.plist. Won't hurt to have SIP fully enabled. After try to see if the small update is available. Obviously to use OCLP again, you'll have to revert all the changes you made. Good luck.

OpenCore 1.0.0 is out. Despite the version number, it is not a major change but rather one more step in the continuous evolution of OpenCore. There are quite a few changes and improvements, updating is recommended. You can get it from Acidanthera. Main changes Updated builtin firmware versions for SMBIOS and the rest Utilities now require macOS 10.9+ (OpenCore itself still supports macOS 10.4+) Added AllowRelocationBlock support for 32-bit version Fixed problem loading non-firmware runtime drivers (e.g. OpenRuntime.efi) in OpenDuet Fixed alphabetical ordering in Configuration.pdf. Config.plist Added Booter -> Quirks -> AllowRelocationBlock (support for 32-bit OpenCore): this quirk is needed to boot macOS 10.6 and older with 32-bit kernel in 32-bit OVMF. Hibernation wake is not compatible with this quirk. Sample.plist and SampleCustom.plist: The settings required to reactivate the Broadcom Wi-Fi that have lost support in Sonoma have been added, they are the ones that we already use proposed by OCLP. Kexts AppleALC 1.9.0 HibernationFixup 1.5.0 VoodooInput 1.1.4.

Installing Sonoma , Ventura, Monterey and Big Sur from Clover Duet its a differant story. but Booting Latest Sonoma already installed this is not an issue with clover duet. To make it possible I have to Add NVRAM creation from the Clover duet script but now I dont have the full time to do this. EDIT*** I will make some test tonight then let you know

If you want your "About This Mac" screen in Sonoma 14.5 to show your EliteDesk 800 info, you'll need to edit ~/Library/Preferences/com.apple.SystemProfiler.plist. The format for the "CPU" in com.apple.SystemProfiler.plist is Description, Date For example, for my About This Mac screen below, I changed all instances of CPU description in com.apple.SystemProfiler.plist to "HP EliteDesk 800 G4 Mini, 2018" (without quotes). The iMac descriptions in my com.apple.SystemProfiler.plist become "iMac (HP EliteDesk 800 G4 Mini, 2018)" and the MacMini instances become "Mac mini (HP EliteDesk 800 G4 Mini, 2018)" (without quotes). About This Mac (iMac19,2) My GB6 scores with SMBIOS iMac19,2 EDIT: Performance on this hack, even with i5-8500T, is phenomenal. This little hack is very responsive. The RX560x graphics acceleration over the UHD630 iGPU makes a big difference.

Update failed to “prepare for upgrade”. Rebooted and upgrade went without issue.

Without any basis other than naive optimism, I am expecting Apple to support Intel-based Macs in macOS 15. If that's the case, I'll continue to support this thread. If Apple does not include Intel-based Macs in macOS 15, then I won't be spending much more effort on this thread. The Open Core 1.0.0 EFI that I have attached to Post #1 is working very well for macOS versions through Sonoma 14.5.

---All EFI folders is updated to OpenCore 1.0.1 and all Kexts to last version--- OpenCore MOD - https://www.olarila.com/topic/25111-hackintosh-efi-folders-with-opencore-mod/ OpenCore Official - https://www.olarila.com/topic/5676-hackintosh-efi-folder-with-clover-and-opencore/

HP Z840 upgrade from Sonoma 14.4.1 to Sonoma 14.5 without issues.

Hi and Welcome, you need to read @fantomas post at the top of this page that directs you to the reason why as a new User you are limited and where you can only initially post.

SDL3 version of dosbox-x with sdl2-compat library. This version also has glide support (Voodoo graphics card). Enjoy Minimum deployment target is 14.0. dosbox-x-SDL3.zip

I have built dosbox-x for Intel and Apple Silicon. Works on 10.13 and better. Enjoy dosbox-x-2024.03.01-Universal.zip

Using the Open Core 1.0.0 EFI attached to Post #1, I upgraded from Sonoma 14.4.1 to 14.5 without issues. About This Hack: Sonoma 14.5 Note that SecureBootModel is already Disabled, so I did not need to change this for the Sonoma upgrade. I'm currently testing this hack with the EFI attached to Post #1 (Macmini8,1 SMBIOS with DeviceProperties for both RX560x and UHD630 for multi-display operation), but I have only a single physical display connected to the RX560x DP port and I have Internal Graphics set as Boot VGA in BIOS. This hack works fine with the single physical display and the multi-display EFI. Note that with the single physical display connected to the RX560x DP port and the multi-display EFI, the "About This Hack" screen shot above reports graphics as Radeon RX 560x. It appears to me that the multi-display EFI (configured for a combination of RX560x and UHD630 graphics ports) works just fine, regardless of the physical graphics configuration. GB6 Metal Score after upgrade to Sonoma 14.5

macOS upgrades to Ventura 13.6.7 and Sonoma 14.5 proceeded without issues using the new Open Core 1.0.0 EFI attached to Post #1. Before upgrading Sonoma from 14.4.1 to 14.5, I set OpenCore's SecureBootModel = Disabled. After the Sonoma upgrade, I restored SecureBootModel to j174. About This Hack: Ventura 13.6.7 About This Hack: Sonoma 14.5

I implemented gcc-14.1.0 compilation with some Clover sources changed. The sources can be still compiled by gcc-13 and by xcode-15. Don't know about older versions.

Upgraded my HackBookPro6,2 to Open Core 1.0.0. LegacyBoot, LogoutHook and Vault all working perfectly. Running Big Sur, Monterey, Ventura and Sonoma. Well done, Devs!

@Anto65 The RestrictEvent kext and revpatch=sbvmm command have been deleted. This is the case when installing from scratch. Thanks again.

Thanks my Genius brother, nice solution !!!

Rename Mint.icns -> Ubuntu Ubuntu.icns -> -Ubuntu.icns 😁

Ok. Thanks.

I can't get an incremental update; 13.65 GB. Please, installer.can you share the pkg?

Done.

AMD is alive & kicking

All set.

@BALDY_MAN - Hello old friend, old boy here to the rescue No need for anything complicated, this is an easy fix. On Finder, goto /Library/Logs/DiagnosticReports. Delete all the Files in this folder, reboot, clean Nvram and you're good to go. Cheers!!!

@miliuco Great summary as always. I see that VoodooInput has been updated, but VoodooPS2 has not. According to this, "WARNING: This kernel extension [VoodooInput] is designed to be bundled with a dedicated multitouch client driver and exists for the developers only. Please download the latest version of VoodooPS2 or VoodooI2C to make use of this kext." Just curious as to why developer kext VoodInput was updated without updating the end-user kexts.

OpenTyrian2000 game for macOS, Intel and Apple Silicon. Enjoy Requires macOS 10.14 or better. It is an optimized macOS version. EDIT: Added new features and built a Windows version. EDIT2: Added MSVC builds (ARM64, X64 and X86). EDIT3: Added Linux (ARM64, AMD64 and I386) builds and made releases on Github. EDIT4: Legacy Mac OS X (PPC, I386 and X86_64) version made (10.5 or better). repo: https://github.com/andyvand/opentyrian2000 Binary releases: https://github.com/andyvand/opentyrian2000/releases/tag/2.2.0 opentyrian2000.zip

https://www.apple.com/newsroom/2024/05/final-cut-pro-transforms-video-creation-with-live-multicam-on-ipad-and-new-ai-features-on-mac/

I ran the Unigine Heaven Benchmark just to see if it would run. I think the results are respectable given that this is a mobile RX560x. Without any performance enhancement properties in SSDT/DeviceProperties and with Benchmark set to "Extreme," the results are below. I didn't try to change any benchmark settings from the Extreme defaults. Unigine Heaven Benchmark: Extreme

Amazing @chris1111 one more beautiful than another !!! Hardcore!!!! 😆 Im using Linux Mint, and its awesome program, I loved...and with Clover appears Ubuntu icon, but it's nice!!

https://github.com/tonyyang123/Lenovo-T420-OC If you're interested to install sonoma, maybe give it a try. Forked from tluck and thanks for his contribution

Release v1.0.0 🎉 Updated builtin firmware versions for SMBIOS and the rest Switched to Apple silicon GitHub runner for CI, thx @Goooler Added Apple Silicon support in all provided utilities Utilities now require macOS 10.9+ (OpenCore itself still supports macOS 10.4+) Added AllowRelocationBlock support for 32-bit version Enabled additional serial logging in non-RELEASE builds of OpenDuet Added missing DxeCore ImageContext HOB in OpenDuet Fixed assert caused by dependency ordering in OpenDuet Prevented assert in normal situation when freeing memory above 4GB in OpenDuet Prevented debug assert reporting that optional Hii protocols are not present in OpenDuet Fixed problem loading non-firmware runtime drivers (e.g. OpenRuntime.efi) in OpenDuet Resolved issue using NOOPT debugging in OpenDuet Fixed alphabetical ordering in Configuration.pdf, thx @leon9078

Known Issues, Observations and Solutions Possible RX560x performance increase when adding @0,name and @0,compatible GFX0 properties. See here. I'm suspicious of my 20-byte connectors property in my SSDT-GFX0. While it works, I think it should be 16 or 24 byte as stated here. I tried without success to use Lilu and WhateverGreen debug kexts (to produce debug log and to see discovered connectors). I think it is necessary to try another attempt at producing debug log with the debug kexts so that the correct connectors byte sequence can be created. This is a low priority, since my solution is working. Note that padding the connectors patch with an additional four 0x00 bytes (for a total of 24 bytes) breaks the patch and causes boot to black screen. For those who wish to use a single display connected to the RX560x DP port (no displays connected to UHD630 iGPU ports), this configuration (iMac19,1) or this configuration (iMac19,2) may be desirable. With DAGPM.kext disabled while testing iMac19,2 SMBIOS, I observed hesitation during operation of GeekBench6 and I lost my left mouse button. I did not test long enough to confirm that disabling DAGPM.kext was the cause of this. I am leaving DAGPM.kext enabled and don't plan to test further. See more here. When switching between SMBIOS models during my testing (e.g., switching between Macmini8,1, iMac19,1 and iMac19,2), I noticed that graphics performance improved after more than one reboot / NVRAM reset cycle. I'm not sure why this would be the case, but when switching SMBIOS models, it may be best to reboot and reset NVRAM more than once before running benchmarks. I'm using RestrictEvents.kext property revblock=media on my HackBookPro6,2 and I think it has improved non-metal performance on that old hack. I've seen posts that suggest the property is useful for Metal dGPUs also. I have added this property to my OC config.plist and am testing. At the time of this writing, wake from sleep results in black screen when I use SMBIOS iMac19,2 (possibly for iMac19,1 also - haven't tested). With SMBIOS MacMini8,1, wake works fine. I am using DP->DVI adapters, so this might affect my wake behavior (the reason I needed to add No-hda-gfx property for my original UHD630 solution). I tried darkwake=0 and darkwake=2 boot-args without success. My baseline SMBIOS is MM8,1, so iMac19,x wake is a low-priority fix for me. EDIT: Need to look at com.apple.PowerManagement plists in /Library/Preferences. It's possible that I need to delete these and recreate power management settings, since I'm switching between SMBIOS models during testing (and MM81 was the first SMBIOS I tested).

Done

macOS Monterey 12.7.5 (21H1211)

@chris1111 - Big thanks and Respect Maestro. As always, very much appreciated. PS. I had to transfer all my themes to a Special Themes Folder on a 125 GB Drive. Just because of so many, mostly yours. I am not complaining just grateful for all your Beautiful Theme Uploads.