Leaderboard

macOS Sonoma 14.5 (23F79) ( Same build as RC ) Full Installer https://swcdn.apple.com/content/downloads/32/06/062-01946-A_0PEP7JHIWA/1pfs4xh22555dj51fkep7w06s4eiezh21p/InstallAssistant.pkg

Here all fine too

My "new" Hackmini8,1 with RX560x dGPU upgraded from Sonoma 14.4.1 to Sonoma 14.5 without issues. Booting with Open Core 1.0.0. About This Hack: Sonoma 14.5 GB5 Metal Score (Tested in Sonoma 14.4.1) Note that this hack uses the Mobile Radeon RX560x. GB6 Metal Score (Tested in Sonoma 14.5)

macOS Monterey 12.7.5 (21H1222) ( Same build as RC ) Full Installer https://swcdn.apple.com/content/downloads/02/18/052-96238-A_V534Q7DYXO/lj721dkb4wvu0l3ucuhqfjk7i5uwq1s8tz/InstallAssistant.pkg

...nice, normal update from 14.4.1, took all of 20 minutes 💯

No issue

macOS Ventura 13.6.7 (22G720) ( Same build as RC ) Full Installer https://swcdn.apple.com/content/downloads/46/31/052-96247-A_MLN9N00Y8W/dmml3up52hrsb01krjtczmdhexiruv1b5m/InstallAssistant.pkg

👍

---All EFI folders is updated to OpenCore 1.0.1 and all Kexts to last version--- OpenCore MOD - https://www.olarila.com/topic/25111-hackintosh-efi-folders-with-opencore-mod/ OpenCore Official - https://www.olarila.com/topic/5676-hackintosh-efi-folder-with-clover-and-opencore/

https://github.com/0xCUB3/About-This-Hack

With iMac19.1 you don't need R.Event (in my case iMac19.1 the update was notified) ... anyway try this https://github.com/Lorys89/RestrictEvents/releases/tag/1.1.4 no need boot-args Normally in RCs the pkg is not released , also because perhaps the Release will be released on Monday then you will have the pkg so either you wait or download the full ... it's still 13 GB (also for the pkg) 💁‍♂️

To get the incremental update, you need to revert OCLP patches if you're using it then reboot the machine. It will also help if you have revpatch=sbvmm in boot-args in config.plist. Won't hurt to have SIP fully enabled. After try to see if the small update is available. Obviously to use OCLP again, you'll have to revert all the changes you made. Good luck.

OpenCore 1.0.0 is out. Despite the version number, it is not a major change but rather one more step in the continuous evolution of OpenCore. There are quite a few changes and improvements, updating is recommended. You can get it from Acidanthera. Main changes Updated builtin firmware versions for SMBIOS and the rest Utilities now require macOS 10.9+ (OpenCore itself still supports macOS 10.4+) Added AllowRelocationBlock support for 32-bit version Fixed problem loading non-firmware runtime drivers (e.g. OpenRuntime.efi) in OpenDuet Fixed alphabetical ordering in Configuration.pdf. Config.plist Added Booter -> Quirks -> AllowRelocationBlock (support for 32-bit OpenCore): this quirk is needed to boot macOS 10.6 and older with 32-bit kernel in 32-bit OVMF. Hibernation wake is not compatible with this quirk. Sample.plist and SampleCustom.plist: The settings required to reactivate the Broadcom Wi-Fi that have lost support in Sonoma have been added, they are the ones that we already use proposed by OCLP. Kexts AppleALC 1.9.0 HibernationFixup 1.5.0 VoodooInput 1.1.4.

Without any basis other than naive optimism, I am expecting Apple to support Intel-based Macs in macOS 15. If that's the case, I'll continue to support this thread. If Apple does not include Intel-based Macs in macOS 15, then I won't be spending much more effort on this thread. The Open Core 1.0.0 EFI that I have attached to Post #1 is working very well for macOS versions through Sonoma 14.5.

---All EFI folders is updated to OpenCore 1.0.1 and all Kexts to last version--- OpenCore MOD - https://www.olarila.com/topic/25111-hackintosh-efi-folders-with-opencore-mod/ OpenCore Official - https://www.olarila.com/topic/5676-hackintosh-efi-folder-with-clover-and-opencore/

Installing Sonoma , Ventura, Monterey and Big Sur from Clover Duet its a differant story. but Booting Latest Sonoma already installed this is not an issue with clover duet. To make it possible I have to Add NVRAM creation from the Clover duet script but now I dont have the full time to do this. EDIT*** I will make some test tonight then let you know

If you want your "About This Mac" screen in Sonoma 14.5 to show your EliteDesk 800 info, you'll need to edit ~/Library/Preferences/com.apple.SystemProfiler.plist. The format for the "CPU" in com.apple.SystemProfiler.plist is Description, Date For example, for my About This Mac screen below, I changed all instances of CPU description in com.apple.SystemProfiler.plist to "HP EliteDesk 800 G4 Mini, 2018" (without quotes). The iMac descriptions in my com.apple.SystemProfiler.plist become "iMac (HP EliteDesk 800 G4 Mini, 2018)" and the MacMini instances become "Mac mini (HP EliteDesk 800 G4 Mini, 2018)" (without quotes). About This Mac (iMac19,2) My GB6 scores with SMBIOS iMac19,2 EDIT: Performance on this hack, even with i5-8500T, is phenomenal. This little hack is very responsive. The RX560x graphics acceleration over the UHD630 iGPU makes a big difference.

Update failed to “prepare for upgrade”. Rebooted and upgrade went without issue.

@Anto65 The RestrictEvent kext and revpatch=sbvmm command have been deleted. This is the case when installing from scratch. Thanks again.

EFI with OpenCore 1.0.0 config-14-imac-amd.plist SMBIOS iMac19,1 IMPORTANT: fill in your own SMBIOS data iGPU headless mode and AMD as main card iGPU Enabled in BIOS unfairgva=6 in dGPU properties to get some kind of DRM config-14-macpro.plist SMBIOS MacPro7,1 IMPORTANT: fill in your own SMBIOS data iGPU disabled in BIOS config-extra config-fenvi.plist: if you have a Fenvi combo card or any of the Broadcom wifi chipsets that have lost support in Sonoma and are included in the OCLP root patch config-amfipass.plist: to have the Fenvi card with AMFIpass.kext instead of amfi=0x80 in boot args config-ax210.plist: if you have an Intel AX210 combo card (only wifi) (this file has AirportItlwm.kext but you can try itlwm.kext instead) config-ax210-bt.plist: if you have an Intel AX210 combo card (wifi + Bluetooth) (this file has AirportItlwm.kext but you can try itlwm.kext instead). Notes Rename the selected config to config.plist. Required kexts are not included because of the size of the ZIP file (only CPUFriendDataProvider.kext and UTBMap.kext are included) Fenvi and Broadcom Wi-Fi cards AMFIPass.kext 1.4.0. IO80211FamilyLegacy.kext 1.0.0 / IOSkywalkFamily.kext 1.1.0. Intel supported combo cards - OpenIntelWireless. AirportItlwm.kext / itlwm.kext (Ventura v2.2.0, Sonoma v2.3.0). IntelBluetoothFirmware.kext / IntelBTPatcher.kext. BlueToolFixup.kext: BrcmPatchRAM by Acidanthera. Wi-Fi 6 Intel AX210 on macOS Sonoma. Get back Fenvi T919 and other Broadcom Wi-Fi on macOS 14 Sonoma thanks to OLCP. List of used kexts (not included in the ZIP file): AMFIPass.kext AirportItlwm.kext AppleALC.kext BlueToolFixup.kext CPUFriend.kext IO80211FamilyLegacy.kext IOSkywalkFamily.kext IntelBTPatcher.kext IntelBluetoothFirmware.kext IntelMausi.kext Lilu.kext NVMeFix.kext RestrictEvents.kext SMCProcessor.kext SMCSuperIO.kext USBToolBox.kext VirtualSMC.kext WhateverGreen.kext itlwm.kext. Don't forget any other kext that you are using now. EFI 1.0.0 Sonoma.zip

HP Z840 upgrade from Sonoma 14.4.1 to Sonoma 14.5 without issues.

Hi and Welcome, you need to read @fantomas post at the top of this page that directs you to the reason why as a new User you are limited and where you can only initially post.

SDL3 version of dosbox-x with sdl2-compat library. This version also has glide support (Voodoo graphics card). Enjoy Minimum deployment target is 14.0. dosbox-x-SDL3.zip

I have built dosbox-x for Intel and Apple Silicon. Works on 10.13 and better. Enjoy dosbox-x-2024.03.01-Universal.zip

Using the Open Core 1.0.0 EFI attached to Post #1, I upgraded from Sonoma 14.4.1 to 14.5 without issues. About This Hack: Sonoma 14.5 Note that SecureBootModel is already Disabled, so I did not need to change this for the Sonoma upgrade. I'm currently testing this hack with the EFI attached to Post #1 (Macmini8,1 SMBIOS with DeviceProperties for both RX560x and UHD630 for multi-display operation), but I have only a single physical display connected to the RX560x DP port and I have Internal Graphics set as Boot VGA in BIOS. This hack works fine with the single physical display and the multi-display EFI. Note that with the single physical display connected to the RX560x DP port and the multi-display EFI, the "About This Hack" screen shot above reports graphics as Radeon RX 560x. It appears to me that the multi-display EFI (configured for a combination of RX560x and UHD630 graphics ports) works just fine, regardless of the physical graphics configuration. GB6 Metal Score after upgrade to Sonoma 14.5

macOS upgrades to Ventura 13.6.7 and Sonoma 14.5 proceeded without issues using the new Open Core 1.0.0 EFI attached to Post #1. Before upgrading Sonoma from 14.4.1 to 14.5, I set OpenCore's SecureBootModel = Disabled. After the Sonoma upgrade, I restored SecureBootModel to j174. About This Hack: Ventura 13.6.7 About This Hack: Sonoma 14.5

I implemented gcc-14.1.0 compilation with some Clover sources changed. The sources can be still compiled by gcc-13 and by xcode-15. Don't know about older versions.

Upgraded my HackBookPro6,2 to Open Core 1.0.0. LegacyBoot, LogoutHook and Vault all working perfectly. Running Big Sur, Monterey, Ventura and Sonoma. Well done, Devs!

Thanks my Genius brother, nice solution !!!

Rename Mint.icns -> Ubuntu Ubuntu.icns -> -Ubuntu.icns 😁

Ok. Thanks.

I can't get an incremental update; 13.65 GB. Please, installer.can you share the pkg?

Done.

AMD is alive & kicking

All set.

@BALDY_MAN - Hello old friend, old boy here to the rescue No need for anything complicated, this is an easy fix. On Finder, goto /Library/Logs/DiagnosticReports. Delete all the Files in this folder, reboot, clean Nvram and you're good to go. Cheers!!!

OpenTyrian2000 game for macOS, Intel and Apple Silicon. Enjoy Requires macOS 10.14 or better. It is an optimized macOS version. EDIT: Added new features and built a Windows version. EDIT2: Added MSVC builds (ARM64, X64 and X86). EDIT3: Added Linux (ARM64, AMD64 and I386) builds and made releases on Github. EDIT4: Legacy Mac OS X (PPC, I386 and X86_64) version made (10.5 or better). repo: https://github.com/andyvand/opentyrian2000 Binary releases: https://github.com/andyvand/opentyrian2000/releases/tag/2.2.0 opentyrian2000.zip

Amazing @chris1111 one more beautiful than another !!! Hardcore!!!! 😆 Im using Linux Mint, and its awesome program, I loved...and with Clover appears Ubuntu icon, but it's nice!!

https://github.com/tonyyang123/Lenovo-T420-OC If you're interested to install sonoma, maybe give it a try. Forked from tluck and thanks for his contribution

Everything works without problems

Shortcuts.

Release v1.0.0 🎉 Updated builtin firmware versions for SMBIOS and the rest Switched to Apple silicon GitHub runner for CI, thx @Goooler Added Apple Silicon support in all provided utilities Utilities now require macOS 10.9+ (OpenCore itself still supports macOS 10.4+) Added AllowRelocationBlock support for 32-bit version Enabled additional serial logging in non-RELEASE builds of OpenDuet Added missing DxeCore ImageContext HOB in OpenDuet Fixed assert caused by dependency ordering in OpenDuet Prevented assert in normal situation when freeing memory above 4GB in OpenDuet Prevented debug assert reporting that optional Hii protocols are not present in OpenDuet Fixed problem loading non-firmware runtime drivers (e.g. OpenRuntime.efi) in OpenDuet Resolved issue using NOOPT debugging in OpenDuet Fixed alphabetical ordering in Configuration.pdf, thx @leon9078

Theme Flavours-4D Ready Enjoy Flavours-4D.zip config.plist Setup ⬇︎ Misc -> Boot -> PickerVariant: chris1111\Flavours-4D Misc -> Boot -> Picker Attributes: 145 Misc -> Boot -> Picker Mode->: External Misc->Boot->Timeout->: 5 Misc->Boot->ShowPicker: true Exemple of Linux

EFI MorenoAv.zip

@MorenoAv I would like you to understand that it is not the official OC that breaks Windows but the DSDT ( if this were the case we should all use OC Mod ) If you have ways to build the official OC and disable the DSDT as mentioned above you will see that Windows boot without problems ( maybe something like this is missing !? "If (_OSI("Darwin")) ... " but my skills are not enough for this ) As for the Wi-Fi, I honestly didn't quite understand where the problem was...probably as identified by deeveedee's long eye on an old ioskywalk. kext... However, it is important that you solved it

Done

@eSaF and Other Done Flavours-ShadowSquare 😃 Verry beautiful theme, Iam Happy of it 175 Icons, 67 Linux Distro Flavours-ShadowSquare.zip