Jump to content

8 Screenshots

About This File

Micky1979 and Mirone are glad to present you a new version of AppleHDA Patcher.app that will help you enabling sound on your Hack!

 

AppleHDA Patcher v1.9

http://olarila.com/forum/viewtopic.php?f=18&t=6528

 

AppleHDA Patcher, Jarvis ready

funny? Well, born for fun joking with Mirone about some adventures patching AppleHDA.kext.

Anyway Jarvis is there!

--> Troubleshotting:

 

 

 

 

  • the app require a vanilla AppleHDA from the current system, otherwise can't work.
  • "drag an AppleHDA" functionality serves only if you are trying to patch it for another System and you use this system with the patched kext generated, or if is your saved vanilla kext (backup) and is the version needed by your system (not extracted with pacifist because should be incomplete). Also be sure is not a rollback from a minor version of the system (eg kext from 10.11 in 10.12 or from 10.11.5 in 10.11.6)
  • Generated kexts must be correctly installed (permissions repaired and cache rebuilted), the app did not install anything (look inside ~/Desktop/MironeAudio).
  • if does not work, be sure you have injected the correct layout-id (you can see it in ioreg).
  • if does not work, mind that all the patches are all reported as working by someone else system.
  • If does not work, be sure you have removed thirt party conflictual kexts (voodoohda, AppleALC, AppleHDADisabler, someone else injector), or you have removed or edited from your DSDT/SSDTs someone else patch you have applied previously.
  • There are differences between systems, so if you are sure your System is ok, probably you need a custom patch, we need the codec dump from linux
  • Don't work? Ok, but knowing only that, personally I don't care because mine always work. So comment at least if you are able to provide information like a ioreg firstly, but also your config.plist/patched dsdt or ssdt if any. Also the app as a function called "Jarvis" so a copy-paste of that is also appreciated.

 

 

1- You don't need to have separate patches, now they are implemented within the app, just choose Desktop's or Laptop's.

 

2- Is it possible to patch AppleHDA.kext for different OS X versions, he supports all kexts from 10.7 up to 10.11 (and newer), or by default use the one in /System/Library/Extensions as base for the patches without drag anything.

 

3- You can create kexts through its patched files (Platforms.xml, LayoutX.xml, Info.plist for AppleHDAHardwareConfigDriver.kext )

drag all of your files, choose or type the codec to patch the binary. The process automatically start.

 

4- Is automatically created a full patched AppleHDA.kext + HDAEnabler.kext to be used with all bootloaders, an aDummyHDA.kext and a config.plist *sample (to be used with Clover), an HDEF patch to be used with MaciASL ready with the correct layout-id (in case you chose to patch laptops also an IRQ patch will be generated), and also you will find usefull the CodecCommander.kext + hda-verbs by Rehabman forks.

All files will be placed inside ~/Desktop/MironeAudio, just choose what you need.

 

5- for all steps 1, 2 and 3 you can also drag to the app interface your real config.plist to be edited where necessary.

 

6- The application is able to make corrections remotely updating itself when and if necessary.

 

NOTE:

The app produces various files, off course you do not have to use them all:

 

Use aDummyHDA.kext + edited config.plist for Clover (Ozmosis works similar)

For all other bootloader use the full patched AppleHDA.kext (+ HDAEnabler.kext or DSDT edits... not both).

Use CodecCommander.kext if the sound does not work after the sleep (wake), read more here.

aDummyHDA.kext goes in /System/Library/Extensions

 

Italiano:

 

 

 

1- la nuova app ha tutte le patch incluse, per cui non c’è bisogno di file separati come in passato.

2- è possibile patchare AppleHDA.kext per le diverse versioni di OS X, da 10.7.x a 10.11.x (e versioni successive se non ci saranno cambiamenti). E’ richiesto che AppleHDA.kext sia presente in /System/Library/Extensions/ e che sia vanilla (mai patchato).

 

3- è possibile creare kexts anche importando i vari file che hai fatto tu (Platforms.xml, LayoutX.xml, Info.plist per AppleHDAHardwareConfigDriver.kext):

basta trascinarli sull’interfaccia e il processo partirà automaticamente.

 

4- vengono creati automaticamente un AppleHDA.kext completamente patchato + HDAEnabler.kext per essere utilizzato con tutti i bootloader (ok per Enoch che non può patchare al volo il kext), un aDummyHDA.kext e un campione del config.plist * (da usare con Clover), una patch HDEF da utilizzare con MaciASL pronto con le modifiche per il tuo DSDT con il corretto layout-id (nel caso hai generato una patch per portatili ci sarà anche una patch per gli IRQ sempre da applicare con Maciasl), in più troverete utile il CodecCommander.kext di Rehabman.

Tutti i file saranno collocati sul Desktop in una cartella chiamata “MironeAudio”, basta scegliere quello che vi serve (ricapitolando aDummyHDA.kext + config.plist per Clover, AppleHDA.kext patchato + HDAEnabler.kext per Enoch).

 

5- per tutte le fasi 1, 2 e 3 è anche possibile trascinare nell’interfaccia dell’applicazione il tuo vero config.plist prima di pigiare il bottone “patch AppleHDA”, così il KextsToPatch verrà aggiustato con le patch richieste per far funzionare l’audio. Ovviamente verrà fatta una copia modificata all’interno della cartella “MironeAudio”, nella sottocartella “Clover” che contirne il kext generato. Il tuo non verrà toccato… te lo devi rimpiazzare da solo.

 

6- L'applicazione è in grado di ricevere update in remoto per avere sempre le ultime modifiche ai vari codecs.

 

RICAPITOLANDO:

L'applicazione produce vari file, ma naturalmente non c'è bisogno di usarli tutti:

 

Utilizzare config.plist+aDummyHDA.kext per Clover. Se non avete trascinato il vostro vero config.plist quello generato è solo un esempio con le modifiche da apportare al vostro, da non utilizzare così com’è, altrimenti se lo avete trascinato.. una copia modificata la trovate all’interno di MironeAudio/nome del codec/versione del kext/Clover/config.plist.

Per tutti gli altri bootloader potete utilizzare il “full patched AppleHDA.kext patch” (con HDAEnabler.kext o DSDT modificato con le patch generate ... ma ovvio non entrambi).

Utilizzare CodecCommander.kext se il suono non funziona dopo il wake (risveglio).

 

 

Works in 10.7+

 

Credits:

bcc9 for patch_hda.pl ported to obj-c code by Micky1979

Andy Vandijck for getcodecid command

Pike R. Alpha for the idea of the Dummy kext

Geoff Garside for the zlib implementation

Kabyl and Taruga for the HDAEnabler.kext

Mirone for all the patches

RehabMan, TimeWalker75a, The-darkvoid for the CodecCommander.kext, here.

RehabMan for it's fork of iasl 6.1 available here.

 

// AppleHDA Patcher

//

// Created by Micky1979 and Mirone on 18/11/15.

// Copyright © 2015 Micky1979, Mirone and InsanelyMac.com. All rights reserved.

//


What's New in Version v1.8   See changelog

Released

  • v1.8 Added more codecs for Laptop's and Desktop's.
  • Like 6
  • Thanks 2

User Feedback

Recommended Comments



Micky1979

Posted

it stopped working newest 10.11.4 update 

Thanks. ATM I'm on 10.11.2, so after updating my OS I will try it tomorrow and after We'll made modifications and a new update.

djouija

Posted

Strangest thing is that is just stopped working for me in 10.11.1 prior to update to 10.11.3

 

Cannot seem to get it to work at all now for some reason.. :(

Micky1979

Posted

For me is working well also in 10.11.4.

What is not working? the kext? witch kext?... the app?

Please provide more info.

zhang28163

Posted

For me the generated Clover Patch did not work on 10.11.4 VT1082. The audio information is good in the system report but you can't find the device in the sound panel and no sound is in the output.

zhang28163

Posted

I have rolled back to 10.11.3 and the patch starts to work again.

Micky1979

Posted

Sir what's your controller?

zhang28163

Posted

Oh, it is VIA VT1802_1 8 Series/C220 Series Chipset High Definition Audio Controller

Caveman55

Posted

Awesome Work!! 

vanmoo

Posted

I'm using 10.10.5 I'm unable to locate a vanilla applehda at the moment. 

 

Found a Vanilla kext. Works perfectly. Copied Vanilla applhda back to s/l/e/ and using clover edit and adummyhda.kext. Thanks!

 

@pet1 i also facing the same problem, where did u get the vanilla version of the AppleHDA.

 

Thanks,

vanmoo

Posted

Hi @mirone , my codec is ALC271x VB3, im using your AppleHDA for yosemite, but the kext loaded super long, about 1 hour and the sound is coming, i also need to change the sampling rate, it only work for a couple second and gone static, (no sound at all)...

Mirone

Posted

which is the version of your system?

The static sound problem can be solved

with codec_commader.

cwestpha

Posted

Getting an error with ALC1150 on Z170 (Asrock Z170 Extreme 6+) under OS X 10.11.3

Hardware info:
- Realtek ALC1150 (10ec:0900) Rev.(00100001)
- Controller 8086:a170 (sub-ven:1849:1151)
- Driver: AppleHDA.kext

Choosen codec is Realteck ALC 1150
Checking 16 range comparisons between 11d4198b and 10ec0900
Found range comparison 11d41983
Found range comparison 11d41984
2 codec range comparison(s) to patch
config.plist created and copied to ~/Desktop/MironeAudio/!

HDAEnabler.kext created with layout-id 5!
Zeroing 11d41983 codec
Zeroing 11d41984 codec
	occurrences 1 of 2 expected patched!
	occurrences 2 of 2 expected patched!
Patching 11d4198b with 10ec0900 codec
AppleHDA binary succesfully patched!
failed to patch layout5.xml.zlib..
failed to patch layout7.xml.zlib..
failed to patch layout9.xml.zlib..
AppleHDAHardwareConfigDriver.kext/Contents/Info.plist patched!
Problem patching xml files, aborting

for Clover Config running:

HDAS to HDEF (SERBUw== to SERFRg==)
no other Audio patches at the moment.
Micky1979

Posted

 

Getting an error with ALC1150 on Z170 (Asrock Z170 Extreme 6+) under OS X 10.11.3

Hardware info:
- Realtek ALC1150 (10ec:0900) Rev.(00100001)
- Controller 8086:a170 (sub-ven:1849:1151)
- Driver: AppleHDA.kext

Choosen codec is Realteck ALC 1150
Checking 16 range comparisons between 11d4198b and 10ec0900
Found range comparison 11d41983
Found range comparison 11d41984
2 codec range comparison(s) to patch
config.plist created and copied to ~/Desktop/MironeAudio/!

HDAEnabler.kext created with layout-id 5!
Zeroing 11d41983 codec
Zeroing 11d41984 codec
	occurrences 1 of 2 expected patched!
	occurrences 2 of 2 expected patched!
Patching 11d4198b with 10ec0900 codec
AppleHDA binary succesfully patched!
failed to patch layout5.xml.zlib..
failed to patch layout7.xml.zlib..
failed to patch layout9.xml.zlib..
AppleHDAHardwareConfigDriver.kext/Contents/Info.plist patched!
Problem patching xml files, aborting

for Clover Config running:

HDAS to HDEF (SERBUw== to SERFRg==)
no other Audio patches at the moment.

 

Your AppleHDA appear to be incomplete or malformed..

vanmoo

Posted

 

which is the version of your system?
The static sound problem can be solved
with codec_commader.

 

i'm using your ALC271x.zip for laptop with layout id 3

Perdu

Posted

Grazie Micky

Grazie Mirone

 

  • Like 1
Mirone

Posted

i'm using your ALC271x.zip for laptop with layout id 3

you can not use 10.10.5
and use AppleHDA to 10.11.3,
perhaps this is the problem,
or you may be missing the patch IRQ's
in your DSDT.
cwestpha

Posted

Your AppleHDA appear to be incomplete or malformed..

I figured it out. there was a phantom /Volumes/EFI that was forcing my clover EFI to be mounted as /Volumes/EFI 1 and thus the scripts couldn't find the config.plist. Oops. x.x

 

I am going to wait for the 10.11.4 nvidia web drivers to be released, roll back the Apple HDA stuff to generic, and then try again from scratch. Would you recomend I use this patcher or your code in the Pandora's box release?

 

P.S. with your patch do I even need the hdef DSDT patch to rename HDAS to HDEF for 100 series chipsets??

Zackptg5

Posted

Fantastic Work. I've been using a DummyHDA kext for a while now and it's been buggy and temperamental but the aDummyHDA from here just works and it generates the files needed if I decide to use another method of applehda patching. Couldn't be happier

regs1980

Posted

aDummyHDA.kext + config.plist not work for Realtek ALC898

Mirone

Posted

@regs1980,

post your config.plist+aDummyHDA.

regs1980

Posted

aDummyHDA.kext works in S\L\E

dont work's in EFI\Clover\kext\10.11

why not

cwestpha

Posted

Moved back to vanilla for everything and re-created everything with the 1.2 release. It is lasting longer before I get audio issues. However, I still have the detected ALC1150 devices appearing in Hebrew(?) and when there is more than one sound source being mixed it cuts out until I stop all audio playing and then restart with only one source (like a flash video and OS X system sound or a videogame that uses a mix of audio voices).

Zip contains output from patcher run, IOReg dump, aDummyHDA.kext, and config.plist. MironeAudio.zip

coLATin

Posted

my board is gigabyte H170TN, ALC887VD, not working, not front ports, only pink and green port at back, I chose layout=5 to create the files, system info is wrong, although i can see the icon(black not grey), but no sound at all, there is my Codec file, would someone help me?

Codec: Realtek ALC887-VD
Address: 0
Vendor Id: 0x10ec0887
Subsystem Id: 0x1458fa10
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x2c 0x2c]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="PCM Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC887-VD Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x2c 0x2c]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x40 0x40]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x40 0x40]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC887-VD Analog", type="Audio", device=0
  Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
  Amp-In vals:  [0x1c 0x1c]
  Converter: stream=7, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
  Amp-In vals:  [0x90 0x90]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
  Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x05 0x0b
Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x11 [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x4004c000: [N/A] Line Out at Ext N/A
    Conn = RCA, Color = UNKNOWN
    DefAssociation = 0x0, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x10
Node 0x12 [Pin Complex] wcaps 0x400401: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Speaker Phantom Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000036: IN OUT Detect Trigger
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000036: IN OUT Detect Trigger
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0e
Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000036: IN OUT Detect Trigger
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0f
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Jack", index=0, device=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003736: IN OUT Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01a19030: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x3, Sequence = 0x0
  Pin-ctls: 0x21: IN VREF_50
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373e: IN OUT HP Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="PCM Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Line Out Jack", index=0, device=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00003736: IN OUT Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01014020: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x40: OUT VREF_HIZ
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400481: Stereo
  Pincap 0x00000024: IN Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x40330429: [N/A] CD at Ext N/A
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x2, Sequence = 0x9
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital
  Pincap 0x00000020: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=24
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 12
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x40 0x40]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x25 0x0b


×
×
  • Create New...