161 replies to this topic

[fingerr]

Jim Fish, on Feb 21 2008, 02:34 PM, said:

Hi All,

Anybody know where I can download the files that are mentioned in the first post. I get an error stating "files are missing". Thanks in advance. I am hoping they will get my PCMCIA wireless card working on my IBM X31 running 10.5.2.

Cheers. Jim

Hi,

you mean IOPCCardFamily_chunnan_Tiger_rev3.zip ? For me link works, maybe try other web browser?

Regards,
Mariusz.

[Jim Fish]

Hi Mariusz,

yes thats the one  - IOPCCardFamily_chunnan_Tiger_rev3.zip.

I tried in IE and Firefox and Safari but all come back with this error:-


Board Message
Sorry, an error occurred. If you are unsure on how to use a feature, or don't know why you got this error message, try looking through the help files for more information.


The error returned was:
Sorry, some required files are missing, if you intended to view a topic, it's possible that it's been moved or deleted. Please go back and try again




Not sure why - I have been able to download other files without problem. Jim

[Jim Fish]

That's reassuring then. I will try again tomorrow. JimThat's reassuring then. I will try again tomorrow. Jim

[mitch_de]

Mariusz, on Feb 21 2008, 12:57 PM, said:

Maybe they are now, but no one mentioned that this method worked under OSX.... and I think first person who will succeed under OSX will report it immedaitely to this forum Be patient and stay tuned ...

Regards,
Mariusz.

HI,
lspci works for me (OS X port , extracted out of the ATKOS R3 patch), shows PCI informations.

Its usefull for this Cardbus Problems.
In this thread (Post #96)  bronxboyXXX  used it to get the buildin multicardreader (SDCARD ...) useable.
Only an add in the /etc/rc must be done (using setpci XXXXX ) to have it working every bootup.
I will try that on my Aspire 3682 today, and tell result.

[fingerr]

mitch_de, on Feb 21 2008, 05:50 PM, said:

HI, lspci works for me (OS X port , extracted out of the ATKOS R3 patch), shows PCI informations.Its usefull for this Cardbus Problems.In this thread (Post #96)  bronxboyXXX  used it to get the buildin multicardreader (SDCARD ...) useable.Only an add in the /etc/rc must be done (using setpci XXXXX ) to have it working every bootup.I will try that on my Aspire 3682 today, and tell result.

Sounds nice, can you post this ported commands? I will try too on my Tecra.Regards,Mariusz.

[mitch_de]

bronxboyXXX, on Feb 19 2008, 03:36 PM, said:

Hi Chun-Nan

Good news

l

...

To toggle the register type setpci -s 06.3 4c=0x22. If you already have your card installed you should see it recognized immediately. If not insert it and a nice little box comes up asking if you would like to import your photos, also a desktop icon should appear for the card. I'm using FC6 with a toshiba laptop but this should work for other distro's as well. After you test it don't forget to add it to your /etc/rc.local so it will happen at bootup and be ready whenever you need it. Below is the card in my laptop. Good luck!

lspci
05:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
05:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
05:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
05:06.4 Class 0805: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller

lspci -n
05:06.0 0607: 104c:8031
05:06.2 0c00: 104c:8032
05:06.3 0180: 104c:8033
05:06.4 0805: 104c:8034

Ps: i very much appreciate your hard work its truly a quality driver.

I now startet with the pci tools.
But something is missed (only 3 devices )

amiacer:~ ami$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
....
....
01:03.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
...
01:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
01:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14)
(missed SD Controller ?! as  forth TI deivce)


amiacer:~ ami$ lspci -n
....
01:09.0 0607: 104c:8039
01:09.2 0180: 104c:803b
(missed 2 TI devices) ?


HERE PCIUTILS for OS X (darwin)
http://www.megaupload.com/?d=S0J6J7FF

[fingerr]

bronxboyXXX, on Feb 22 2008, 01:52 AM, said:

There it is! "01:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)"This is what we need. You now need to activate it. Type in "setpci -s 01:09.2 4c.b=0x02" or "setpci -s 09.2 4c.b=0x02", then try "lspci" again and you should see one or two more devices in the list. Or, you can simply test your SD card reader.

I'm so excited...

What Version of OSX are you on? I tried to install Your package but got an error "You cannot continue there is nothing to install"
so I manually installed the package but its still not working (same Bus error as before).   anybody have a clue on how to compleatly uninstall this? I got all the files but Im missing something because even with the files gone  the OS still acknowledges the commands.
ps: one of the devices you seem to be missing mitch_de is firewire. I guess its possible your Laptop does not have Firewire or it's driver is missing. On another note our computers seem identical but mines is a Sony Vaio. Just more Proof that in the world of computers Names mean nothing; Including Apple's. But they sure look good.

Hi,
I have installed the package and lspci shows my devices but setpci -s 01:09.2 4c.b=0x02 does not change anything. I think OSX does not have driver to handle this device.

p.s.
Here is the linux driver source for it http://openfacts.ber...x12/xx21_driver and soem wiki http://openfacts.ber.....2Fxx21 driver.

Regards,
Mariusz.

[condemorerror]

Tanks for your job. Today, my ricoh Ricoh RL5C476 now working. Tanks, tanks, tanks, ...

[riws]

10.4.11 beta kexts
1524:1410 ENE Technology Inc CB1410 Cardbus Controller

Not working  


With Tiger rev3 it hard freazes, so how to provide logs from it? It turns the Card on, its a Cardbus USB Controller Card with VIA Chipset

[truetigger]

HI people. Thanks for all your work and help. Will this work on 1.5.1 Leopard?

[kizwan]

truetigger, on Feb 24 2008, 09:39 PM, said:

HI people. Thanks for all your work and help. Will this work on 1.5.1 Leopard?

Hi,
For leopard support please go to this thread:-
CardBus/PCMCIA PC Cards for Leopard

Good luck.

[truetigger]

kizwan, on Feb 24 2008, 05:42 PM, said:

Hi,
For leopard support please go to this thread:-
CardBus/PCMCIA PC Cards for Leopard

Good luck.

Thanks alot

[truetigger]

tried to replace kexts IOPPC and now on reboot i get kernal panic. I backed up the old ones, but dont know how to get into mac to replace them. Any suggestions?

[enzobelmont]

good news everyone!!!  AMD finally is releasing R300 R400 and R500 chipsets specs!!!

news Link!  http://sourceforge.n...0mail.gmail.com

Docs: http://www.x.org/doc...ration_v1.1.pdf

Please somebody inform Slice.

thanks.

[Slice]

enzobelmont, on Feb 24 2008, 11:21 PM, said:

good news everyone!!!  AMD finally is releasing R300 R400 and R500 chipsets specs!!!

news Link!  http://sourceforge.n...0mail.gmail.com

Docs: http://www.x.org/doc...ration_v1.1.pdf

Please somebody inform Slice.

thanks.

Thank you! Why these message here?

[enzobelmont]

Slice, on Feb 24 2008, 02:57 PM, said:

Thank you! Why these message here?

sorry....  hehehe

[joblo10]

mitch_de, on Feb 21 2008, 04:50 PM, said:

HI,
lspci works for me (OS X port , extracted out of the ATKOS R3 patch), shows PCI informations.

Hi,

You can grab the pcitulis package from my website. The iAtkos DVD got it from there. I also made an update yesterday to the port, that fixed an issue with Tiger.

http://www.x86dev.or...php?topic=307.0

Thanks

[tivimac]

ok, this is my list for pci devices using chunnan rev3, I really want to activate the card reader, so if someone can help.....

tivito$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

~ tivito$ lspci -n
00:00.0 0600: 8086:2590 (rev 04)
00:02.0 0300: 8086:2592 (rev 04)
00:02.1 0380: 8086:2792 (rev 04)
00:1c.0 0604: 8086:2660 (rev 04)
00:1d.0 0c03: 8086:2658 (rev 04)
00:1d.1 0c03: 8086:2659 (rev 04)
00:1d.2 0c03: 8086:265a (rev 04)
00:1d.3 0c03: 8086:265b (rev 04)
00:1d.7 0c03: 8086:265c (rev 04)
00:1e.0 0604: 8086:2448 (rev d4)
00:1e.2 0401: 8086:266e (rev 04)
00:1e.3 0703: 8086:266d (rev 04)
00:1f.0 0601: 8086:2641 (rev 04)
00:1f.1 0101: 8086:266f (rev 04)
00:1f.3 0c05: 8086:266a (rev 04)
06:05.0 0280: 8086:4220 (rev 05)
06:06.0 0607: 104c:8031
06:06.2 0c00: 104c:8032
06:06.3 0180: 104c:8033
06:06.4 0805: 104c:8034
06:07.0 0200: 10ec:8139 (rev 10)

my laptop is a COMPAQ V4000 series....all is working fine here... (AUDIO, VIDEO with QE/CI, PCCARD, FIREWIRE) using an Intel Pentium M 2.13 w/1GB. DDR Ram

Mariusz, on Feb 22 2008, 06:10 AM, said:

Hi,
I have installed the package and lspci shows my devices but setpci -s 01:09.2 4c.b=0x02 does not change anything. I think OSX does not have driver to handle this device.

p.s.
Here is the linux driver source for it http://openfacts.ber...x12/xx21_driver and soem wiki http://openfacts.ber.....2Fxx21 driver.

Regards,
Mariusz.

[joecas]

I have a Toshiba Satellite 5100-501 with osx 10.4.7

This is the dmesg result:
IOPCCard info: Intel PCIC probe:
IOPCCard notice: Bad bridge mapping at 0xfce01000!
IOPCCardBridge::
start failed
IOPCCard info: Intel PCIC probe:
IOPCCard notice:
Bad bridge mapping at 0xfce00000!
IOPCCardBridge::start failed

Could someone help me ?

[Slice]

joecas, on Mar 7 2008, 01:26 PM, said:

I have a Toshiba Satellite 5100-501 with osx 10.4.7

This is the dmesg result:
IOPCCard info: Intel PCIC probe:
IOPCCard notice: Bad bridge mapping at 0xfce01000!
IOPCCardBridge::
start failed
IOPCCard info: Intel PCIC probe:
IOPCCard notice:
Bad bridge mapping at 0xfce00000!
IOPCCardBridge::start failed

Could someone help me ?

It is mistake in IOPCIFamily. Try to change the version. For example this