940 replies to this topic

[kramer2k]

cyclonefr, on Nov 20 2007, 10:24 PM, said:

2..4.6 tested  CEQO but same perf exactly as 2.4.5
opengl:150
UI:37
Quart 76

First things first...
A question that really hasn't been asked yet...
Is this complied for Tiger or Leo?  Or can we use it for both?

Secondly, 246 still doesn't work with Leo using NVinject, NvidiaEFI 1.0.2, or Natitdual
All hang at my previously posted error

I know I'm not a coder, but what changed from 2.1 to 2.2 to make it not work on nF3?  Anyway that we can implement that on the current version?  And why the heck won't 2.1 work on Leo?

K

[Slice]

kramer2k, on Nov 21 2007, 05:54 AM, said:

First things first...
A question that really hasn't been asked yet...
Is this complied for Tiger or Leo?  Or can we use it for both?

Secondly, 246 still doesn't work with Leo using NVinject, NvidiaEFI 1.0.2, or Natitdual
All hang at my previously posted error

I know I'm not a coder, but what changed from 2.1 to 2.2 to make it not work on nF3?  Anyway that we can implement that on the current version?  And why the heck won't 2.1 work on Leo?

K

I am a coder.
Here is the natit version that do not make gart-width=0x40.
Version 2.2 and later has a different classes structure then 2.1. It is not a problem, but during rewrite joblo makes some mistakes that I repeat. Now I am catching bugs.
Second thing is that 2.1 use very few gart table entries so it don't crashes using its.
Try this natit and AGPGart246. May be I found one more mistake for nForce.
Compare natit.info.plist with your existing, may be you need to add some value.

NEXT

Attached Files

•  Natit.kext.zip   12.11K   233 downloads

[GERGÖ]

Slice, on Nov 20 2007, 01:57 PM, said:

As I see

There are no 848 chipset.
Upload your ioreg from the command
ioreg -l -x -w 1024 >ioregGergo.txt
I shall try to add your bus to the driver.

Hi! Thank u for your help.My  dev. id is listed there:  848 is 865 like and has the same 2571 id. I'll try it and report back.THX

[Slice]

O yes!
I found great difference 2.1 and 2.2
2.1

	while( (phys = mem->getPhysicalSegment64(offset, &len)))
	{
		offset += len;
		len = (len + PAGE_MASK) & ~PAGE_MASK;
		while( len > 0) 
		{
			BUG_ON(phys & 0xffffff0000000ffcULL);
			pte = (phys & 0x000000ff00000000ULL) >> 28;
			pte |=(phys & 0x00000000fffff000ULL);
			pte |= GPTE_VALID | GPTE_COHERENT;
			OSWriteLittleInt32( agpInfo->gartArray, agpOffset, pte);
			agpOffset += 4;

2.2

	while( (phys = mem->getPhysicalSegment(offset, &len)))
	{
		offset += len;
		len = (len + PAGE_MASK) & ~PAGE_MASK;
		while( len > 0) 
		{
			phys |= addrMask;
			OSWriteLittleInt32(gartArray, gartOffset, phys);

This is a difference in 32bit and 64bit gart. But in 2.1 agpOffset +=4 - the same 4 bytes   
Other change - "nvidia_set_aperture" that is not used by 2.1 but used by 2.2 Is it bad setting?
Without good advice I can only propose you test different combination to find a good one.

[Slice]

It is not a problem to create AGPGart64, but I don't know is it work or no.
For this version AAPL,gart-width=0x40 would be good setting.
Is there anyone want to try it?

[kramer2k]

Slice, on Nov 21 2007, 11:39 AM, said:

It is not a problem to create AGPGart64, but I don't know is it work or no.
For this version AAPL,gart-width=0x40 would be good setting.
Is there anyone want to try it?

Still no go with 264 w/ Natit you provided...will try 64

[verleihnix]

both doesn't work.
blue blank  screen.

[cyclonefr]

is this version for me also Slice? im running I865   and X1600 (using natit)

[YKWIA]

I'm wondering, Is AGPGart64 a 64 bit version of the kext or is it the Leopard compatible one?

[Slice]

Why you ask me? Try and report!
I will ask you what do I change to make it working. I have no Leo to test.

[Bu_Kandar83]

@Slice

Does AGP support ATI RX300 se-265hm PCI-Experss  --- 0x5B601002

my Leopard can handle my chipset withOUT QE/CI support

Sorry i'm newbie on mac, can i pach it ??? How ??

[cyclonefr]

same result with AGPGART64 as 246 : xbench OPENGL=149, UI=37here is the ioregsame result with AGPGART64 as 246 : xbench OPENGL=149, UI=37here is the ioreg

[Slice]

Bu_Kandar83, on Nov 22 2007, 08:11 PM, said:

@Slice

Does AGP support ATI RX300 se-265hm PCI-Experss  --- 0x5B601002

my Leopard can handle my chipset withOUT QE/CI support

Sorry i'm newbie on mac, can i pach it ??? How ??

5b601002 directly full supported by any version of MacOSX. So simply delete AGPGart, AppleI386PCI or any other AGP driver as you have PCIexpress. Your drivers are ATIRadeon9700*.*

cyclonefr, on Nov 22 2007, 08:24 PM, said:

same result with AGPGART64 as 246 : xbench OPENGL=149, UI=37here is the ioregsame result with AGPGART64 as 246 : xbench OPENGL=149, UI=37here is the ioreg

Thank you cyclonefr for the try. Now I know that AGPGart64 have no new mistake. As you know from our discussion   at x86dev that's   for Intel. Thinking about principically new driver. v3.0

Where is kramer2k? He can get working driver for leo.

[ExExibit]

hey Slice

I have a problem with yours AGPGart.kext. I've tested your kext with natit, nvinject - black screen with cursor and natit from this topic - blue screen without cursor.

My configuration
MB: Intel D845PESV
VideoCard: nvidia 6600

my ioreg http://rapidshare.co.../ioreg.zip.html

Also it says while botting "AGP: not supported 244e"

I used latest version of kext.
If you need more info PM me where can I find for real time chatting.

Я в irc чате после 18:00 по Московскому времени под ником Graff

[thorne]

Worked fine for the PCI -> AGI bridge on my HP Pavilion zx5280.  However, if I add Callisto, it will not boot to the user interface (not even a blue screen).  Without Callisto (b.005) installed, it will boot into the user interface, and uses the ATI 9700 kext - but no CI and QE support, and I can't change the resolution.

[Slice]

Once again.
No AGP video work in MACOSX86 because of all video drivers Radeon and nVidia works as PCI.

Nontheless I have a hope  

EDITED: I am wrong! It works but many related problems.

NEXT

[resetu]

I installed the latest version 2.4.6, after reboot, my Tiger can not enter into desktop, the screen was flashing, then I change the 060400 to 0604 or CC_060400 (my xp told me) then I reinstalled it again, I can enter into the desktop, but it seems it did not do any affect, my graphic card still shows PCI.

Jas 10.4.8 on Dell D600, a Radeon 9000 was installed.

  the ioreg.txt was captured after I changed the string. hope it helps.

Attached Files

•  ioreg.txt   224.58K   7 downloads

[ExExibit]

Slice, can you help me?

[Slice]

thorne, on Nov 24 2007, 12:16 AM, said:

Worked fine for the PCI -> AGI bridge on my HP Pavilion zx5280.  However, if I add Callisto, it will not boot to the user interface (not even a blue screen).  Without Callisto (b.005) installed, it will boot into the user interface, and uses the ATI 9700 kext - but no CI and QE support, and I can't change the resolution.

Yes, I have observations that AGPGart is not compatible with Callisto. Dunno why. You can't change resolution because the ATI9700 do not. It is Callisto for this operation. About QE/CI support - the current problem for all AGP Radeon9xxx.

resetu, on Nov 24 2007, 04:40 PM, said:

I installed the latest version 2.4.6, after reboot, my Tiger can not enter into desktop, the screen was flashing, then I change the 060400 to 0604 or CC_060400 (my xp told me) then I reinstalled it again, I can enter into the desktop, but it seems it did not do any affect, my graphic card still shows PCI.

Jas 10.4.8 on Dell D600, a Radeon 9000 was installed.

  the ioreg.txt was captured after I changed the string. hope it helps.

ExExibit, on Nov 25 2007, 06:24 PM, said:

Slice, can you help me?

You both have Intel845 and AGPGart is still not working for it. I try to resolve the problem.

Quote

"AGP: not supported 244e"

This is another bus with the same class. Not a problem!

[Slice]

ExExibit, on Nov 25 2007, 06:24 PM, said:

Slice, can you help me?

Welcome to russian forum
http://applelife.ru/...art=#entry30567