1879 replies to this topic

[Scrizz]

yup that's all I need now, my second output to work....  

[fangxh]

Scrizz, on Aug 7 2007, 11:30 PM, said:

  here's the package for the x1950gt:

x1950_gt_7288.zip

don't forget to repair permissions

Thanks! It working for me!
Great!

[basjes]

I will try this as soon as i get home from work.

Thanks a lot.   I will keep you posted

[8ender]

krell, on Aug 7 2007, 12:15 AM, said:

Bronya, I think Nimpi is right. I did it with my Powercolour 1950Pro AGP now.

1. Install jccools driver first, remove everything except ATINDRV.kext
2. Copy everything from your package except  ATINDRV.kext to /System/Library/Extensions

I have ATI  Displays 4.5.9 installed before these steps so I don't know whether it will cause any trouble.

I had kernal panic with AGPGart, once removed it everythink is just working fine! DVI with CI/QE full res!

This method worked for me with no ATI Displays installed. I had a hell of a time getting anything over DVI or VGA before installing jccools driver. I think it wasn't recognizing my LCD properly.

1. Install jccools, reboot into non CI/QE mode over DVI, change resolution.
2. Overwrite all extensions with Bronya's extensions except for ATINDRV.kext, reboot.
3. It just works, even DVI!

This is with an 7280 id Ati Radeon 1950 Pro 256mb on PCI-E, running a fresh install of Tub's 4.10 Test1.

Bronya you are a star for getting this working. I've held back on running OSX on my system because of the poor video performance playing videos and such at 1680x1050. I can finally start using OSX every day.

[palote]

anyone with a x1950pro 512mb fully working?

Thanks in advance...

[Zero Morning]

Thx so much, Bronya.
My display works fine.
i just follow krell 's idea.
Mine display card is HCL 1950Pro 512MB AGP with Dual DVI.
no need the VGA adapter.

[bierbo24]

if this work you are god i will test it now

[bierbo24]

wohoooooo it works gecube x1950 pro 512MB GDDR3

[oiasdas]

I cannot wait to try this.  I have a Saphire AGP 512mb x1950pro with dual DVI.  Before I install though, I need to know if dual monitors is working, as I have them working now under a different video card.  Also, it would be great if someone that has this working could write up a step by step guide on how to get this working for newbies, and for people like me who would much rather follow directions than tinker for hours to get it working.



Thanks a lot.

[x86phre3x]

Anybody experiencing mouse tearing after installing the kexts? Any fix?

[Scrizz]

with my x1950gt(7288) pack in post #36 there is no need to install jcools package, as I have included the atindrv

[ashmcleod]

x86phre3x, on Aug 10 2007, 04:48 AM, said:

Anybody experiencing mouse tearing after installing the kexts? Any fix?

I'm getting the same problem. And after changing my resolution to 1440x900x32 in the com.apple.Boot.plist my resolution changes to 1152x864 after reboot, any ideas?

[Mafiose]

JaS 10.4.8 Asus X1950pro Pcie not work (kernel crash)

[daven1986]

hi guys, is it likely that this card will work with dual screens?

http://www.ebuyer.co.../product/126851

thanks

daven

[umg]

jas 10.4.8 sapphire x1950pro pci full working.

  thanx for effort  

[frEEki]

yeah.. sounds like what i was looking for!!

Only Problem.. i am quite a noob.

I am going to do a clean new install of osx tomorrow. Dont know if its going to be 10.4.8 or uphook 10.4.9.

Just bought myself a p35-DS3 board and a 6650 C2D so i have to test with version installs best.

Can anyone around here give me a step by step walkthrough for getting my x1950pro running (incl. the needed drivers?) That would be awesome!

I allready had it running with an old 6600GT AGP but since i have a more powerfull card lying around i want to use this one!

So... if anyone can help me that would be very nice. I guess many ppl could use such a guide too!

regards
MS

[oiasdas]

I am going to attempt to get my x1950pro up and running this afternoon.  I sure hope it works.

[Bronya]

8ender, on Aug 9 2007, 04:54 PM, said:

This method worked for me with no ATI Displays installed. I had a hell of a time getting anything over DVI or VGA before installing jccools driver. I think it wasn't recognizing my LCD properly.

1. Install jccools, reboot into non CI/QE mode over DVI, change resolution.
2. Overwrite all extensions with Bronya's extensions except for ATINDRV.kext, reboot.
3. It just works, even DVI!

This is with an 7280 id Ati Radeon 1950 Pro 256mb on PCI-E, running a fresh install of Tub's 4.10 Test1.

Bronya you are a star for getting this working. I've held back on running OSX on my system because of the poor video performance playing videos and such at 1680x1050. I can finally start using OSX every day.

I tried as you have made it - double display works for me through DVI, but does not work qe/ci, works only rotation!
I tried all of the driver:
1) Inside atindrv.kext 4 drivers lay - ATY_Alopias , Aty_Caretta, etc.
2) ATY_Alopias.kext is works DVI, but does not work QE/CI!
3) ATY_Caretta.kext - does not work both VGA and DVI - there is no signal!
4) ATY_Sphyrna.kext - too does not work!
5) ATY_Wormy.kext - works QE/CI and shows through VGA! Through DVI does not show, there is no signal!!!

So it is necessary to code, that worked through DVI !

Me interests that works for others through DVI.

What it " Tub's 4.10 Test1 "? Thanks!

[Polymere]

Hi all

I try to download the initial archive from Bronya but the zip look like broken and I don't what I must change in the .kext for my X1950 Pro 7280 009a from other version :/

Please help me.

Polymere

[Scrizz]

so wormy would work through dvi>vga dual screens?

Polymere, try this pack

 atiradeonx1950pro_dmitrik_Edited.zip   1.13MB   590 downloads