Jump to content

AppleHDA Solution - Work in progress

Taruga

By Taruga,
in AppleHDA

 Share
4,108 posts in this topic

Recommended Posts

PabloPCX
PabloPCX
Posted
Posted
MaxL,

 

That's called a kernel panic.

This is a problem with the default kernel that comes with the JaS DVD's. You need to get a new one. DaemonES worked for me. Post 1080 in this thread explains how to do it. BTW- There is a note concerning this in the first post.

 

Pablo,

Do you get that message when you run HDAPatcher or after reboot?

If you get it when running HDAPatcher, see the note above to MaxL.

 

If you get it when rebooting, your new kext is probobly not compatable with your system.

Boot into singleuser mode (hit F8 when you see the blinking cursor at the beginning of boot and type -s and hit enter).

Find the kext (in /System/Library/Extensions) and rename or remove it.

I have no idea how to get a working kext though.

 

Thank you very much MaxL by your aid, I am inexperienced in this single one I take to 3 days occupying Mac OS X

 

You me you would recommend the file to me that I need to be able to make work a "Conexant HD Audio" if he were so amiable

 

Thanks  -_-

Link to comment
Share on other sites
ilmar
ilmar
Posted
Posted
Drag and drop a linux codec dump into AppleHDA Patcher

Some of them, can be found here: http://psykopat.free.fr/apple/AppleHDA/

 

well... i think i am stupid...

 

from the link above i downloaded some txt files for my alc880. Are thi files linyx dump files or not???

if not - where can find dump files i need?

if yes - how can i use them??? i tried drag&drop them to patcher, copy-paste text from files - no results...

 

sorry my dumb questions & my english:)

Link to comment
Share on other sites
Glow Bow
Glow Bow
Posted
Posted

Hi there, boys & girls. At first, i want to say sorry in advance for my English - im Russian.

I have my MAC OS x86 (JaS Install DVD 10.4.8 w Semthex 8.8.1 kernel) on this HW:

ASUS P5WDG2-WS

Core 2 Duo E6300

512Mb x2 OCZ RAM

 

Where is a question

Mobo has an ICH7R bridge with integrated Analog Devices 1988b codec.

After OS X installation there is no audio devices in system.

In a way to fix what i've tried:

AppleAC97Audio.kext method (patching AppleIntelICHAudio.kext + AppleAD19x.kext) - can't end it up, coz i don know a Codec ID (like ADSxx) of AD1988B (spend half-night in searching on this forum & reading manuals|datasheets)

AppleAzaliaAudio.kext method - not working for me.

AppleHDA.kext method with AppleHDAPatcher - ver 1.11 do a patch, but after rebooting where is still no Audio devices in system. ver 1.15 only showin' up my Vendor & Device ID's but do nothing.

But i've some interesting info in log of ioreg, there is it:

| | +-o pci8086,27d8@1B <class IOPCIDevice, registered, matched, active, busy 0, retain count 9>

| | | +-o AppleHDAController <class AppleHDAController, registered, matched, active, busy 0, retain count 7>

| | | +-o IOHDACodecDevice@0 <class IOHDACodecDevice, registered, matched, active, busy 0, retain count 6>

| | | +-o IOHDACodecDriver <class IOHDACodecDriver, !registered, !matched, active, busy 0, retain count 5>

| | | +-o IOHDACodecFunction@1 <class IOHDACodecFunction, registered, matched, active, busy 0, retain count $

Could anyone explain to me that is it means?

If i thinkin' in a right way - ICH7R controller is supported, but no support for AD1988b codec in system.

Thanx in advance.

Link to comment
Share on other sites
TECH_ATTACK
TECH_ATTACK
Posted
Posted
Hi there, boys & girls. At first, i want to say sorry in advance for my English - im Russian.

I have my MAC OS x86 (JaS Install DVD 10.4.8 w Semthex 8.8.1 kernel) on this HW:

ASUS P5WDG2-WS

Core 2 Duo E6300

512Mb x2 OCZ RAM

 

Where is a question

Mobo has an ICH7R bridge with integrated Analog Devices 1988b codec.

After OS X installation there is no audio devices in system.

In a way to fix what i've tried:

AppleAC97Audio.kext method (patching AppleIntelICHAudio.kext + AppleAD19x.kext) - can't end it up, coz i don know a Codec ID (like ADSxx) of AD1988B (spend half-night in searching on this forum & reading manuals|datasheets)

AppleAzaliaAudio.kext method - not working for me.

AppleHDA.kext method with AppleHDAPatcher - ver 1.11 do a patch, but after rebooting where is still no Audio devices in system. ver 1.15 only showin' up my Vendor & Device ID's but do nothing.

But i've some interesting info in log of ioreg, there is it:

| | +-o pci8086,27d8@1B <class IOPCIDevice, registered, matched, active, busy 0, retain count 9>

| | | +-o AppleHDAController <class AppleHDAController, registered, matched, active, busy 0, retain count 7>

| | | +-o IOHDACodecDevice@0 <class IOHDACodecDevice, registered, matched, active, busy 0, retain count 6>

| | | +-o IOHDACodecDriver <class IOHDACodecDriver, !registered, !matched, active, busy 0, retain count 5>

| | | +-o IOHDACodecFunction@1 <class IOHDACodecFunction, registered, matched, active, busy 0, retain count $

Could anyone explain to me that is it means?

If i thinkin' in a right way - ICH7R controller is supported, but no support for AD1988b codec in system.

Thanx in advance.

 

 

 

Just Use Patcher V. 1.13, then Digital Out is working good. (only 2 Channels, but 44,1Khz, 48Khz and 96KHz)

 

I hope Multichannel and Input will come in future Releases from that Great Work of Taruga!

Link to comment
Share on other sites
MaxL
MaxL
Posted
Posted
MaxL,

 

That's called a kernel panic.

This is a problem with the default kernel that comes with the JaS DVD's. You need to get a new one. DaemonES worked for me. Post 1080 in this thread explains how to do it. BTW- There is a note concerning this in the first post.

 

Thanx for answer! I'll try.

Link to comment
Share on other sites
fotopro
fotopro
Posted
Posted

elRey :

@fotopro: how did you get it working?

 

It's simple,I did Just drag and drop a linux codec dump into AppleHDA Patcher only.(codec from Post #1158 )

 

but ,I worked and AppleHDAPatcher_v1.13

 

Attention !This Patcher working in language English system,So ,If you are other language system(EX:chinese system),Please changing your system language to English before this Patcher.

Link to comment
Share on other sites
night's eye
night's eye
Posted
Posted

:hysterical::rolleyes::rolleyes::rolleyes:

Hello, guys!

First, I'm sorry for my english, because I'm a chinese.

I'm using the mac os x 10.4.6. All are work but my conexant HDA. I don't how can let my soundcard work. So please help me.

 

Following is the all of my soundcard:

 

Codec: Generic 14f1 ID 5045

Address: 0

Vendor Id: 0x14f15045

Subsystem Id: 0x103c30bb

Revision Id: 0x100100

Default PCM: rates 0x140, bits 0x0e, types 0x1

Default Amp-In caps: N/A

Default Amp-Out caps: N/A

Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out

Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1

Amp-Out vals: [0x22 0x22]

Pincap 0x0810014: OUT EAPD Detect

Pin Default 0x90170110: [Fixed] Speaker at Int N/A

Conn = Analog, Color = Unknown

Pin-ctls: 0x40: OUT

Power: 0x0

Connection: 2

0x19* 0x17

Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out

Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x08113c: IN OUT HP Detect

Pin Default 0x0121401f: [Jack] HP Out at Ext Rear

Conn = 1/8, Color = Green

Pin-ctls: 0xc0: OUT HP

Power: 0x0

Connection: 2

0x19* 0x17

Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out

Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1

Amp-Out vals: [0xab 0xab]

Pincap 0x08113c: IN OUT HP Detect

Pin Default 0x01813030: [Jack] Line In at Ext Rear

Conn = 1/8, Color = Blue

Pin-ctls: 0x20: IN

Power: 0x0

Connection: 2

0x19* 0x17

Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital

Pincap 0x0810: OUT

Pin Default 0x21447040: [Jack] SPDIF Out at Sep Rear

Conn = RCA, Color = Yellow

Pin-ctls: 0x00:

Connection: 1

0x18

Node 0x14 [Pin Complex] wcaps 0x400081: Stereo

Pincap 0x081124: IN Detect

Pin Default 0x97a70050: [Fixed] Mic at Int Riser

Conn = Analog, Color = Unknown

Pin-ctls: 0x24: IN

Node 0x15 [Pin Complex] wcaps 0x400001: Stereo

Pincap 0x0820: IN

Pin Default 0x99330060: [Fixed] CD at Int ATAPI

Conn = ATAPI, Color = Unknown

Pin-ctls: 0x00:

Node 0x16 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out

Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1

Amp-Out vals: [0x06]

Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In

Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1

Amp-In vals: [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94]

Power: 0x0

Connection: 5

0x19 0x14 0x12 0x11 0x15

Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital

PCM: rates 0x040, bits 0x06, types 0x5

Node 0x19 [Audio Output] wcaps 0xc11: Stereo

PCM: rates 0x540, bits 0x0e, types 0x1

Power: 0x0

Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1

Amp-In vals: [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Power: 0x0

Connection: 5

0x17 0x14* 0x12 0x11 0x15

Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono

Link to comment
Share on other sites
mauhur
mauhur
Posted
Posted

HI!

 

For all of you out there having kernel panic problems with the SEMTHEX kernel.

I'm using a sigmatel 7661 (ven 8384/dev 7661) and was experiencing kernel panics everytime I ran the patch using the semthex kernel.

 

Here's how I fixed it:

Change the kernel to demonES, just like post #1080 said and patched the AppleHDA using the new kernel and v1.15 patch.

Then I forgot to boot on the demonES again :whistle: and went back to semthex. everything was working fantastic.

 

Anyway here's my codec, hope it helps.

 

OBRIGADÃO TARUGA :D

card_9225.txt

Link to comment
Share on other sites
etc
etc
Posted
Posted

I've used STAC9200.txt to patch my AppleHDA.kext (Patcher v15, 14 and 13, Dell Inspiron e1505/6400), sound work, but some sounds scratching and stumming :), iTunes is ok, but sound stumming at start. Plz, anyone, who has e1505, which dump u've used or, maybe, other patcher?

Link to comment
Share on other sites
DaveGee
DaveGee
Posted
Posted (edited)

Thank you Taruga for the excellent effort!

 

Audio Codec: STAC9274D

Mobo: Bad Axe 2

Working: 2.1 (listed as "Internal Audio")

 

I can't speak for the following since I don't have the gear (in my computer room) to do any additional tests...

 

Mic Support (unknown)

Surround Sound 5.1 or 7.1 (unknown I only have 2 speakers & woofer here)

Digital Out (unknown, my audio gear is elsewhere)

Digital In (unknown, my audio gear is elsewhere)

 

Oh and I patched using v1.15 and the dump from the top post on page 59...

 

Thanks again for all the efforts!

 

Dave

Edited by DaveGee
Link to comment
Share on other sites
elRey
elRey
Posted
Posted

i'm going crazy

every time i start the patcher i get : please shut down you computer by using the etc.

please taruga, can you make a multylingual version, cause my instalation is german ;)

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...