Jump to content

Alc269 Autoswitch and HDMI output help


13 posts in this topic

Recommended Posts

Hi, I`ve installed the VoodooHDA-v2.8.4.Lion.pkg for my Alc269 codec on a samsung notebook, both the internal mic and the mic input works great with autoswitching, the problem is that the speakers and the headphones port works but I have to change manually in System Preference also the HDMI output audio is not working.

 

I`ve attached my pin config from regedit in Windows and also the byte flipped txt too, also the codecdump.txt made in osx.

 

All nodes seems to be ok except for node 29 wich byte flipped is: 4014a205

 

Can I have some help with it? Some else have the same problem with the alc269 in notebooks?

 

Thanks in advance!

codecdump.txt

pinconfigwindows.txt

pinconfigwindowsbytefliped.txt

Link to comment
Share on other sites

Thanks I'll vive it a try!

Hello

I believe that VoodooHDA 2.8.4 support your codec, try just install, without edit it...

That's how I got working everything but the hdmi output and auto switch doesn't!

I think HDMI audio won't work if your GPU outputs AV type 2 (meaning analog only) under OS X, regardless of proper ALC269 support. Is it an Atom/ION powered notebook? If yes, forget about HDMI audio.

I have a core i3 powered notebook with intel hd 4000 gpu

  • Like 1
Link to comment
Share on other sites

this opition apperas for you?

attachicon.gifScreen Shot 2014-07-07 at 11.06.30 PM.png

 

remenber, the sound HDMI is controlled by the TV.

Yes, the hdmi output appears listed, it just doesn´t work

You must edit your DSDT to have 7-series (HD 4000) HDMI audio. Good luck!

 

How should I do that? Do you know a good post with tutorial on it?

Link to comment
Share on other sites

So which of patches should we choose? I have working sound and mic, but no hdmi sound with VoodooHDA. Also I've tried to install patched AppleHDA for my ALC269 with IRQ fix by Rehabman and DSDT layout edit (28), but there was no hdmi audio too. I have laptop with i7-3517u, Intel HD4000 and GT640m (but I don't need nVidia graphics at all in my hackintosh, because I think it is very difficult to get it work properly with integrated intel graphics, if that is not true, plz tell me more about it). Please help me to get hdmi audio work.

Link to comment
Share on other sites

Hello!

 

I think, that you have to patch the bin of Capriframebuffer for your used iG. If sound is working with the patchedn AppleHDA.kext, there is a good chance to get it working. Look in the Intel GFX section for changing the table layout  for HDMI with a hex editor. I think that should work also for ALC 269. I have done it on an Lenovo device with 10.8 and it has worked. It is a bit trial and error. For safety you should try that on a clone of your working system, if something is going wrong, you don´t lose your main system.

 

Have fun.

Link to comment
Share on other sites

 Share

×
×
  • Create New...