chris1111 Posted September 9, 2013 Share Posted September 9, 2013 Christ, for you hardware you geek bench and other test it's low. I have the same and I get 18.000. Check you configurations! picasso ok thanks Iam going to cheek picasso what is your bios setting ?? Link to comment Share on other sites More sharing options...
Picasso Posted September 10, 2013 Share Posted September 10, 2013 picasso ok thanks Iam going to cheek picasso what is your bios setting ?? Default Settings! I don't know how to manage the CPUPowerManagment, maybe it's there the difference. I don't touch that things because I don't understand too much that part. Link to comment Share on other sites More sharing options...
eranj Posted September 13, 2013 Share Posted September 13, 2013 <key>GraphicsEnabler</key> <string>Yes</string> <key>IntelAzulFB</key> <string>10</string> How do I know what which value I should type in "IntelAzulFB"? I have 4770k and Gigabyte H87-D3H. Link to comment Share on other sites More sharing options...
ham4ever Posted September 14, 2013 Share Posted September 14, 2013 How do I know what which value I should type in "IntelAzulFB"? I have 4770k and Gigabyte H87-D3H. just try from 1 to 15 till u get succesful boot Link to comment Share on other sites More sharing options...
slayer2333 Posted September 14, 2013 Share Posted September 14, 2013 Do you guys know how to convert these values for clover? Link to comment Share on other sites More sharing options...
hansei Posted September 22, 2013 Share Posted September 22, 2013 I'm a bit lost. What's an injector? Can someone tell me what do I need to do to make the HD2500 work well? :? I have a Z77-DS3H v1.1 motherboard with an i5 3570 (not K) processor. In "System Report > Graphics/Displays" it says "No Kext Loaded". I've tried downloading the latest version of Chameleon and adding IntelCapriFB to the Chameleon bootlist with no luck. I've tried all posibilites from 1 to 11, having "GraphicsEnabler" set to "yes". I'm missing something. Link to comment Share on other sites More sharing options...
Picasso Posted September 22, 2013 Share Posted September 22, 2013 What I am doing wrong? I Have a z87x-ud5h with i74770K, 660 ti latest Cmamaleon I have 10.8.5 working perfect in my system I change bios to ICPX, I put GE= Yes IntelAzulFB= 1 to 15 I can't get more than apple screen Any help? Link to comment Share on other sites More sharing options...
chris1111 Posted September 23, 2013 Share Posted September 23, 2013 What I am doing wrong? I Have a z87x-ud5h with i74770K, 660 ti latest Cmamaleon I have 10.8.5 working perfect in my system I change bios to ICPX, I put GE= Yes IntelAzulFB= 1 to 15 I can't get more than apple screen Any help? with the Graphics geforce 660 ti not need Intelazul (Hd4600) Try to boot GraphicsEnabler=No -v respecte cap and space Link to comment Share on other sites More sharing options...
Picasso Posted September 23, 2013 Share Posted September 23, 2013 with the Graphics geforce 660 ti not need Intelazul (Hd4600) Try to boot GraphicsEnabler=No -v respecte cap and space I know about 660! I'm trying to get both working, 4600 for the system and nvidia for processing video in DaVinci and Final Cut X Link to comment Share on other sites More sharing options...
rayap Posted September 23, 2013 Share Posted September 23, 2013 @Picasso In my trial setup, connecting each DVI-D - one on motherboard and other on ATI card - gets full QE/CI working. Using dsdt injection for IGPU of AAPL,kg-platform-id = 00000604. Using the AppleIntelAzulFB=0 does not seem satisfactory. 1 Link to comment Share on other sites More sharing options...
hansei Posted September 23, 2013 Share Posted September 23, 2013 Is it possible to get the HD2500 working using the VGA output and a 1440x900 resolution? Link to comment Share on other sites More sharing options...
Picasso Posted September 28, 2013 Share Posted September 28, 2013 @Picasso In my trial setup, connecting each DVI-D - one on motherboard and other on ATI card - gets full QE/CI working. Using dsdt injection for IGPU of AAPL,kg-platform-id = 00000604. Using the AppleIntelAzulFB=0 does not seem satisfactory. I was trying to work with DSDT and always I can´t boot. I´m not good with that level. Without DSDT I have working everything perfect in z87x-ud5h. But I couldn´t get HD4600 working. I´m trying to know someone with expierence working with two cards in 10.8.5 Big renders and video for me it´s the point. Link to comment Share on other sites More sharing options...
rayap Posted September 28, 2013 Share Posted September 28, 2013 @Picasso Two discrete graphic cards in addition to the integrated graphics, tried it once before on my trial setup. After fumbling along now in better shape with integrated graphics and the only AMD card. Still sorting out the HDAU situation. 1 Link to comment Share on other sites More sharing options...
Rinnefy Posted October 9, 2013 Share Posted October 9, 2013 Sorry, I am newbie. How to enable Intel HD 4600? I don't really understand. Link to comment Share on other sites More sharing options...
Rinnefy Posted October 15, 2013 Share Posted October 15, 2013 Can I enable Intel HD 4600 on VGA monitor? Link to comment Share on other sites More sharing options...
ComicsNight Posted October 21, 2013 Share Posted October 21, 2013 hello i have a UEFI Bios motherboard so i use clover bootloader . my question can i use a intel hd graphics dsdt patcher to get qe/ci graphics working with my intel hd graphics 2400 or do i need to edit config.plist with a set of key/string with my device id and vendor id's? Link to comment Share on other sites More sharing options...
ham4ever Posted October 22, 2013 Share Posted October 22, 2013 System can't boot with only intel hd 4600 ,, stuck in [AGPM Controller] unknownPlatform but when i click keyboard i hear system working fine and when boot System, with AMD HD 4850 + intel 4600 then system boot with two GPU even if intel 4600 is default then it boots fine. any help or suggest ? Link to comment Share on other sites More sharing options...
armyaircorp Posted October 26, 2013 Share Posted October 26, 2013 How do I find my Intel Capri? Link to comment Share on other sites More sharing options...
dj_fle Posted October 29, 2013 Share Posted October 29, 2013 How's it looking for Intel Graphics 4400? Cheers! Link to comment Share on other sites More sharing options...
Diazz72 Posted November 6, 2013 Share Posted November 6, 2013 Hi guys, how do i know what id to use, i have Asus x75VB whit Intel i5-3230m, nVidia 740M / iNTEL HD4000. Link to comment Share on other sites More sharing options...
styrian Posted November 6, 2013 Share Posted November 6, 2013 You have to try the possibilities. In most cases 3 or 4 are matching. These numbers would I try at first. Have fun. Link to comment Share on other sites More sharing options...
crusher Posted November 12, 2013 Share Posted November 12, 2013 Please give DSDT injection for my HD4000.I have and GT630.But everytime see one card-GT630.Please help how to setting my system for this problem. This is my DSDT,IORegExplorer and Send Me file. Link to comment Share on other sites More sharing options...
pokenguyen Posted November 12, 2013 Share Posted November 12, 2013 Please give DSDT injection for my HD4000.I have and GT630.But everytime see one card-GT630.Please help how to setting my system for this problem. This is my DSDT,IORegExplorer and Send Me file. So you want to use GT630 or HD4000 in OS X? Only one card is enabled at a time. Link to comment Share on other sites More sharing options...
crusher Posted November 12, 2013 Share Posted November 12, 2013 Look this post work three card no two in desktop machine: http://www.insanelymac.com/forum/topic/286474-about-using-discrete-and-integrated-graphics-at-the-same-time/ I want to use both graphics on desktop computers..... Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted November 20, 2013 Share Posted November 20, 2013 AFAIK for HD4000 + discrete graphics to work at the same time you must set the HD4000 as primary GPU in the BIOS. I don't know what a GT 630 is, but if you have a Kepler card that works with GraphicsEnabler=n you must now set GraphicsEnabler=y and SkipNvidiaGfx=y. As for the rest, follow the instructions in the first and second posts. Link to comment Share on other sites More sharing options...
Recommended Posts