67 replies to this topic

[Shailua]

EXPERIMENTAL! UNSTABLE! WARNING! KITTENS!

Hi again everybody. After tinkering with updating the AtherosL1cEthernet drivers (http://www.insanelym...ver-for-107108/) I decided to try porting from scratch the newer ALX driver from here:
http://www.linuxfoun.../networking/alx
Much of what I said in the AtherosL1cEthernet thread also goes for this driver, so please browse over it quickly if you get a chance.

While the latest news update on the ALX page suggested they were stripping out support for the earlier drivers, the code for these seems to be still intact in the latest patches so it seemed worth trying to port, especially with many newer motherboard revisions apparently containing the AR8161 chip and causing people much frustration. Once again I've only been able to test this code on my AR8151. There are a lot of rough edges, but "release early, release often" as they say. There are essentially two low-level sections of code, one for the AR81(31/32/51/52) and another for the newer ones. I can't really vouch for the stability of the newer chipset code. Most of the low-level stuff is mostly portable and unmodified from the Linux code though.

Wake on LAN/demand works for me so far, but I haven't yet enabled TSO, VLAN and other advanced stuff. For now I'm just attempting to get the basic driver working.

Installing:
Use your favourite method of adding kexts to /System/Library/Extensions. Personally I prefer doing it manually from the terminal.
For testing or reporting bugs, please use the kext in the "Debug" subdirectory. This will output much more info to /var/log/system.log.

Remove any old version:
sudo rm -rf /System/Library/Extensions/ALXEthernet.kext
(Don't forget to also remove any potentially conflicting kexts from the Extensions directory, e.g. AtherosL1cEthernet.kext!)

Copy the new version from wherever you extracted it, such as Downloads:
sudo cp -r /Users/yourusername/Downloads/ALXEthernet/ALXEthernet.kext /System/Library/Extensions/

Update the kernel cache:
sudo touch /System/Library/Extensions
Then wait a couple of minutes or so before rebooting. This should trigger kextd to rebuild the cache.
(Alternatively you could completely remove the old cache first:
sudo rm -rf /System/Library/Caches/com.apple.kext.caches/*
But this is best ran from single user mode (-s) where kextd isn't active and watching for changes in the background.)

If you find your system becomes unbootable due to panics, the easiest way to fix this is to temporarily disable the ethernet card in the BIOS/UEFI, boot into Mac OS X and then perform the the first and last installation steps above.

Alternative (test) install:
To avoid breaking your system if the module is installed but panics every time, you can just test by installing to the temporary directory:
sudo cp -r /Users/yourusername/Downloads/ALXEthernet/ALXEthernet.ext /tmp/

Then load the module for testing:
sudo kextload /tmp/ALXEthernet.kext

The contents of /tmp will be automatically wiped upon reboot so you'll have to repeat these two steps each time.

Changelog:
1.0.2 - Bug fixes that should help clean up memory allocation problems at boot time (with a little luck). VLAN is now possible for anyone that needs it, but I've only tested it minimally.

1.0.1 - Bug fixes and refinements. Manually setting the link speed should work properly now and might be an option if autonegotiation is causing issues. The link watchdog timer should generally be working better now. Changed some Linux code that was automatically enabling MSI-X interrupts on newer chips. I have no idea if these are supported properly on Mac OS X, but to be safe I'd rather keep everything on plain old MSI for now.

1.0.0 - The initial release. Don't be fooled, it's likely very unstable!

Downloads:
The zip files are (hopefully) attached to this post. They contain the kext module and the GPL sourcecode. The kext in the "Debug" folder is mostly the same as the regular kext, but prints much more information to the system logs.

Latest:
20121117  ALXEthernet-1.0.2.zip   319.41K   1270 downloads
MD5 (ALXEthernet-1.0.2.zip) = dbdc587f2b4905515571a7ce2bd55c8f

Previous:
20121106  ALXEthernet-1.0.1.zip   315.85K   306 downloads
MD5 (ALXEthernet-1.0.1.zip) = ed621f34f91e60b5422734401b6bdb6e

20121103  ALXEthernet-1.0.0.zip   315.37K   176 downloads
MD5 (ALXEthernet-1.0.0.zip) = 78c0d329237e1ac726bd737493b45724


Like I said in the other thread: I'm just throwing this driver/code out there and seeing what happens. I can't provide serious help or even guarantee a reply if things don't work for anyone. Enjoy and please tell me what card type you have for any feedback if possible!

While kernel panics should hopefully not happen if everything is installed correctly, if anybody gets a regular panic and feels up to it then it would be incredibly useful for me if you were to enable verbose mode at boot with the -v flag and snap me a (readable) photograph of the panic screen along with which Mac OS X version they're using (e.g. 10.8.2) along with the driver version used (e.g. 1.0.1). I can then hopefully trace exactly where in the code things are going wrong. Usually these things are from buffer allocations gone horribly wrong.

[ElGringo]

Shailua, on 03 November 2012 - 10:22 AM, said:

EXPERIMENTAL! UNSTABLE! WARNING! KITTENS!

Hi again everybody. After tinkering with updating the AtherosL1cEthernet drivers (http://www.insanelym...ver-for-107108/) I decided to try porting from scratch the newer ALX driver from here:
http://www.linuxfoun.../networking/alx
Much of what I said in the AtherosL1cEthernet thread also goes for this driver, so please browse over it quickly if you get a chance.

While the latest news update on the ALX page suggested they were stripping out support for the earlier drivers, the code for these seems to be still intact in the latest patches so it seemed worth trying to port, especially with many newer motherboard revisions apparently containing the AR8161 chip and causing people much frustration. Once again I've only been able to test this code on my AR8151. There are a lot of rough edges, but "release early, release often" as they say. There are essentially two low-level sections of code, one for the AR81(31/32/51/52) and another for the newer ones. I can't really vouch for the stability of the newer chipset code. Most of the low-level stuff is mostly portable and unmodified from the Linux code though.

Wake on LAN/demand works for me so far, but I haven't yet enabled TSO, VLAN and other advanced stuff. For now I'm just attempting to get the basic driver working.

Installing:
Use your favourite method of adding kexts to /System/Library/Extensions. Personally I prefer doing it manually from the terminal.
For testing or reporting bugs, please use the kext in the "Debug" subdirectory. This will output much more info to /var/log/system.log.

Remove any old version:
sudo rm -rf /System/Library/Extensions/ALXEthernet.kext

Copy the new version from wherever you extracted it, such as Downloads:
sudo cp -r /Users/yourusername/Downloads/ALXEthernet/ALXEthernet.kext /System/Library/Extensions/

Clean out the kernel cache:
sudo rm -rf /System/Library/Caches/com.apple.kext.caches/*

Then reboot to be safe.

Changelog:
1.0.0 - The initial release. Don't be fooled, it's likely very unstable!

Downloads:
The zip files are (hopefully) attached to this post. They contain the kext module and the GPL sourcecode. The kext in the "Debug" folder is mostly the same as the regular kext, but prints much more information to the system logs.

Latest:
20121103 ALXEthernet-1.0.0.zip
MD5 (ALXEthernet-1.0.0.zip) = 78c0d329237e1ac726bd737493b45724



Like I said in the other thread: I'm just throwing this driver/code out there and seeing what happens. I can't provide serious help or even guarantee a reply if things don't work for anyone. Enjoy and please tell me what card type you have for any feedback if possible!

Shailua, on 03 November 2012 - 10:22 AM, said:

EXPERIMENTAL! UNSTABLE! WARNING! KITTENS!

Hi again everybody. After tinkering with updating the AtherosL1cEthernet drivers (http://www.insanelym...ver-for-107108/) I decided to try porting from scratch the newer ALX driver from here:
http://www.linuxfoun.../networking/alx
Much of what I said in the AtherosL1cEthernet thread also goes for this driver, so please browse over it quickly if you get a chance.

While the latest news update on the ALX page suggested they were stripping out support for the earlier drivers, the code for these seems to be still intact in the latest patches so it seemed worth trying to port, especially with many newer motherboard revisions apparently containing the AR8161 chip and causing people much frustration. Once again I've only been able to test this code on my AR8151. There are a lot of rough edges, but "release early, release often" as they say. There are essentially two low-level sections of code, one for the AR81(31/32/51/52) and another for the newer ones. I can't really vouch for the stability of the newer chipset code. Most of the low-level stuff is mostly portable and unmodified from the Linux code though.

Wake on LAN/demand works for me so far, but I haven't yet enabled TSO, VLAN and other advanced stuff. For now I'm just attempting to get the basic driver working.

Installing:
Use your favourite method of adding kexts to /System/Library/Extensions. Personally I prefer doing it manually from the terminal.
For testing or reporting bugs, please use the kext in the "Debug" subdirectory. This will output much more info to /var/log/system.log.

Remove any old version:
sudo rm -rf /System/Library/Extensions/ALXEthernet.kext

Copy the new version from wherever you extracted it, such as Downloads:
sudo cp -r /Users/yourusername/Downloads/ALXEthernet/ALXEthernet.kext /System/Library/Extensions/

Clean out the kernel cache:
sudo rm -rf /System/Library/Caches/com.apple.kext.caches/*

Then reboot to be safe.

Changelog:
1.0.0 - The initial release. Don't be fooled, it's likely very unstable!

Downloads:
The zip files are (hopefully) attached to this post. They contain the kext module and the GPL sourcecode. The kext in the "Debug" folder is mostly the same as the regular kext, but prints much more information to the system logs.

Latest:
20121103 ALXEthernet-1.0.0.zip
MD5 (ALXEthernet-1.0.0.zip) = 78c0d329237e1ac726bd737493b45724



Like I said in the other thread: I'm just throwing this driver/code out there and seeing what happens. I can't provide serious help or even guarantee a reply if things don't work for anyone. Enjoy and please tell me what card type you have for any feedback if possible!

Lenovo Y480 AR8161 Gigabit, had a couple of KPs (might have been some other problem but coincided with the kext install) and now seems to have settled. Everything seems to be working OK (DHCP IP, etc.), App Store, etc. Will keep you posted if anything develops. Thanks for getting this together, I think a lot of folks are looking for AR8161 solution.

[Shailua]

Thank you for the feedback, it's good to know the AR8161 is at least (somewhat) working! I'll continue to improve what code I can as well as keep an eye out for newer low-level Linux code to merge. Sadly the ALX driver this is based on isn't even part of the stock-standard Linux kernel at this point as far as I can tell, but is a patch upon a patch upon a patch for adding experimental but badly-needed driver support to distros and is placed in a sub-directory ominously called "crap".

[Anqa Singh]

Thank you, thank you thank you.

Confirming only one feature... AR8161 is recognized by the OSX 10.8.2.  I use Belkin FD7050 v3 for internet as I do not have ethernet connection where my hackintosh is. iCloud and Appp store started working after install of this ALXEthernet kext.

My system:
GA H77 D3H
Core i5 3570k (using HD4000 graphics), no overclock
8 Gigs DDR3 1600 hz
Belkin FD7050 v3
WD 750 G HD for OSX, WD 1.5 TB for Win and data
350 watt powersupply that came with the Antac case
Asus DVD-RW Dont recall which one, really old, works reading DVDs
Connected to Samsung tv through HDMI


So far, 1. No HDMI audio (just doing research, havnt tried many kexts yet.  2. I have to switch my monitor off and on once at start when the screen becomes garbled.
Not tested - USB3
Other than the above, no KPs, no hickups.  Been trying the build since two weeks so still newbe, have read a lot on these forums.  Built the system with the advise here and everywhere on the internet but missed out on v1.1 using AR8161 (Issues were mixed with some people reporting success and others reporting problems but no mention of the chipset and kext not being available).

Saw great progress during these two weeks in terms of the ethernet problem.  
App store access was essential to my build. This weekend trying to make Audio over HDMI work

Note: for some reason, this thread is really hard to find.  Is there a way this could be popularized?

Gracias.

[jjangsangy]

Finally! Thank you! The drivers work great on my Gigabyte GA-Z77X-D3H Rev 1.1

Installed on 10.8.2. After restart, OSX recognizes it!


Qualcomm Atheros AR8161 Gigabit Ethernet:

  Name: Qualcomm Atheros AR8161 Gigabit Ethernet
  Type: Ethernet Controller
  Bus: PCI
  Vendor ID: 0x1969
  Device ID: 0x1091
  Subsystem Vendor ID: 0x1458
  Subsystem ID: 0xe000
  Revision ID: 0x0010
  Link Width: x1
  BSD name: en1
  Kext name: ALXEthernet.kext
  Location: /System/Library/Extensions/ALXEthernet.kext
  Version: 1.0.1

[p.H]

Anqa Singh, on 07 November 2012 - 03:29 AM, said:

Thank you, thank you thank you.

Confirming only one feature... AR8161 is recognized by the OSX 10.8.2.  I use Belkin FD7050 v3 for internet as I do not have ethernet connection where my hackintosh is. iCloud and Appp store started working after install of this ALXEthernet kext.

My system:
GA H77 D3H
Core i5 3570k (using HD4000 graphics), no overclock
8 Gigs DDR3 1600 hz
Belkin FD7050 v3
WD 750 G HD for OSX, WD 1.5 TB for Win and data
350 watt powersupply that came with the Antac case
Asus DVD-RW Dont recall which one, really old, works reading DVDs
Connected to Samsung tv through HDMI


So far, 1. No HDMI audio (just doing research, havnt tried many kexts yet.  2. I have to switch my monitor off and on once at start when the screen becomes garbled.
Not tested - USB3
Other than the above, no KPs, no hickups.  Been trying the build since two weeks so still newbe, have read a lot on these forums.  Built the system with the advise here and everywhere on the internet but missed out on v1.1 using AR8161 (Issues were mixed with some people reporting success and others reporting problems but no mention of the chipset and kext not being available).

Saw great progress during these two weeks in terms of the ethernet problem.  
App store access was essential to my build. This weekend trying to make Audio over HDMI work

Note: for some reason, this thread is really hard to find.  Is there a way this could be popularized?

Gracias.

Maybe you can contact the moderators  

[kevinmscs]

Hi OP, please check the attachments as it seems both zip's are the same 1.0.0 version? Thanks

[Shailua]

kevinmscs, on 07 November 2012 - 06:37 PM, said:

Hi OP, please check the attachments as it seems both zip's are the same 1.0.0 version? Thanks

I'm not quite sure what you mean. The top post contains both 1.0.0 and 1.0.1 under the Downloads subsection. They are both different files.

[p.H]

Shailua, on 08 November 2012 - 03:39 AM, said:

I'm not quite sure what you mean. The top post contains both 1.0.0 and 1.0.1 under the Downloads subsection. They are both different files.

I think he means that the two files you uploaded in the post are exactly the same.

[Shailua]

Ah. Well they're definitely not the same files. The version number I assign can be confirmed with a right-click "Get Info" on the kext itself.

[p.H]

Shailua, on 08 November 2012 - 08:27 AM, said:

Ah. Well they're definitely not the same files. The version number I assign can be confirmed with a right-click "Get Info" on the kext itself.

I didn't test it cuz i have 8152 not 816X

[Rouge1]

Still working fine after two days.

Driver:ALXEthernet-1.0.1
MB: GA-Z77-DS3H v1.1
NIC: AR8161
OS: 10.8.2

[kevinmscs]

p.H, on 08 November 2012 - 04:41 AM, said:

I think he means that the two files you uploaded in the post are exactly the same.

Shailua, on 08 November 2012 - 08:27 AM, said:

Ah. Well they're definitely not the same files. The version number I assign can be confirmed with a right-click "Get Info" on the kext itself.

Never mind i got the 1.0.1 at last. For whatever reason i got all the 1.0.0 zip's at first. But i have not tested since i havent had time to build. All parts are lying at home for a week already :-) Will provide feedbacks once done. Thanks

[p.H]

kevinmscs, on 08 November 2012 - 08:02 PM, said:

Never mind i got the 1.0.1 at last. For whatever reason i got all the 1.0.0 zip's at first. But i have not tested since i havent had time to build. All parts are lying at home for a week already :-) Will provide feedbacks once done. Thanks

good luck to you

[bobstrike]

Chameleon in not able to load the drivers.
With Clover 2.0 works perfectly

3]Qualcomm Atheros AR8161 Gigabit Ethernet:

3]  Name: Qualcomm Atheros AR8161 Gigabit Ethernet

3]  Type: Ethernet Controller

3]  Bus: PCI

3]  Vendor ID: 0x1969

3]  Device ID: 0x1091

3]  Subsystem Vendor ID: 0x1043

3]  Subsystem ID: 0x1477

3]  Revision ID: 0x0008

3]  Link Width: x1

3]  BSD name: en0

3]  Kext name: ALXEthernet.kext

3]  Location: /System/Library/Extensions/ALXEthernet.kext

3]  Version: 1.0.1

Shailua Thank you very much for sharing !!!

[poyuzhe]

Hello, thanks for the driver! The first time I restart the computer after install the drive, the ethernet is working! However, subsequent restarts all result in kernal panic. I have attached screenshot. Please take a look. Thank!

I'm on 10.8.2, using the 1.01 version of the driver. My board is gigabyte h77 DS3H

Edit: looks like I can log into the system with boot ignore cache, but if not then kernel panic everytime.

Edit 2: due to some unknown reason I no longer experience kernel panic...I really don't know what happened. I just installed some app and nothing else. Thanks again for the great driver!

Attached Files

•  IMAG0173.jpg   123.01K   67 downloads

Edited by poyuzhe, 12 November 2012 - 04:20 AM.

[kevinmscs]

I am back to report that I've been using this driver version 1.0.1 without any problem with a Z77-DS3H. Installed following instructions from OP and rebooted. Working beautifully since. Thanks.

[Shailua]

poyuzhe, on 11 November 2012 - 08:43 AM, said:

Hello, thanks for the driver! The first time I restart the computer after install the drive, the ethernet is working! However, subsequent restarts all result in kernal panic. I have attached screenshot. Please take a look. Thank!

I'm on 10.8.2, using the 1.01 version of the driver. My board is gigabyte h77 DS3H

Edit: looks like I can log into the system with boot ignore cache, but if not then kernel panic everytime.

Edit 2: due to some unknown reason I no longer experience kernel panic...I really don't know what happened. I just installed some app and nothing else. Thanks again for the great driver!

Thank you for the great debug info! I'm glad it's all running fine now for you anyway, but to be sure I'll plug the panic values into the debugger and see what comes up just in case. It's possible that your kernel cache simply got corrupted. I've had that happen to me once or twice in the past. It might have to do with deleting the cache while the kextd daemon has partially rebuilt it already. I might alter my installation instructions to be less "aggressive", I guess you could say. Typically kextd just rescans stuff anyway as soon as it detects a change in /System/Library/Extensions. Manually deleting the cache seems to mostly only be needed from single user mode.

bobstrike, on 11 November 2012 - 03:41 AM, said:

Chameleon in not able to load the drivers.
With Clover 2.0 works perfectly

3]Qualcomm Atheros AR8161 Gigabit Ethernet:

3]  Name: Qualcomm Atheros AR8161 Gigabit Ethernet

3]  Type: Ethernet Controller

3]  Bus: PCI

3]  Vendor ID: 0x1969

3]  Device ID: 0x1091

3]  Subsystem Vendor ID: 0x1043

3]  Subsystem ID: 0x1477

3]  Revision ID: 0x0008

3]  Link Width: x1

3]  BSD name: en0

3]  Kext name: ALXEthernet.kext

3]  Location: /System/Library/Extensions/ALXEthernet.kext

3]  Version: 1.0.1

Shailua Thank you very much for sharing !!!

I'm not too sure what the issue would be with the bootloader, unless you're trying to install things outside of /System/Library/Extensions. I don't have any issues with (recent build) Chameleon myself. I've heard good things about Clover though, so if it works for you I say stick with it.

[poyuzhe]

Shailua,

Thanks for your reply! If those info can be of a little help then that's great. Today I experienced some strange freeze for my mac, I don't know for sure if it's the driver, but I suspect it may be related: whenever I try to upload my app build onto Apple's itunes connect through xcode, sooner or later during the uploading process the mac will freeze.

Thanks!

[djouija]

Shailua, you are a genius!

I haven't had time to test this out yet, but will be doing so shortly with my Atheros AR8161 Lan card in this Asus N56VM I have and will post my results!

Can't wait to test it out, actually gave up on running OSX on this laptop due to the Ethernet not being supported so this gives me new hope!

Now if I could only convince you to try and port over support for this Intel wireless card as well...