littlepapapump Posted July 15, 2011 Share Posted July 15, 2011 here's a new package I want you to try!!! Don't use anything else! Make sure u are on a fresh install. http://www.megaupload.com/?d=PJAFHLDW What definition are you using??? Hi Jeff, im not sure what you did but thank you so much, wireless is working perfect, keyboard and mouse kexts will have to be replaced as their not working, and I have to add the old batter kext, im happy with everything, osxfr33k thank you as well for the replies and sparky you to as well, after work i should be rolling, thanks again, should I just revert back to the keyboard and mouse kexts from your first page tutorial. Thanks again everyone Link to comment Share on other sites More sharing options...
sparkythewondersquid Posted July 15, 2011 Share Posted July 15, 2011 Hi Jeff, im not sure what you did but thank you so much, wireless is working perfect, keyboard and mouse kexts will have to be replaced as their not working, and I have to add the old batter kext, im happy with everything, osxfr33k thank you as well for the replies and sparky you to as well, after work i should be rolling, thanks again, should I just revert back to the keyboard and mouse kexts from your first page tutorial. Thanks again everyone http://www.kexts.com/view/1243-ps2_lion_kexts.html use these they work on mine should work on yours Link to comment Share on other sites More sharing options...
jeffc2009 Posted July 15, 2011 Author Share Posted July 15, 2011 Hi Jeff, im not sure what you did but thank you so much, wireless is working perfect, keyboard and mouse kexts will have to be replaced as their not working, and I have to add the old batter kext, im happy with everything, osxfr33k thank you as well for the replies and sparky you to as well, after work i should be rolling, thanks again, should I just revert back to the keyboard and mouse kexts from your first page tutorial. Thanks again everyone Glad to help!! Just hard to fix something that's not in front of me! Now just replace everything from my package except IO80211Family and see what happens. Link to comment Share on other sites More sharing options...
LinearBurn Posted July 17, 2011 Share Posted July 17, 2011 Just FYI Kernel cache inores the extra/extentions folder so if you plan to use kernel cache put it in S/L/E Link to comment Share on other sites More sharing options...
LinearBurn Posted July 17, 2011 Share Posted July 17, 2011 Also if your getting the bluetooth keyboard message turn it off in bluetooth prefferances Link to comment Share on other sites More sharing options...
LinearBurn Posted July 17, 2011 Share Posted July 17, 2011 Also if your getting the bluetooth keyboard message turn it off in bluetooth prefferances im also trying to fix the multicard reader but its not working as of yet one thing i didnt get working it voodobattery it causes a instant KP i dont know why Link to comment Share on other sites More sharing options...
jeffc2009 Posted July 18, 2011 Author Share Posted July 18, 2011 Just FYI Kernel cache inores the extra/extentions folder so if you plan to use kernel cache put it in S/L/E Those commands is for untouched Kernel, but for E/E cache use kext wizard in package. Link to comment Share on other sites More sharing options...
littlepapapump Posted July 18, 2011 Share Posted July 18, 2011 Hi Jeff, I installed parallels and it's giving me a virtualization error, it's turned on in my bios, any ideas? Also got os x running on that acer iconia w500 tablet I asked you about, thanks plourde Link to comment Share on other sites More sharing options...
LinearBurn Posted July 18, 2011 Share Posted July 18, 2011 im using a stock kernel Im mostly refering to usekernelcache=yes will bypass and kext in EE It stoped seeing my fakesmc so i had to put it in SLE Hi Jeff, I installed parallels and it's giving me a virtualization error, it's turned on in my bios, any ideas? Also got os x running on that acer iconia w500 tablet I asked you about, thanks plourde this may be due to what the bootloader injects at boot time and the fake mods we use to get osx working ... try vmware you may run in to the same problem Link to comment Share on other sites More sharing options...
jeffc2009 Posted July 18, 2011 Author Share Posted July 18, 2011 Hi Jeff, I installed parallels and it's giving me a virtualization error, it's turned on in my bios, any ideas? Also got os x running on that acer iconia w500 tablet I asked you about, thanks plourde You will need a launcher for Parallels desktop 6, until they update! Did you get with Nekas on iconia? Link to comment Share on other sites More sharing options...
sparkythewondersquid Posted July 19, 2011 Share Posted July 19, 2011 This is odd after running fine for several days my LIon GM install has all of a sudden become unstable it KP's and freezes strange Link to comment Share on other sites More sharing options...
jeffc2009 Posted July 19, 2011 Author Share Posted July 19, 2011 For multitouch use these in S/L/E and make sure to delete old voodoo/trackpad/ps2/controller/keyboard apple/ps2/acpips2. You will need to pay with setting in voodoops2 in system preferences to get it working right. Link to comment Share on other sites More sharing options...
LinearBurn Posted July 20, 2011 Share Posted July 20, 2011 Im posting a corrected DSDT thanks MaLd0n Fixes a lot of weird bugs and the no location defined wifi error use only with newer g73sw any other laptops have not been tested dsdt.LinearBurn.zip Link to comment Share on other sites More sharing options...
oSxFr33k Posted July 20, 2011 Share Posted July 20, 2011 Im posting a corrected DSDT thanks MaLd0n Fixes a lot of weird bugs and the no location defined wifi error use only with newer g73sw any other laptops have not been tested dsdt.LinearBurn.zip I am curious about a couple of the fixes. The Wifi looks goo but I am concerned about the Bus0 and OSI Darwin fixes: Left Side isJeffC2009 original MaLdons patch and right side the newest MaLd0n patch you attached: WIFI fix is for the Atheros is that the default Wifi card but looks fine: BUS0 fix looks weird: Not sure why there is address change for _OSI Darwin: Link to comment Share on other sites More sharing options...
MaLd0n Posted July 20, 2011 Share Posted July 20, 2011 BUS0 run on terminal paste here kextstat|grep SMBus OSI Darwin Apple DSDT Method (_INI, 0, NotSerialized) { Store (0x07D0, OSYS) If (CondRefOf (\_OSI, Local0)) { [b]If (_OSI ("Darwin")) { Store (0x2710, OSYS) }[/b] If (\_OSI ("Linux")) { Store (0x03E8, OSYS) } If (\_OSI ("Windows 2001")) { Store (0x07D1, OSYS) } If (\_OSI ("Windows 2001 SP1")) { Store (0x07D1, OSYS) } If (\_OSI ("Windows 2001 SP2")) { Store (0x07D2, OSYS) } If (\_OSI ("Windows 2006")) { Store (0x07D6, OSYS) } If (\_OSI ("Windows 2007")) { Store (0x07D7, OSYS) } If (\_OSI ("Windows 2008")) { Store (0x07D8, OSYS) } If (\_OSI ("Windows 2009")) { Store (0x07D9, OSYS) } } } post screenshot SystemInfo/Devices too Link to comment Share on other sites More sharing options...
dfris Posted July 20, 2011 Share Posted July 20, 2011 Downloading OSX LION as i type. Its not on the front page, but you can search for lion. heheheheh Link to comment Share on other sites More sharing options...
littlepapapump Posted July 20, 2011 Share Posted July 20, 2011 You will need a launcher for Parallels desktop 6, until they update! Did you get with Nekas on iconia? Hi Jeff, the loader worked well so thank you very much, as far as the acer iconia w500 i used nawcom mod usb and it worked well, qe ci is all I need help with, it's an amd hd 6250 Ati card, evoenabler registers it as an ati 4890,, everything works great I just need to get graphics working. Speaking of nawcom, it's pretty sad with what's going on with him and the medical issues. Link to comment Share on other sites More sharing options...
jeffc2009 Posted July 20, 2011 Author Share Posted July 20, 2011 run on terminalpaste here kextstat|grep SMBus Apple DSDT Method (_INI, 0, NotSerialized) { Store (0x07D0, OSYS) If (CondRefOf (\_OSI, Local0)) { [b]If (_OSI ("Darwin")) { Store (0x2710, OSYS) }[/b] If (\_OSI ("Linux")) { Store (0x03E8, OSYS) } If (\_OSI ("Windows 2001")) { Store (0x07D1, OSYS) } If (\_OSI ("Windows 2001 SP1")) { Store (0x07D1, OSYS) } If (\_OSI ("Windows 2001 SP2")) { Store (0x07D2, OSYS) } If (\_OSI ("Windows 2006")) { Store (0x07D6, OSYS) } If (\_OSI ("Windows 2007")) { Store (0x07D7, OSYS) } If (\_OSI ("Windows 2008")) { Store (0x07D8, OSYS) } If (\_OSI ("Windows 2009")) { Store (0x07D9, OSYS) } } } post screenshot SystemInfo/Devices too MaLd0n, thanks for your help again!!! New dsdt works great without any kp. But I am still getting no locale JCs-Mac-Pro:~ JC$ kextstat|grep SMBus 22 2 0xffffff7f8084f000 0x4000 0x4000 com.apple.iokit.IOSMBusFamily (1.1) <5 4 3> 72 0 0xffffff7f813d7000 0x3000 0x3000 com.apple.driver.AppleSMBusPCI (1.0.10d0) <9 5 4 3> 85 0 0xffffff7f81720000 0xe000 0xe000 com.apple.driver.AppleSMBusController (1.0.10d0) <22 9 8 5 4 3> JCs-Mac-Pro:~ JC$ Link to comment Share on other sites More sharing options...
LatinMcG Posted July 20, 2011 Share Posted July 20, 2011 MaLd0n, thanks for your help again!!! New dsdt works great without any kp. But I am still getting no locale JCs-Mac-Pro:~ JC$ kextstat|grep SMBus 22 2 0xffffff7f8084f000 0x4000 0x4000 com.apple.iokit.IOSMBusFamily (1.1) <5 4 3> 72 0 0xffffff7f813d7000 0x3000 0x3000 com.apple.driver.AppleSMBusPCI (1.0.10d0) <9 5 4 3> 85 0 0xffffff7f81720000 0xe000 0xe000 com.apple.driver.AppleSMBusController (1.0.10d0) <22 9 8 5 4 3> JCs-Mac-Pro:~ JC$ AR9285 FIX has a devicemergenub to fix that by andy vand I am curious about a couple of the fixes. The Wifi looks goo but I am concerned about the Bus0 and OSI Darwin fixes: Left Side isJeffC2009 original MaLdons patch and right side the newest MaLd0n patch you attached: WIFI fix is for the Atheros is that the default Wifi card but looks fine: BUS0 fix looks weird: Not sure why there is address change for _OSI Darwin: the unicode * means whoever was building the dsdt had atheros 2A device in the pc . so it says "hey * since its there already" darwin code if Lequal Greater osid 07d6 it enables other features. in your dell laptop set osid to make it think its vista 07d6 for Darwin then run screen display of brightness level. when changing it fn ^ or fn Down. but if the number is greater then it doesnt show the lil sun graphics. but if its 0x7d6 it shows on screen ( and what else would it enable ? power management ?) EDIT: bus0 .. its no need to add device id for mac pro ich10 if id of mobo is supported Link to comment Share on other sites More sharing options...
dfris Posted July 20, 2011 Share Posted July 20, 2011 got lion downloaded, Are there any way to install this with out a usb drive, iv got the lion.dmg to a dvd. but can i use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to install? Or am i going to have to get a 8mb flash stick? Link to comment Share on other sites More sharing options...
MaLd0n Posted July 20, 2011 Share Posted July 20, 2011 MaLd0n JCs-Mac-Pro:~ JC$ kextstat|grep SMBus 22 2 0xffffff7f8084f000 0x4000 0x4000 com.apple.iokit.IOSMBusFamily (1.1) <5 4 3> 72 0 0xffffff7f813d7000 0x3000 0x3000 com.apple.driver.AppleSMBusPCI (1.0.10d0) <9 5 4 3> 85 0 0xffffff7f81720000 0xe000 0xe000 com.apple.driver.AppleSMBusController (1.0.10d0) <22 9 8 5 4 3> JCs-Mac-Pro:~ JC$ ... look at the "o rei" DSDT and Apple DSDT If (_OSI ("Darwin")) { Store (0x2710, OSYS) } but I remove all and no difference pure heresy Link to comment Share on other sites More sharing options...
dfris Posted July 20, 2011 Share Posted July 20, 2011 srry didn't read post correctly. Fixed Link to comment Share on other sites More sharing options...
dfris Posted July 21, 2011 Share Posted July 21, 2011 Guys i need some help, installing this freakin thing. I got my usb working, and i can install Lion, but what do i do from there? do i follow the instructions on the usb creation page all the way, then use Jeffs folders? I have installed Lion, then copied jeffs extra folder, and used kext utility to install the kexts in the s/l/e folder of jeffs, but it want boot, with out the usb stick, and it gives a KP on boot, something to do with the ACPI and voodoohda the best i can tell, I know I'm missing something, a little help please. thanks Daryl Link to comment Share on other sites More sharing options...
oSxFr33k Posted July 21, 2011 Share Posted July 21, 2011 @MaLd0n, I have the G74SX which is supposedly the the Motherboard but just in case here is the DSDT both vanilla and the one you fixed for me a while back. Last login: Wed Jul 20 20:11:26 on console osxfr33ks-MacBook-Pro:~ osxfr33k$ kextstat|grep SMBus 24 2 0xffffff7f8085b000 0x4000 0x4000 com.apple.iokit.IOSMBusFamily (1.1) <5 4 3> 75 0 0xffffff7f815a3000 0x3000 0x3000 com.apple.driver.AppleSMBusPCI (1.0.10d0) <9 5 4 3> 87 0 0xffffff7f81744000 0xe000 0xe000 com.apple.driver.AppleSMBusController (1.0.10d0) <24 9 8 5 4 3> osxfr33ks-MacBook-Pro:~ osxfr33k$ I am using the Dell 1510 wireless which works natively so no need for DSDT edit for this but can you check to make sure I have the latest update the OSI Darwin and BUS0 mods? I have not noticed and kernel panics. Here are the DSDTs unpatched and patched: Asus_G74SX_VANILLA_DSDT.dsl.zip Asus_G74SX_Patched_by_MaLd0n.dsl.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted July 21, 2011 Share Posted July 21, 2011 ... dsdt.oSxFr33k.zip into_all all code_regex _T_0 replaceall_matched begin T_0 end; into_all all code_regex _T_1 replaceall_matched begin T_1 end; into_all all code_regex _T_2 replaceall_matched begin T_2 end; into_all all code_regex _T_3 replaceall_matched begin T_3 end; into_all all code_regex _T_4 replaceall_matched begin T_4 end; into_all all code_regex _T_5 replaceall_matched begin T_5 end; into_all all code_regex _T_6 replaceall_matched begin T_6 end; into method label _DSM parent_label \_SB.PCI0.PEG0.GFX0 code_regex Return\s\(\s*\n?\s*Package\s*\n?\s*\(0x02\)\s*\n?\s*\{\s*\n?(?:\s*Zero,?\s*\n?){2}\s*\}\s*\n?\s*\) remove_matched; into method label _DSM parent_label \_SB.PCI0.PEG0.GFX0 insert begin Return (Package (0x02)\n {\n Zero, \n Zero\n }) end; into method label DTGP remove_entry; into definitionblock code_regex . insert begin Method (DTGP, 5, NotSerialized)\n {\n If (LEqual (Arg0, Buffer (0x10)\n {\n /* 0000 */ 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44, \n /* 0008 */ 0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B\n }))\n {\n If (LEqual (Arg1, One))\n {\n If (LEqual (Arg2, Zero))\n {\n Store (Buffer (One)\n {\n 0x03\n }, Arg4)\n Return (One)\n }\n If (LEqual (Arg2, One))\n {\n Return (One)\n }\n }\n }\n Store (Buffer (One)\n {\n 0x00\n }, Arg4)\n Return (Zero)\n } end; into method label _DSM parent_adr 0x001D0000 remove_entry; into device name_adr 0x001D0000 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package ()\n {\n "device-id", \n Buffer (0x04)\n {\n 0x26, 0x1c, 0x00, 0x00\n }, \n "built-in", \n Buffer (One)\n {\n 0x00\n }, \n "AAPL,clock-id", \n Buffer (One)\n {\n 0x01\n }, \n "device_type", \n Buffer (0x05)\n {\n "EHCI"\n }, \n "AAPL,current-available", \n 0x0834, \n "AAPL,current-extra", \n 0x0898, \n "AAPL,current-extra-in-sleep", \n 0x0640, \n "AAPL,device-internal",\n 0x02,\n "AAPL,max-port-current-in-sleep",\n 0x834, \n Buffer (One)\n {\n 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _DSM parent_adr 0x001A0000 remove_entry; into device name_adr 0x001A0000 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package ()\n {\n "device-id", \n Buffer (0x04)\n {\n 0x26, 0x1c, 0x00, 0x00\n }, \n "built-in", \n Buffer (One)\n {\n 0x00\n }, \n "AAPL,clock-id", \n Buffer (One)\n {\n 0x02\n }, \n "device_type", \n Buffer (0x05)\n {\n "EHCI"\n }, \n "AAPL,current-available", \n 0x0834, \n "AAPL,current-extra", \n 0x0898, \n "AAPL,current-extra-in-sleep", \n 0x0640, \n "AAPL,device-internal",\n 0x02,\n "AAPL,max-port-current-in-sleep",\n 0x834, \n Buffer (One)\n {\n 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into device name_hid PNP0303 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "AAPL,has-embedded-fn-keys", \n Buffer (0x04)\n {\n 0x01, 0x00, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n }\n end; into method label GLCS code_regex Return\s\(Zero\) remove_matched; into method label GLCS insert begin Return (Zero) end; into device label HDEF insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x04)\n {\n "layout-id", \n Buffer (0x04)\n {\n 0x0C, 0x00, 0x00, 0x00\n }, \n "PinConfigurations", \n Buffer (Zero) {}\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _STA parent_hid PNP0103 remove_entry; into device name_hid PNP0103 insert begin Method (_STA, 0, NotSerialized)\n {\n Return (0x0F)\n } end; into device name_hid PNP0000 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched; into device name_hid PNP0100 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched; into device name_hid PNP0B00 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched; into device name_hid PNP0103 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} removeall_matched; into device name_hid PNP0103 code_regex Name\s\(([^,]+),\sResourceTemplate\s\(\)\n\s+\{((?:.|\n)*)\}\) replace_matched begin Name (%1, ResourceTemplate ()\n {\n IRQNoFlags ()\n {0}\n IRQNoFlags ()\n {8}\n IRQNoFlags ()\n {11}\n IRQNoFlags ()\n {15}\n %2 }) end; into method label _DSM parent_adr 0x001F0000 remove_entry; into device name_adr 0x001F0000 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "device-id", \n Buffer (0x04)\n {\n 0x49, 0x1C, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into_all all code_regex (Acquire\s\(MUT0,\s0x)....\) replace_matched begin %1FFFF) end; into_all all code_regex (Acquire\s\(MUTE,\s0x)....\) replace_matched begin %1FFFF) end; into scope label \_SB insert begin Device (PNLF)\n {\n Name (_HID, EisaId ("APP0002"))\n Name (_CID, "backlight")\n Name (_UID, 0x0A)\n Name (_STA, 0x0B)\n } end; into device name_hid PNP0B00 code_regex (IO\s\((?:\s*[^,]+,\s*(?:\/\/\s.*)?\s*\n)+\s*)(\dx\d+)(,\s*(?:\/\/\s.*)?\s*\n\s*\)) replace_matched begin %10x02%3 end; into method label _PTS code_regex_not If\s\(LEqual\s\(Arg0,\s0x05\)\) code_regex ^((?:.|\n)*)$ replace_matched begin If (LEqual (Arg0, 0x05)) {}\n Else\n {\n %1 } end; into method label SMAT code_regex Return\s\(Zero\) remove_matched; into method label SMAT insert begin Return (Zero) end; into method label _DSM parent_adr 0x001D0001 remove_entry; into device name_adr 0x001D0001 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "device-id", \n Buffer (0x04)\n {\n 0x27, 0x1c, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _DSM parent_adr 0x001D0002 remove_entry; into device name_adr 0x001D0002 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "device-id", \n Buffer (0x04)\n {\n 0x2c, 0x1c, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _DSM parent_adr 0x001D0003 remove_entry; into device name_adr 0x001D0003 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "device-id", \n Buffer (0x04)\n {\n 0x27, 0x1c, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _DSM parent_adr 0x001D0004 remove_entry; into device name_adr 0x001D0004 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "device-id", \n Buffer (0x04)\n {\n 0x2c, 0x1c, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _DSM parent_adr 0x001A0001 remove_entry; into device name_adr 0x001A0001 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "device-id", \n Buffer (0x04)\n {\n 0x27, 0x1c, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _DSM parent_adr 0x001A0002 remove_entry; into device name_adr 0x001A0002 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "device-id", \n Buffer (0x04)\n {\n 0x2c, 0x1c, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _DSM parent_adr 0x001A0003 remove_entry; into device name_adr 0x001A0003 insert begin Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "device-id", \n Buffer (0x04)\n {\n 0x27, 0x1c, 0x00, 0x00\n }\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n } end; into method label _DSM parent_adr 0x001F0003 remove_entry; into device name_adr 0x001F0003 insert begin Device (BUS0)\n {\n Name (_CID, "smbus")\n Name (_ADR, Zero)\n Device (DVL0)\n {\n Name (_ADR, 0x57)\n Name (_CID, "diagsvault")\n Method (_DSM, 4, NotSerialized)\n {\n Store (Package (0x02)\n {\n "address", \n 0x57\n }, Local0)\n DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n Return (Local0)\n }\n }\n } end; into method label _INI parent_label _SB.PCI0 insert begin If (_OSI ("Darwin"))\n {\n Store (0x2710, OSYS)\n } end; into method label _INI parent_label \_SB.PCI0 insert begin If (_OSI ("Darwin"))\n {\n Store (0x2710, OSYS)\n } end; into method label _INI parent_label _SB insert begin If (_OSI ("Darwin"))\n {\n Store (0x2710, OSYS)\n } end; into method label _INI parent_label \_SB insert begin If (_OSI ("Darwin"))\n {\n Store (0x2710, OSYS)\n } end; into method label _INI parent_label PCI0 insert begin If (_OSI ("Darwin"))\n {\n Store (0x2710, OSYS)\n } end Link to comment Share on other sites More sharing options...
Recommended Posts