158 replies to this topic

[LifeOnRice]

white_apple_x86, on Mar 2 2011, 12:46 PM, said:

me too

lets do some research, there might be a enabler after sleep for out graphics series

[ lauch]

okay...
today i have bought an ASUS EAH5450 SILENT (ATI RadeonHD 5450 "Cedar") graphics card. (1GB DDR3). i was looking for a working kext, and then i saw this thread. i have done your instructions. installed bootloader from your zip, installed kexts and rom. repaired permissions with osx86tools and edited the com.apple.boot.plist.
then i restarted my computer. i knew, that that gives a kernel panic. (i have SL 10.6.6, legacy_kernel).
my reason to get this card working:
i installed hfs+ for windows (trial), edited the com.apple.boot.plist again (i'll post it later) rebootet and look there - IT WORKS. with 1600x900 (my monitor's default)
i wanted to benchmark my system, so i started geekbench, but it doesn't work anymore, i don't know the reason.
then i tested xbench (works) and the results are much better than with onboard gma950.

in fact, i have installed the kexts, the rom and the bootloader, and the system starts with this com.apple.boot.plist:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Kernel</key>
    <string>legacy_kernel</string>
    <key>Kernel Flags</key>
    <string>arch=i386</string>
    <key>Graphics Mode</key>
    <string>1600x900x32</string>
    <key>Theme</key>
    <string>Default</string>
    <key>Timeout</key>
    <string>5</string>
</dict>
</plist>

Have Luck!

According to this website QE/CI should be enabled...
and sorry for my bad englisch, i did not learn very much at school... lol

---

EDIT:
i didn't install the graphics update.

here are some screenshots...

[ankh_red]

so..
to get QE/CI working we needto update to 10.6.4+gfx update
and 10.6.6 (this should include gfx update from 10.6.4).

for ppllike me with SLOW connection i cant stand to download >1gb file.
so my point is.. if there is anyone who kind enaugh to upload their KEXTS (X300plugin.bundle,GA,GL..forgot the name) from 10.6.4+gfx / 10.6.6 we really appreciate that it willbe a BIG HELP to us.
thanks.

[yukistvn]

ankh_red, on Mar 5 2011, 03:50 AM, said:

so..
to get QE/CI working we needto update to 10.6.4+gfx update
and 10.6.6 (this should include gfx update from 10.6.4).

for ppllike me with SLOW connection i cant stand to download >1gb file.
so my point is.. if there is anyone who kind enaugh to upload their KEXTS (X300plugin.bundle,GA,GL..forgot the name) from 10.6.4+gfx / 10.6.6 we really appreciate that it willbe a BIG HELP to us.
thanks.

here u are, friend!

Attached Files

•  X3000KEXT.zip   5.3MB   134 downloads

[yukistvn]

Jerry_MK2, on Feb 22 2011, 08:12 PM, said:

Maybe I made one step forward, but still no acceleration for this card.

After installing mac os x 10.6.4 update, my ASUS EAH5450 was working but without acceleration. Only 1 resolution, the one I inserted in com.apple.Boot.plist. No resolution change possible.

After installing mac os x 10.6.6 update, I got black screen before entering the desktop, even using UseAtiROM option with 1002_68f9.rom in EXTRA folder.

So, I replaced the ati drivers in S/L/E with the drivers downloaded from this post:

http://www.insanelym...howtopic=224063

and now no more black screen. I can see my desktop. My card is working exactly like before 10.6.6 update. But acceleration and resolution change are still not working.
I also added device id in Ati5000controller.kext, but still no acceleration and resolution change.

What else must I do for having acceleration and resolution change?

p.s. during boot in verbose mode (-v), I noticed that at some point it says:

not loaded kext com.apple.Ati5000controller.kext - file not found................

but that file is present in S/L/E

I have same Asus EAH 5450 silent 1Gb as you, and i did it, i recommend you these things:
1- re install OS and update directly to 10.6.6 ( as my case , i have Iatkatos S3 v2 DVD , and a combo update to 10.6.6)
2- these file you have to make sure in following directories:
1002_68f9.rom -> extra
Ati 5000injector -> extra\extentions
Aty_init.kext -> system\library\extentions
Atiframbuffer.kext -> system\library\extentions
AtiRadeonX3000.kext (have a group of this file : GA , GLD..)-> system\library\extentions
Ati5000Controller.kext ->system\library\extentions

(have to make sure that you have repair permission)

in the com.apple.Boot list have key Flags same as White_apple mention at first topic
You will have fully QE/CI after reboot!
But this method we only have 1 monitor at DVI port, the other VGA port where monitor get black screen.
some notes for you, and be patient when you work arround, and do not remember have a solution backup your OS for getting restore system if you get Kernel Panic and dont known the way to resolve it !

[Tortoise]

It works on legacy kernel?

anyone tried?

I'm building a HTPC with Mac OS X, and i'm going to use a GPU with low power consumption, I'm in doubt between Radeon 4550 and 5450, which one is more compatible with Hackintosh?

[terranova2142]

Tortoise, on Mar 7 2011, 05:20 PM, said:

It works on legacy kernel?

anyone tried?

I'm building a HTPC with Mac OS X, and i'm going to use a GPU with low power consumption, I'm in doubt between Radeon 4550 and 5450, which one is more compatible with Hackintosh?

recommend 4550

[Tortoise]

white_apple_x86,

Do you recommend based on compatibility?

Beacuse according to this table:

http://en.wikipedia...._4xxx.29_series

4550 has a max TDP of 25W against 19.1W from 5450. And the radeon 5450 wins all specifications.

Where i can find a 4550 HOW TO?

Thanks.

[yazz3d]

yukistvn, on Mar 5 2011, 03:31 PM, said:

I have same Asus EAH 5450 silent 1Gb as you, and i did it, i recommend you these things:
1- re install OS and update directly to 10.6.6 ( as my case , i have Iatkatos S3 v2 DVD , and a combo update to 10.6.6)
2- these file you have to make sure in following directories:
1002_68f9.rom -> extra
Ati 5000injector -> extra\extentions
Aty_init.kext -> system\library\extentions
Atiframbuffer.kext -> system\library\extentions
AtiRadeonX3000.kext (have a group of this file : GA , GLD..)-> system\library\extentions
Ati5000Controller.kext ->system\library\extentions

(have to make sure that you have repair permission)

in the com.apple.Boot list have key Flags same as White_apple mention at first topic
You will have fully QE/CI after reboot!
But this method we only have 1 monitor at DVI port, the other VGA port where monitor get black screen.
some notes for you, and be patient when you work arround, and do not remember have a solution backup your OS for getting restore system if you get Kernel Panic and dont known the way to resolve it !

I have the same problem as yukistvn...

I did everything like you said without success. I have the same bootplist as white apple´s, and I tried different convinations (with and without AtiFb Hoolock and Uakari, with and without Graphics Enabler, and different default resolutions...) and nothing happend.

I have all those kexts in S/L/E and Ati5000injector in extra, extensions folder. After all I repaired permissions with osx86 tools.

Could you show me your bootplist? Did you use the white apple´s rom?
(I tried white apples´s rom and I did one with windows method without success).  

[yukistvn]

this i my actual Plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel Flags</key>
<string>arch=i386</string
<key>dsdt</key>
<string>hd(0,2)/Extra/dsdt.aml</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>UseAtiROM</key>
<string>Yes</string>
<key>AtiFb</key>
<string>Hoolock</string>
        <key>Timeout</key>
        <string>30</string>
</dict>
</plist>

Depend on your configuration, u have to active two key:  AtiFb and Graphic Enabler.

you should try the other way at topic [testing] ati 5xxx and 4xxx , by using the boot file, it working fine too ( have to read carefully before you change boot file)

[yukistvn]

lauch1511, on Mar 4 2011, 05:54 PM, said:

okay...
today i have bought an ASUS EAH5450 SILENT (ATI RadeonHD 5450 "Cedar") graphics card. (1GB DDR3). i was looking for a working kext, and then i saw this thread. i have done your instructions. installed bootloader from your zip, installed kexts and rom. repaired permissions with osx86tools and edited the com.apple.boot.plist.
then i restarted my computer. i knew, that that gives a kernel panic. (i have SL 10.6.6, legacy_kernel).
my reason to get this card working:
i installed hfs+ for windows (trial), edited the com.apple.boot.plist again (i'll post it later) rebootet and look there - IT WORKS. with 1600x900 (my monitor's default)
i wanted to benchmark my system, so i started geekbench, but it doesn't work anymore, i don't know the reason.
then i tested xbench (works) and the results are much better than with onboard gma950.

in fact, i have installed the kexts, the rom and the bootloader, and the system starts with this com.apple.boot.plist:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Kernel</key>
    <string>legacy_kernel</string>
    <key>Kernel Flags</key>
    <string>arch=i386</string>
    <key>Graphics Mode</key>
    <string>1600x900x32</string>
    <key>Theme</key>
    <string>Default</string>
    <key>Timeout</key>
    <string>5</string>
</dict>
</plist>

Have Luck!

According to this website QE/CI should be enabled...
and sorry for my bad englisch, i did not learn very much at school... lol

---

EDIT:
i didn't install the graphics update.

here are some screenshots...

hi Launch1511,
do you ever try using both monitor , i mean DVI + VGA, mine VGA card is asu EAH 5450 which only DVI port woking !

[tdtran1025]

This is much simpler than you think. I spent 3 days experimenting everything in this post to no success, until I accidentally stumbled upon this.
Please read the attached guide inside the ZIP file.
I hope it will be clear in the end.

Attached Files

•  Archive.zip   3.28MB   587 downloads

[yukistvn]

tdtran1025, on Mar 19 2011, 12:11 AM, said:

This is much simpler than you think. I spent 3 days experimenting everything in this post to no success, until I accidentally stumbled upon this.
Please read the attached guide inside the ZIP file.
I hope it will be clear in the end.

hi tdtran1025, have you ever try using VGA port on Asus 5450? , my card working DVI port only !

[nicktones]

@tdtran1025

You are a legend!  Got my ati 5450 working in snow leopard with your stuff. cheers mate

[ankh_red]

is that from the new macbook proS? or Lion kexts?

[taky2008]

I've get it work By some lion kexts NOw i can change the reslution but Qe/Cl Doesnt work any Help ??? My Card Is Ati HD 5450 And I Doesnt Have Any Kext Except The system kext

[terranova2142]

Tortoise, on Mar 8 2011, 08:16 PM, said:

white_apple_x86,

Do you recommend based on compatibility?

Beacuse according to this table:

http://en.wikipedia...._4xxx.29_series

4550 has a max TDP of 25W against 19.1W from 5450. And the radeon 5450 wins all specifications.

Where i can find a 4550 HOW TO?

Thanks.

I don't know,how i can find 4550 for you but the 5450 hard to install

[yukistvn]

I finnally have both monitors working via DVI + VGA port , by using the boot file attached.

this boot from atka , link here: http://www.insanelym...p...0&start=660
thanks atka

Attached Files

•  boot.zip   192.29K   95 downloads
•  2monitors.tiff   1.76MB   85 downloads

[yazz3d]

tdtran1025, on Mar 19 2011, 12:11 AM, said:

This is much simpler than you think. I spent 3 days experimenting everything in this post to no success, until I accidentally stumbled upon this.
Please read the attached guide inside the ZIP file.
I hope it will be clear in the end.

EUREKA!!!! It worked! For me, this solution is simple, astonishing, amazing and elegant.
Thank you so much tdtran1025. You are the man!!!!

And also thanks to all the people who had been working on a solution to this issue

[PGHammer]

ankh_red, on Mar 4 2011, 09:50 PM, said:

so..
to get QE/CI working we needto update to 10.6.4+gfx update
and 10.6.6 (this should include gfx update from 10.6.4).

for ppllike me with SLOW connection i cant stand to download >1gb file.
so my point is.. if there is anyone who kind enaugh to upload their KEXTS (X300plugin.bundle,GA,GL..forgot the name) from 10.6.4+gfx / 10.6.6 we really appreciate that it willbe a BIG HELP to us.
thanks.

If starting from pre-10.6.4, after installing this, just go directly to the 10.6.6 (or now 10.6.7) Combo Update (as the Graphics Update for 10.6.4 is included in the CU).

You can't download this update in the background because your connection is *that slow*?