LifeOnRice Posted February 24, 2011 Share Posted February 24, 2011 Hi, how can i fix the kernel panic after installing Snow Leopard Graphics update? i get a kernel panic and cannot boot from safe mode. thanks white_apple_x86 Quote Link to comment Share on other sites More sharing options...
lilsully4 Posted February 24, 2011 Share Posted February 24, 2011 Do you think this will work with the 5470? Quote Link to comment Share on other sites More sharing options...
bas123 Posted February 24, 2011 Share Posted February 24, 2011 may me you must delete the x3000 and the ati5000 controller kext. i had the the problem with a black display. aber deleting the files the the graphic output worked. you do boot from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]? did install fakesmc.kext? You have to always delete that kexts Quote Link to comment Share on other sites More sharing options...
bas123 Posted February 24, 2011 Share Posted February 24, 2011 Hi, how can i fix the kernel panic after installing Snow Leopard Graphics update? i get a kernel panic and cannot boot from safe mode. thanks white_apple_x86 You have to boot in windows and use transmac or similar to remove them. Quote Link to comment Share on other sites More sharing options...
LifeOnRice Posted February 25, 2011 Share Posted February 25, 2011 I followed again the guide step by step. After installed mac os x 10.6.6 update and (without rebooting) installed IOUSBRollback, after reboot I have black screen just before entering the desktop. I think it's not a kernel panic, because I can hear the hard disk continue loading. How can I fix the black screen problem? me too i got a black screen after rebooting can anyone help us? white_apple_x86? bas123?? thanks Quote Link to comment Share on other sites More sharing options...
rubenmr Posted February 25, 2011 Share Posted February 25, 2011 I have a problem. I installed osx retail 10.6 with EFI Empire. Install HD500Inject, ati kexts and modify my boot.plist Updated to 10.6.6 If i load OSX with EFI Empire CD, it loads ok, ATI works perfectly, resolutions QE... But, when i load without CD, i have this screen, everything loads ok, nothing KP I have same boot (chameleon v2 rc3 pcefi_10.4), kexts in extra folder & kernel (mach_kernel.test7) than EFI Empire CD. What can i do??? (Sorry for my english) Quote Link to comment Share on other sites More sharing options...
taky2008 Posted February 25, 2011 Share Posted February 25, 2011 I do All the steps but i sciked update steps cuz i'm allready have 10.6.6 but after all when i restart the screen Doent work only mixed colors with non meaning pla help me am using Hazard 10.6.6 Quote Link to comment Share on other sites More sharing options...
bas123 Posted February 25, 2011 Share Posted February 25, 2011 me too i got a black screen after rebooting can anyone help us? white_apple_x86? bas123?? thanks I don't know a solution, but what connection do you use. (ge.: hdmi, vga, dvi,...) because i use a laptop and that uses an internal connection. I can't use any screen trough hdmi or vga. Quote Link to comment Share on other sites More sharing options...
Selby Posted February 25, 2011 Share Posted February 25, 2011 I followed again the guide step by step. After installed mac os x 10.6.6 update and (without rebooting) installed IOUSBRollback, after reboot I have black screen just before entering the desktop. I think it's not a kernel panic, because I can hear the hard disk continue loading. How can I fix the black screen problem? I had the same issue, sounded like the system was still running but nothing was showing on the screen. Solved the problem by simply using the DVI output from my graphics card rather than the vga. Hope this solves the problem for you. Quote Link to comment Share on other sites More sharing options...
LifeOnRice Posted February 25, 2011 Share Posted February 25, 2011 i currently have a VGA(currently using), a DVI, and Display Port? which one would work? EDIT: i tried DVI, i get a black screen Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted February 26, 2011 Author Share Posted February 26, 2011 I have a problem. I installed osx retail 10.6 with EFI Empire. Install HD500Inject, ati kexts and modify my boot.plist Updated to 10.6.6 If i load OSX with EFI Empire CD, it loads ok, ATI works perfectly, resolutions QE... But, when i load without CD, i have this screen, everything loads ok, nothing KP I have same boot (chameleon v2 rc3 pcefi_10.4), kexts in extra folder & kernel (mach_kernel.test7) than EFI Empire CD. What can i do??? (Sorry for my english) what in your folder extra/extensions and com.boot.plist Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted February 26, 2011 Author Share Posted February 26, 2011 Hi, how can i fix the kernel panic after installing Snow Leopard Graphics update? i get a kernel panic and cannot boot from safe mode. thanks white_apple_x86 download macdriver8 or paragon hfs+ to access HFS+ partition and remove ati3000.kext Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted February 26, 2011 Author Share Posted February 26, 2011 hi white_applei have succesful got my ATI 5450 work, but QL/CI it's not enable , can you help me out! thanks you set atifb=hoolock and enable quartzGL in osx86tool,i tried with Uakari i lost signal after rebooted Quote Link to comment Share on other sites More sharing options...
terranova2142 Posted February 26, 2011 Author Share Posted February 26, 2011 Do you think this will work with the 5470? yes your device is 68f9,atix3000.kext support it i currently have a VGA(currently using), a DVI, and Display Port? which one would work? EDIT: i tried DVI, i get a black screen i use only dvi and good work Quote Link to comment Share on other sites More sharing options...
Dellmantt Posted February 26, 2011 Share Posted February 26, 2011 you set atifb=hoolock and enable quartzGL in osx86tool,i tried with Uakari i lost signal after rebooted quartzGL is not QL/CI http://www.insanelymac.com/forum/index.php?showtopic=238739 Quote Link to comment Share on other sites More sharing options...
taky2008 Posted February 26, 2011 Share Posted February 26, 2011 i've already 10.6.6 by HAzard I downloaded all in on and installed the bootloader then i installed the kexts then i reared the premisions the i edited the boot plist then i restarted and i get black screen with mine white and red lines but i'm hearing the sounds of the system This is the screen http://www.mypicx.com/uploadimg/1338941059_02262011_1.jpg Quote Link to comment Share on other sites More sharing options...
knoma Posted February 26, 2011 Share Posted February 26, 2011 hi all, after installling all the steps i get following messages in my kernel.log Feb 26 10:20:20 localhost kernel[0]: Not loading kext com.apple.kext.ATI5000Controller - not found and kextd not available in early boot. Feb 26 10:21:19 knomas-Mac-Pro kernel[0]: ATY_Init: Starting Feb 26 10:21:19 knomas-Mac-Pro kernel[0]: ATY_Init: Card 0x68f9 was not posted Feb 26 10:21:19 knomas-Mac-Pro kernel[0]: ATY_Init: devid from binimage: 68f9 Feb 26 10:21:19 knomas-Mac-Pro kernel[0]: DSMOS has arrived Feb 26 10:21:24 knomas-Mac-Pro kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out Feb 26 10:21:25 knomas-Mac-Pro kernel[0]: ATY_Init: Starting Feb 26 10:21:25 knomas-Mac-Pro kernel[0]: ATY_Init: The 68f9 card already has keys set Feb 26 10:21:25 knomas-Mac-Pro kernel[0]: ATY,Uakari: Not usable but the graphic dont work proprebly. only one resultion. after installing the update for 10.6.6 i deleted the x3000 and the x5000controller. when i reinstall the x5000 i get a black screen. i have a sapphire 5450. i iuse the dvi and the vga - connector. please can somebody post his log at startup. thanks for you help Quote Link to comment Share on other sites More sharing options...
Piellekes Posted February 26, 2011 Share Posted February 26, 2011 will there be more support in the new 10.6.6 built for the new macbook pro's? I have a HD6970 and it is fairly possible it will be supported Quote Link to comment Share on other sites More sharing options...
rubenmr Posted February 26, 2011 Share Posted February 26, 2011 I did it. All graphics functions with AMD x64 without Empire EFI Cd. Bootloader: Chameleon v2 RC3 PCEFI 10.4 (same as CD) Kernel: mach_kernel.test7 ATIinjector, ATY_Init & ATIFramebuffer instaled. Rom in \Extra. On boot.plist nothing change. No AtiFB, no Graphics enabler ... Works on Snow Leopard retail 10.6.6, resolutions, QE enabled.... I connect it with HDMI. But i havent sound with it. Bye. Quote Link to comment Share on other sites More sharing options...
taky2008 Posted February 26, 2011 Share Posted February 26, 2011 I did it. All graphics functions with AMD x64 without Empire EFI Cd. Bootloader: Chameleon v2 RC3 PCEFI 10.4 (same as CD) Kernel: mach_kernel.test7 ATIinjector, ATY_Init & ATIFramebuffer instaled. Rom in \Extra. On boot.plist nothing change. No AtiFB, no Graphics enabler ... Works on Snow Leopard retail 10.6.6, resolutions, QE enabled.... I connect it with HDMI. But i havent sound with it. Bye. Plz Upload the files for us ... and u have HD 5450 ?? Quote Link to comment Share on other sites More sharing options...
vshk Posted February 26, 2011 Share Posted February 26, 2011 I follow the instruction and all steps passed. However, there is no resolution selection and the Graphics/Display section in System Profiler shows that the graphic card cannot be recognized. (The display still works but no QE/CI) My Card is HD5500 with device ID 0x68da1002. Any help? Thanks! Quote Link to comment Share on other sites More sharing options...
LifeOnRice Posted February 27, 2011 Share Posted February 27, 2011 I follow the instruction and all steps passed. However, there is no resolution selection and the Graphics/Display section in System Profiler shows that the graphic card cannot be recognized. (The display still works but no QE/CI) My Card is HD5500 with device ID 0x68da1002. Any help? Thanks! try all the ati framebuffers, one of them will not get a black screen having full QE Quote Link to comment Share on other sites More sharing options...
rubenmr Posted February 27, 2011 Share Posted February 27, 2011 This is my guide to enable QE on my XFX ATI HD5450 with AMD. 1- Download & burn EmpireEFI 1085 AMD Download 2- Install 10.6 Snow Leopard Retail DVD with Empire EFI CD 3- Reboot with Empire EFI CD, copy boot file from Empire CD and copy mach_kernel.test7 on root. Create \Extra\ & copy com.apple.Boot.plist Create \Extra\Extensions and copy all kexts located on Empire EFI CD\Extra\Preboot.dmg, if you need other kexts copy it too. 4- Download All_in_one.zip. Install ATI HD Injector, copy rom to \extra and install kexts with kexthelper. 5- Reboot and test if OSX loads correctly. Now run ComboUpdate 10.6.6. Install 10.6.4 USB (with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or here) 6- Reboot and ATI may work correctly with QE, resolutions.... I have this to enable my ati card on AMD. This is my com.apple.Boot.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Kernel</key> <string>mach_kernel.test7</string> <key>Timeout</key> <string>5</string> <key>GUI</key> <string>No</string> <key>Kernel Flags</key> <string>arch=i386 boot-uuid="PASTE YOUR HDD UUID" rd=*uuid</string> <key>Graphics Mode</key> <string>1024x768x32</string> </dict> </plist> Quote Link to comment Share on other sites More sharing options...
brutocaterano Posted February 27, 2011 Share Posted February 27, 2011 lavora con l'hd 5750? Quote Link to comment Share on other sites More sharing options...
Jerry_MK2 Posted February 27, 2011 Share Posted February 27, 2011 When I want to try different Ati Framebuffers, can I boot typing AtiFb=.... at boot screen (like we do with verbose mode -v) or must I edit everytime the com.apple.boot.plist with the new AtiFb parameter and type no parameter at boot screen? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.