Jump to content

New ALC861VD ALC268 ALC660/660VD

MadTux

By MadTux,
in AppleHDA

 Share
239 posts in this topic

Recommended Posts

collit99
collit99
Posted
Posted
I have tried it in my Acer Aspire 4720z and only the internal mic is showing in the preferences. The headphone/internal speakers switching works fine.

 

Thanks for the effort.

 

if you still have the old applehda with working external mic you can send it to me and i'll look at it.

Link to comment
Share on other sites
来去如风
来去如风
Posted
Posted

thanks very much for the driver of ALC861VD :censored2:

but the mic can"t work! my montherboard is ONDA A69T.

 

this is the codec which t got from ubuntu

Codec: Realtek ALC861-VD

Address: 3

Vendor Id: 0x10ec0862

Subsystem Id: 0x106b0c00

Revision Id: 0x100001

No Modem Function Group found

Default PCM:

rates [0x160]: 44100 48000 96000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Default Amp-In caps: N/A

Default Amp-Out caps: N/A

GPIO: io=2, o=0, i=0, unsolicited=1, wake=0

IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0

IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0

Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x34 0x34]

Converter: stream=0, channel=0

PCM:

rates [0x160]: 44100 48000 96000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x00 0x00]

Converter: stream=0, channel=0

PCM:

rates [0x160]: 44100 48000 96000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x00 0x00]

Converter: stream=0, channel=0

PCM:

rates [0x160]: 44100 48000 96000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x05 [Audio Output] wcaps 0x1d: Stereo Amp-Out

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x00 0x00]

Converter: stream=0, channel=0

PCM:

rates [0x160]: 44100 48000 96000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital

Converter: stream=0, channel=0

Digital:

Digital category: 0x0

PCM:

rates [0x160]: 44100 48000 96000

bits [0x1e]: 16 20 24 32

formats [0x1]: PCM

Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In

Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x00 0x00]

Converter: stream=0, channel=0

SDI-Select: 0

PCM:

rates [0x160]: 44100 48000 96000

bits [0x6]: 16 20

formats [0x1]: PCM

Connection: 1

0x22

Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x19 0x19] [0x80 0x80]

Connection: 6

0x18 0x19 0x1a 0x1b 0x1c 0x1d

Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Connection: 2

0x02 0x0b

Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x80 0x80] [0x80 0x80]

Connection: 2

0x03 0x0b

Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x80 0x80] [0x80 0x80]

Connection: 2

0x04 0x0b

Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x80 0x80] [0x80 0x80]

Connection: 2

0x05 0x0b

Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x081003c: IN OUT HP EAPD Detect

EAPD 0x0:

Pin Default 0x01014030: [Jack] Line Out at Ext Rear

Conn = 1/8, Color = Green

DefAssociation = 0x3, Sequence = 0x0

Pin-ctls: 0x40: OUT

Unsolicited: tag=00, enabled=0

Connection: 1

0x0c

Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x0810034: IN OUT EAPD Detect

EAPD 0x0:

Pin Default 0x01011031: [Jack] Line Out at Ext Rear

Conn = 1/8, Color = Black

DefAssociation = 0x3, Sequence = 0x1

Pin-ctls: 0x40: OUT

Unsolicited: tag=00, enabled=0

Connection: 1

0x0d

Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x0834: IN OUT Detect

Pin Default 0x01016032: [Jack] Line Out at Ext Rear

Conn = 1/8, Color = Orange

DefAssociation = 0x3, Sequence = 0x2

Pin-ctls: 0x40: OUT

Unsolicited: tag=00, enabled=0

Connection: 1

0x0e

Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x0834: IN OUT Detect

Pin Default 0x01012033: [Jack] Line Out at Ext Rear

Conn = 1/8, Color = Grey

DefAssociation = 0x3, Sequence = 0x3

Pin-ctls: 0x40: OUT

Unsolicited: tag=00, enabled=0

Connection: 1

0x0f

Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x081734: IN OUT Detect

Vref caps: HIZ 50 GRD 80

Pin Default 0x01a19850: [Jack] Mic at Ext Rear

Conn = 1/8, Color = Pink

DefAssociation = 0x5, Sequence = 0x0

Pin-ctls: 0x24: IN VREF_80

Unsolicited: tag=00, enabled=0

Connection: 1

0x0e

Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08173c: IN OUT HP Detect

Vref caps: HIZ 50 GRD 80

Pin Default 0x02a19c80: [Jack] Mic at Ext Front

Conn = 1/8, Color = Pink

DefAssociation = 0x8, Sequence = 0x0

Pin-ctls: 0x24: IN VREF_80

Unsolicited: tag=00, enabled=0

Connection: 2

0x0c* 0x0f

Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x0834: IN OUT Detect

Pin Default 0x01813050: [Jack] Line In at Ext Rear

Conn = 1/8, Color = Blue

DefAssociation = 0x5, Sequence = 0x0

Pin-ctls: 0x20: IN

Unsolicited: tag=00, enabled=0

Connection: 1

0x0d

Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x08173c: IN OUT HP Detect

Vref caps: HIZ 50 GRD 80

Pin Default 0x02214c40: [Jack] HP Out at Ext Front

Conn = 1/8, Color = Green

DefAssociation = 0x4, Sequence = 0x0

Pin-ctls: 0xc0: OUT HP VREF_HIZ

Unsolicited: tag=00, enabled=0

Connection: 2

0x0c* 0x0f

Node 0x1c [Pin Complex] wcaps 0x400001: Stereo

Pincap 0x0820: IN

Pin Default 0x99331150: [Fixed] CD at Int ATAPI

Conn = ATAPI, Color = Black

DefAssociation = 0x5, Sequence = 0x0

Misc = NO_PRESENCE

Pin-ctls: 0x20: IN

Node 0x1d [Pin Complex] wcaps 0x400000: Mono

Pincap 0x0820: IN

Pin Default 0x00000100: [Jack] Line Out at Ext N/A

Conn = Unknown, Color = Unknown

DefAssociation = 0x0, Sequence = 0x0

Misc = NO_PRESENCE

Pin-ctls: 0x20: IN

Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital

Pincap 0x0810: OUT

Pin Default 0x01441170: [Jack] SPDIF Out at Ext Rear

Conn = RCA, Color = Black

DefAssociation = 0x7, Sequence = 0x0

Misc = NO_PRESENCE

Pin-ctls: 0x40: OUT

Connection: 1

0x06

Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono

Processing caps: benign=0, ncoeff=17

Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Connection: 11

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono

Link to comment
Share on other sites
xghost
xghost
Posted
Posted

I tried the new AppleHDA.kext for Alc268 and external mic is working now.

Unforutnately sound is till low volume when waking from sleep, yet only on the headphone out... Speakers have normal volume level after waking from sleep...

Link to comment
Share on other sites
AtomOSX
AtomOSX
Posted
Posted
if you still have the old applehda with working external mic you can send it to me and i'll look at it.

 

My external mic never worked. I hoped that yours would sove the problem. :P

 

But at least we have a very good progress with the automatic output switch.

 

I have one question. Are you editing the controller plist or the platform plist ? Also the HDA in the plugins directory don't have the platform kext.

Link to comment
Share on other sites
MadTux
MadTux
Posted
  • Author
Posted
thanks very much for the driver of ALC861VD :)

but the mic can"t work! my montherboard is ONDA A69T.

 

this is the codec which t got from ubuntu

Codec: Realtek ALC861-VD

Address: 3

Vendor Id: 0x10ec0862

Thx for the codec!

Link to comment
Share on other sites
Eddie94
Eddie94
Posted
Posted

Hello to all!My Feedback

Sound and Mic don't work in iDeneb 10.5.5 :D

MadTux ALC861VDBEtaLEo+HDAEnabler:the system don't load the two kext

ONly MadTux ALC861BetaLeo:Don't load the kext

ALC862B Cllie99 fix:Don't load the kext :D:(:):(

Link to comment
Share on other sites
MadTux
MadTux
Posted
  • Author
Posted
Hello to all!My Feedback

Sound and Mic don't work in iDeneb 10.5.5 :D

MadTux ALC861VDBEtaLEo+HDAEnabler:the system don't load the two kext

ONly MadTux ALC861BetaLeo:Don't load the kext

ALC862B Cllie99 fix:Don't load the kext :D:(:D:(

Sorry guyz I posted a wrong kext for ALC862_beta_Leo, hope this works...

Link to comment
Share on other sites
MadTux
MadTux
Posted
  • Author
Posted
MadTux, the driver not work ;) , the system load ONLY AppleHDAController !

How I am listening right now?

post-103792-1224002498_thumb.png

and same kext from sendspace:

http://www.sendspace.com/file/ckt7uz

 

MadTux, the driver not work :D , the system load ONLY AppleHDAController !

ps:I have only your AppleHDA.kext!

 

U are on Toshiba??

if yes try this one.

MadTux_ALC862_Toshiba.zip

Link to comment
Share on other sites
Damn.x
Damn.x
Posted
Posted

Can you write a short install guide for ALC268, please?

 

I have Internal Speakers working and I see the automatic switch between Internal Speakers and Headphone but I have no sound on Headphone. Why can I not completely mute the sound?

 

what kext are you using?

 

I used the AppleHDA.kext of the MadTux_ALC268_A.zip from the first post, installed with KextHelper b7.

Is there a working kext for the acer aspire one with working auto-switch, internal speakers, headphone and audio-in? Microphone is not so important for me.

Link to comment
Share on other sites
collit99
collit99
Posted
Posted
what kext are you using?

 

 

I used the AppleHDA.kext of the MadTux_ALC268_A.zip from the first post, installed with KextHelper b7.

Is there a working kext for the asus aspire one with working auto-switch, internal speakers, headphone and audio-in? Microphone is not so important for me.

 

Try the one on my signature...

Link to comment
Share on other sites
markpenn
markpenn
Posted
Posted
Hi,

 

New AppleHDA kext with Internal/External MIC, still no mute but I'm working on it.

 

Based on ALC268Installer2.

 

Credit goes to Taruga and Madtux!

 

Auto switching and Shutdown(Without using HDAFIX v3) should work.

 

Works on my Acer Aspire 4310.

 

Still needs HDAEnabler.

 

ALC268_with_External_Mic.zip

 

 

with this ..I have lound sounds/noise the mins the osx is logged in..

 

?

Link to comment
Share on other sites
Damn.x
Damn.x
Posted
Posted
with this ..I have lound sounds/noise the mins the osx is logged in..

 

?

It's the noise from the internal mic, I have this too. The only thing (for this moment) you can do is to turn the volume from the internal mic to 0%.

 

 

Try the one on my signature...

Oh sorry, I used the one from MadTux_collit99_ALC268_B.zip. I think it must be the same as in the alc268_january08.zip by Taruga.

 

Tommorow I will try your one. Can I overwrite the existing AppleHDA.kext with Kext Helper or do I have to delete the old first and then install the new?

On a new installation of mac os x, is it important to install the ALC268 Installer (1, 2 or 5?) first and after this the AppleHDA.kext or can I directly replace the patched AppleHDA.kext? Do you know a difference between ALC268 Installer 1, 2 or 5? What's with HDAEnabler.kext, is it required anymore?

Can you write a very short step-by-step guide for this ALC268 installation, please?

Link to comment
Share on other sites
collit99
collit99
Posted
Posted
with this ..I have lound sounds/noise the mins the osx is logged in..

 

?

 

 

This is due to External MIC, go to sound preferences under input device, and lower the volume of the 2nd "Internal Mic" until the white noise is gone.

 

It's the noise from the internal mic, I have this too. The only thing (for this moment) you can do is to turn the volume from the internal mic to 0%.

Oh sorry, I used the one from MadTux_collit99_ALC268_B.zip. I think it must be the same as in the alc268_january08.zip by Taruga.

 

Tommorow I will try your one. Can I overwrite the existing AppleHDA.kext with Kext Helper or do I have to delete the old first and then install the new?

On a new installation of mac os x, is it important to install the ALC268 Installer (1, 2 or 5?) first and after this the AppleHDA.kext or can I directly replace the patched AppleHDA.kext? Do you know a difference between ALC268 Installer 1, 2 or 5? What's with HDAEnabler.kext, is it required anymore?

Can you write a very short step-by-step guide for this ALC268 installation, please?

 

KextHelper do automatic backup of kext that is being replaced.

 

On new OSX just install the attached HDAEnabler and the AppleHDA(in my sig) using KextHelper or OSX86Tools, repair permission using Disk Utility and reboot. You don't need to install any of those ALC268 Installer.

 

HDAEnabler.kext.zip

Link to comment
Share on other sites
ckybam69
ckybam69
Posted
Posted

why does the alc861-vd not work on toshiba laptops? is it because of the problem where in linux its alc861-vd and in vista its alc862 on toshiba laptops?

 

also i tried making a dump from the ubuntu live cd and i only get like 5 lines of text:

 

Codec: Generic 11c1 ID 1040
Address: 0
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1

 

i am on toshiba satellite a135-s2266 laptop. i get sound from the speakers and i have volume control but no headphones ore mic. any ideas on what i can do to get this working?

Link to comment
Share on other sites
Damn.x
Damn.x
Posted
Posted
On new OSX just install the attached HDAEnabler and the AppleHDA(in my sig) using KextHelper or OSX86Tools, repair permission using Disk Utility and reboot. You don't need to install any of those ALC268 Installer.

Great work! This works very good on aspire one but I found 2 errors:

 

1. I can't turn the volume of audio-in down. That means, I have the input volume set to 0% but it plays the input signal with the same volume and quality as the input source. When I push the volume slider only a bit from left (0%) to right (100%) the sound will get louder, has a noise on it and it distort the audio quality. The noise appears also when there is no input source connected.

I think when the input volume is set to 0%, the input signal is 100% and when the input volume is set to 100%, it's 200% or more of the input signal.

 

2. The audio-in signal runs on internal mic, not on internal speakers.

I mean that's the reason why the mic will not work correctly.

 

If I'm wrong with the second point, for what are the internal speakers on input?

 

Can you fix this, please? It would be very great to have an almost full working ALC268 driver.

Link to comment
Share on other sites
the light guy
the light guy
Posted
Posted

On a Lenovo 3000 N100 Model 0768-E5U funning Leo4all 10.5.2, only MTux_ALC861VD_Leo.zip works. The beta supports input but not output.

 

The chipset in question is identified by Lenovo as an ALC862 although that may just be a different naming convention. Let me know if you want any dumps - I'm quad-booting Ubuntu 8, OSX 10.5.2, Vista x86 and FreeBSD 7 - so I can give you pretty much anything.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...