u0159419 Posted October 10, 2007 Share Posted October 10, 2007 Just bought this Board an a very cheap vga nvidia 6200tc an after some Problems i had, it runs perfect. 1.The Bios must be flashed back to 1.00 (Withe higher Bios you will get Bootproblems) 2. Install "uphuck_10.4.9_universal_dvd_v1.3" and select the intel-part + azalia sound + realtek1000 nic 3. just enjoy your new hackintosh everything works out of the box Link to comment Share on other sites More sharing options...
breadmix Posted October 19, 2007 Share Posted October 19, 2007 U rule dude i tried like all bioses except 1.0 gon flash it right now Link to comment Share on other sites More sharing options...
breadmix Posted October 19, 2007 Share Posted October 19, 2007 100% confirmed all works Link to comment Share on other sites More sharing options...
Forceman Posted October 19, 2007 Share Posted October 19, 2007 I'm running 1.30 bios with no problems. Link to comment Share on other sites More sharing options...
breadmix Posted October 19, 2007 Share Posted October 19, 2007 Well 1.50 and 1.40 sure dont work. Everything qorks now here with 1.0 bios sound network 3d everything Been watching movie's with it all night gon make his my HTPC who need windows mediacenter Link to comment Share on other sites More sharing options...
eject Posted October 24, 2007 Share Posted October 24, 2007 if i flash this board to rev 1.0 will there still be support for celeron s420 conroe-l? i already have this cpu and i look for µatx board with full audio support Link to comment Share on other sites More sharing options...
flibblesan Posted November 20, 2007 Share Posted November 20, 2007 I've got the Asrock ConRoe1333-D667 R1.0 1.30 bios and both Leopard and Tiger won't boot from hard disk. I have to boot via the DVD. This is installed to a Seagate SATA drive on port 1. Is this because of the BIOS version? Should I downgrade? Link to comment Share on other sites More sharing options...
nightwalker Posted November 20, 2007 Share Posted November 20, 2007 i have conroe1333 and bios 1.3 as well not sure why but it only boots up with the lan cable plugged in, otherwise it would just stop on the white apple screen and restart itself if you have the lan cable plugged in, it works perfectly Link to comment Share on other sites More sharing options...
mysticmac Posted November 30, 2007 Share Posted November 30, 2007 Hello Looking for build a Hackintosh with a Asrock ConRoe1333-D667, using GMA (no graphic card) and 10.4.10 (XxX) What about wake-sleep ?Need patch or special kernel ? Thanks for your help Link to comment Share on other sites More sharing options...
dbarrett5381 Posted November 30, 2007 Share Posted November 30, 2007 Hello Looking for build a Hackintosh with a Asrock ConRoe1333-D667, using GMA (no graphic card) and 10.4.10 (XxX) What about wake-sleep ?Need patch or special kernel ? Thanks for your help If you use the brazilmac leopard dvd, everything works out of the box, well except the mouse tearing issue. I have the exact same board and am running 10.5.1. I just installed it and it worked. Under 10.4.10 you will need to install lan and sound kexts, everything else works. Link to comment Share on other sites More sharing options...
Recommended Posts