argeas Posted February 18, 2007 Share Posted February 18, 2007 ok guys i dont want to be anoying but i want to test the versions and help with the logs but i cant fin the new versions!!! i cant ind any versions atfter iwi3945v4 at http://code.google.com/p/iwidarwin/ sorry or my stupidity but were are the new versions?? please someone! i just want to help acer travelmate 4283 with bcm5787m and iwi3945abg Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306268 Share on other sites More sharing options...
superbadboy Posted February 18, 2007 Share Posted February 18, 2007 I get kernel panic with v8 and V7 my ipw3945 card stays off The attached logs are from the iwi3945 V7 Go to http://code.google.com/p/iwidarwin/downloads/list for the iwi2200 latest binaries dmesg.txt ioreg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306273 Share on other sites More sharing options...
eLMafUDd Posted February 18, 2007 Share Posted February 18, 2007 argeas - http://forum.insanelymac.com/index.php?s=&...st&p=306082 Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306280 Share on other sites More sharing options...
Glauber Lobo Posted February 19, 2007 Share Posted February 19, 2007 (edited) The link is to the older iwi2200 v6-test only, not the new iwi2200 version with Javaloui customization for performance test. Thks anyway. Edited February 19, 2007 by Glauber Lobo Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306314 Share on other sites More sharing options...
SlayerX Posted February 19, 2007 Share Posted February 19, 2007 "For the other questions please check out the FAQ" Ok... but the English in the FAQ is really strange... But lets put it this way, i have an 10.4.8 install on my ThinkPad, what additional files do i need except the "iwi3945v8.dmg"? And if i get an kernel panic, wich files do i need to delete, to make the computer boot again. Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306556 Share on other sites More sharing options...
JoShmo1 Posted February 19, 2007 Share Posted February 19, 2007 (edited) Installed the latest version of the driver shows as built in ethernet in network settings, connects and gets an IP address, Added in dns servers and managed to browse the internet, but it was really slow and then crashed after a few mins - You need to restart your computer. so close! HP NC6120 10.4.8 kernal iwi2200 Edited February 19, 2007 by JoShmo1 Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306598 Share on other sites More sharing options...
Bill Harrison Posted February 19, 2007 Share Posted February 19, 2007 hi,all. this is only for iwi2200 user. Are There someone which cannot associate the network in newest version posted by jalavoui? (especialy 2945abg user) I fixed the problem in current trunk. if someone can use xcode, plz build current trunk and test it. if someone want binaries ,I will post binaries. Please post the binaries, I am unfamilair with XCODE. Thanks! Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306632 Share on other sites More sharing options...
FlipHDK Posted February 19, 2007 Share Posted February 19, 2007 no you have to get the 10.4.5 the 10.4.6 and the 10.4.7 extract all files from 10.4.5 to a folder overwrite with files from 10.4.6 and 10.4.7 this gives some work better to use the files from 10.4.8 - extract only once and it's done i've explain all this in previous posts Can you upload what we need? Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306688 Share on other sites More sharing options...
cheev Posted February 19, 2007 Share Posted February 19, 2007 Trying to use this and v7 iwi2200 but still see message in black square - You need to restart your computer. Hold down the power buttton... I am using 10.4.8. Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306708 Share on other sites More sharing options...
tomaszjc7 Posted February 19, 2007 Share Posted February 19, 2007 (edited) First of all I would like to thank all those responsible for helping develop the these drivers and so forth, your time and effort is extremely appriciated. I tested the iwi3945 on my laptop (gateway nx100). The installation did disable my BT as it did for others as well. Posted are my logs. Hope they help. If there is anything else we, as beta testers, can do to assist in the process please let us know. Godspeed. dmesg.txt ioreg.txt system.txt Edited February 19, 2007 by tomaszjc7 Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306741 Share on other sites More sharing options...
poplars Posted February 19, 2007 Share Posted February 19, 2007 ok so . . . I'm not sure if I'm installing this right. I got the kext on my desktop, did sudo kextload (this was after I edited it btw) and nothing happened . . I have a 2915ABG pro/wireless . . . am I doing something wrong here? Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306834 Share on other sites More sharing options...
ttorok Posted February 19, 2007 Share Posted February 19, 2007 you have to get the 10.4.5 the 10.4.6 and the 10.4.7 extract all files from 10.4.5 to a folder overwrite with files from 10.4.6 and 10.4.7 this gives some work better to use the files from 10.4.8 - extract only once and it's done i've explain all this in previous posts I'm using IO80211Family.kext and Apple80211.framework from MacOSXUpd10.4.8Intel (extracted with Pacifist). I still have the well known Couldn't alloc class "darwin_iwi2100" message at boot... Previous status: http://forum.insanelymac.com/index.php?s=&...st&p=305320 Intel2100 Logs are attached: dmesg.txt ioreg.txt system.log.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306836 Share on other sites More sharing options...
Tek_No Posted February 19, 2007 Share Posted February 19, 2007 (edited) i've tested this version today it allows me to download a large file without crashes we're almost ready to release a new iwi2200 stable version i haven't mentioned before but you all know that a .dmg files is a disk image and that it's opened by the finder no zip compression here Sorry, was on vacation for a couple of days... Just came back home and installed the latest version of your iwi2200 driver... Works great for me on 10.4.8 Beta 9 Amazing job!!! Take care, Tek_No Edit: was just using Transmission to download a torrent... Crash: need to restart your computer So apparently the latest version of the driver is not as stable as the previous one I was using (have to admit that I'm still using all original 10.4.8 kexts) Edited February 19, 2007 by Tek_No Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306903 Share on other sites More sharing options...
jalavoui Posted February 19, 2007 Author Share Posted February 19, 2007 I still have the well known Couldn't alloc class "darwin_iwi2100" message at boot... looks like you need to fix permissions - use Applications/Utilities/ disk utility to do that you're using iwi2100_v3.dmg? that's the last build looks like many users are getting trouble with the IO80211Family.kext and Apple80211.framework can someone build a pkg or zip the files for 10.4.7 and 10.4.8 and make them available i now it's not legal but i really don't keer Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306961 Share on other sites More sharing options...
thor486 Posted February 19, 2007 Share Posted February 19, 2007 I tried to load the 3945 v4 dmg package but no card found. if i try to load the kext manually it says: cannot resolve dependencies for kernel extension iwi3945.kext what's wrong? Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306966 Share on other sites More sharing options...
jalavoui Posted February 19, 2007 Author Share Posted February 19, 2007 iwi3945 more code fixing if the driver crash try it by booting in -s mode and post the last log lines here this version is +/- ready to be checked in xcode can someone try to do this? i need someone willing to get xcode and try iwi3945_v9.dmg Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-306980 Share on other sites More sharing options...
argeas Posted February 20, 2007 Share Posted February 20, 2007 hi jalavoui . after v8 osx wont boot . i tried booting -s but nothing. then tried -s and sbin/fsck and /sbin/mount and tried to uninstall by rm /System/Library/Extensions/iwi3945.kext rm /System/Library/Extensions.* kextcache -k /System/Library/Extensions and then reboot but still wont boot cause iwi3945 is still there if there is another way to uninstall v8 and boot so i can install v9 and test it please say else i will just renstall osx thsnks Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307032 Share on other sites More sharing options...
xkazu Posted February 20, 2007 Share Posted February 20, 2007 (edited) hi,all. this is iwi2200's package in current unstale. it is mainly 2945abg user ( fixed association fail in jalavoui's post version). performance problem dont fix because there are another reason about performance issue. changelogs: r167: * linkstate is down when abort scan. r166: * set IPW_RX_BUF_SIZE 2048 to avoid overflow in rx r164: * fixed Issue:33 fixed the problem which priv->mac_addr is not set. warinig: this is unstable package. i dont consider kext dependency problem . if dependency problem occurs , dont post it. iwi2200_trunk_r168.dmg Edited February 20, 2007 by xkazu Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307085 Share on other sites More sharing options...
StuMan1337 Posted February 20, 2007 Share Posted February 20, 2007 (edited) First, v9 of the iwi3945 driver still gives me a kernel panic (picture attached). Next, iwi3945more code fixing if the driver crash try it by booting in -s mode and post the last log lines here this version is +/- ready to be checked in xcode can someone try to do this? i need someone willing to get xcode and try What steps are needed to check it in xcode? Edited February 20, 2007 by StuMan1337 Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307099 Share on other sites More sharing options...
cheev Posted February 20, 2007 Share Posted February 20, 2007 (edited) Friends! Can you show me link to the _latest_ 2200bg driver? Maybe iam trying to use old versions... Big Thanks. Edited February 20, 2007 by cheev Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307271 Share on other sites More sharing options...
Ivan F. Ablasmkiy Posted February 20, 2007 Share Posted February 20, 2007 (edited) Intsall V9, but when try to kextload iwi3945 system is halted, in single mode too (in attachment) Now i try to install and reboot, maby help.... Edited February 20, 2007 by Ivan F. Ablasmkiy Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307294 Share on other sites More sharing options...
SlayerX Posted February 20, 2007 Share Posted February 20, 2007 if there is another way to uninstall v8 and boot so i can install v9 and test it please say else i will just renstall osx You need to boot from your OSx86 CD, then start the Terminal, THEN do the step sudo -s rm /Volumes/"YOURMACOSX86PARTITIONHERE"/System/Library/Extensions/iwi3945.kext rm /Volumes/"YOURMACOSX86PARTITIONHERE"/System/Library/Extensions.* kextcache -k /Volumes/"YOURMACOSX86PARTITIONHERE"/System/Library/Extensions I did install the v8 drivers but got an kernel Panic Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307328 Share on other sites More sharing options...
Bill Harrison Posted February 20, 2007 Share Posted February 20, 2007 hi,all. this is iwi2200's package in current unstale. it is mainly 2945abg user ( fixed association fail in jalavoui's post version). performance problem dont fix because there are another reason about performance issue. changelogs: r167: * linkstate is down when abort scan. r166: * set IPW_RX_BUF_SIZE 2048 to avoid overflow in rx r164: * fixed Issue:33 fixed the problem which priv->mac_addr is not set. warinig: this is unstable package. i dont consider kext dependency problem . if dependency problem occurs , dont post it. iwi2200_trunk_r168.dmg Much better here, I can actually associate and use the network, but it is less stable than V6 and not any faster (Of course, you already knew this ) Will revert to V6 for now, but whatever you did fixed my inability to get on the network xkazu, so your definitely getting there! Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307379 Share on other sites More sharing options...
Benjl25 Posted February 20, 2007 Share Posted February 20, 2007 can someone build a pkg or zip the files for 10.4.7 and 10.4.8 and make them available i now it's not legal but i really don't keer Hi, I follow this topic 'cause i own a 3945 card. I made this rar for people who have problem with IONet et IO802 kext. I hope it comes from the good updates. I post the official update link i use to make the rar : http://www.apple.com/downloads/macosx/appl...46forintel.html http://www.apple.com/downloads/macosx/appl...e1047intel.html http://www.apple.com/downloads/macosx/appl...pdateintel.html Correct me if it's uncorrect. Link for KEXT (10.4.6 - 10.4.7 - 10.4.8): http://benjl25.dyndns.org/macos/AppleUpdate.rar Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307386 Share on other sites More sharing options...
Nebzar Posted February 20, 2007 Share Posted February 20, 2007 (edited) Hi, thanks to all for your work! I now give my little contribution. I downloaded: MacOSXUpd10.4.7Intel.dmg (thus, not the Combo update); MacOSXUpd10.4.8Intel.dmg (again, not the Combo update). I then extracted, from each of these updates, the following three items: IONetworkingFamily.kext IO80211Family.kext Apple80211.framework Then, I tried for each of those "triplets" all the latest versions of iwi3945, by manually kextloading the driver (the ethernet cable has been always left unplugged). Results: 1) With kexts and framework from 10.4.7 update: 0.7, 0.8, 0.9 DO NOT load, due to unsatisfied dependencies. 2) With kexts and framework from 10.4.8 update: 0.7 loads successfully; ifconfig shows indeed an eth address (seems different from the one under winXP) but the interface is inactive, I can't turn it on neither with the phisical switch nor with fn-F5, nor by rebooting after having switched it on under WinXP; 0.8: kernel panic; 0.9: kernel panic. I think something is still unclear regarding the correct kexts to use, I have read all the posts on this thread and still I am not sure about which ones have to be used... Hope this helps, best regards Edited February 20, 2007 by Nebzar Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/32/#findComment-307437 Share on other sites More sharing options...
Recommended Posts