Slice Posted November 17, 2022 Share Posted November 17, 2022 Host Bridge sometimes has ACPI name as "MCHC" and Clover has such patch. But it is rear needed. 2 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2797356 Share on other sites More sharing options...
8ender Posted December 1, 2022 Share Posted December 1, 2022 (edited) Anyone experiencing instability with this setup or similar? I have a Z390 Aorus Pro Wifi + 9900k + 5700xt and while my EFI isn't exactly the same as this one it's very similar. I'm getting kernel panics randomly. Turning the overclock and XMP off seems to help, but it's still unstable. Seems to be related to anything that tries to use the GPU. Was rock solid on Monterey. Edited December 1, 2022 by 8ender Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2798112 Share on other sites More sharing options...
aniuks27 Posted December 1, 2022 Share Posted December 1, 2022 1 hour ago, 8ender said: Anyone experiencing instability with this setup or similar? I have a Z390 Aorus Pro Wifi + 9900k + 5700xt and while my EFI isn't exactly the same as this one it's very similar. I'm getting kernel panics randomly. Turning the overclock and XMP off seems to help, but it's still unstable. Seems to be related to anything that tries to use the GPU. Was rock solid on Monterey. It's quite solid to be honest. My specs are a little different though... Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2798116 Share on other sites More sharing options...
8ender Posted December 2, 2022 Share Posted December 2, 2022 9 hours ago, aniuks27 said: It's quite solid to be honest. My specs are a little different though... I'm such an idiot. Apparently, weeks ago when I'd generated a new USBMap.kext I'd named the file USBPorts.kext and didn't update my config.plist. So I was just blowing right past the USB port limit. Monterey apparently didn't care that much about this, but Ventura cared a lot. 1 1 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2798129 Share on other sites More sharing options...
miliuco Posted December 18, 2022 Author Share Posted December 18, 2022 EFI folder with OpenCore 0.8.7 There are 4 config.plist files for different SMBIOS: config-13-imac-amd.plist: iMac19,1 + dGPU AMD + iGPU enabled in BIOS config-13-imac-intel.plist: iMac19,1 + iGPU enabled in BIOS as main card config-13-imacpro.plist: iMacPro1,1 + dGPU AMD + iGPU disabled in BIOS config-13-macpro.plist: MacPro7,1 + dGPU AMD + iGPU disabled in BIOS. Remember to fill in your serial and ROM numbers (they are empty). EFI-0.8.7.zip 3 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2798996 Share on other sites More sharing options...
salutt Posted December 30, 2022 Share Posted December 30, 2022 1 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2799410 Share on other sites More sharing options...
YangJsheng Posted January 7, 2023 Share Posted January 7, 2023 Hello master, is SSDT-Navi_Vega.aml suitable for my machine? thanks SUPERMICRO X10DAi / Xeon E5-2643v3/AMD Vega54/BCM94360 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2799719 Share on other sites More sharing options...
YangJsheng Posted January 7, 2023 Share Posted January 7, 2023 my EFI 1553109711_macOS13VenturaEFI.zip Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2799725 Share on other sites More sharing options...
miliuco Posted January 7, 2023 Author Share Posted January 7, 2023 @YangJsheng Please add a signature to your user profile. Does macOS detect you Vega 54 without SSDT? Does the GPU work fine on macOS? If both answers are yes, you don't need the SSDT. But you can try it. SSDT-BRG0 or SSDT-VEGA. BRG0 is simpler si I would start with it. Don't pay attention to the VEGA name, it's not specific to Vega cards. Both SSDTs need the correct IOReg path to the GPU: gfxutil tool >> copy the line of the graphic card Hackintool >> PCIe tab >> mouse over the Vega card >> copy IOReg tab. paste here the IOREg path and I'll say to you how it must be written into the SSDT. Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2799731 Share on other sites More sharing options...
D3v1L Posted January 9, 2023 Share Posted January 9, 2023 On 12/18/2022 at 8:35 PM, miliuco said: EFI folder with OpenCore 0.8.7 There are 4 config.plist files for different SMBIOS: config-13-imac-amd.plist: iMac19,1 + dGPU AMD + iGPU enabled in BIOS config-13-imac-intel.plist: iMac19,1 + iGPU enabled in BIOS as main card config-13-imacpro.plist: iMacPro1,1 + dGPU AMD + iGPU disabled in BIOS config-13-macpro.plist: MacPro7,1 + dGPU AMD + iGPU disabled in BIOS. Remember to fill in your serial and ROM numbers (they are empty). EFI-0.8.7.zip 6.54 MB · 21 downloads And please, remember to remove from this EFI : CPUFriendDataProvider.kext (i think DataProvider for i7 9700k and absolutely not suitable for other CPU...) and UTBMap.kext (usb map, maybe not suitable for your system...) and make your own........... 1 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2799776 Share on other sites More sharing options...
miliuco Posted January 9, 2023 Author Share Posted January 9, 2023 (edited) @D3v1L Yes, UTBMap only for Z390 Aorus Elite and the kext for i7 9700 (and only for MacPro7,1 SMBIOS, iMacPro1,1 or iMac19,1 don't need it). Edited January 9, 2023 by miliuco 1 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2799786 Share on other sites More sharing options...
panosru Posted January 18, 2023 Share Posted January 18, 2023 Hey all! I'm experiencing a very strange behaviour from one of my devices and I do suspect that it is the device's drivers issue, but, I'm not sure though. The touch functionality in my Wacom Intuos tablet (CTH-690) worked fine until recently that I noticed it doesn't. While the pen works fine and the touch is on, when I try to use my fingers on the tablet, it isn't working and the mouse isn't moving. I tried to completely remove the drivers and erase every trace of wacom, then install the drivers again, but to no avail. I tried connecting the device to another active USB hub that I have and it isn't working still, but, on the case's and motherboards USB ports, it works fine, even on a passive USB hub it also works. Then I put the tablet back to the USB hub it was originally connected and put my computer to sleep, left the house, when I returned I woke the computer and I noticed that the touch functionality was working perfectly fine. I reboot the computer, no touch... I put my computer to sleep, let it "power down", then woke it up and it was working! I have no clue for why the USB that the tablet is connected allows the touch functionality to work after waking up but not after powering up, could it be related to USBMap kext? I haven't touched it... very strange behaviour... Thanks! Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800179 Share on other sites More sharing options...
miliuco Posted January 19, 2023 Author Share Posted January 19, 2023 (edited) @panosru Good morning. I think that it's better to open a new thread, your issue seems unrelated to the theme of this thread. I'm sure you'll get more help in this way. Edited January 19, 2023 by miliuco 1 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800214 Share on other sites More sharing options...
panosru Posted January 19, 2023 Share Posted January 19, 2023 (edited) Oh cr@p! I messed up the topics! Sorry! Edited January 19, 2023 by panosru 1 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800220 Share on other sites More sharing options...
YangJsheng Posted January 22, 2023 Share Posted January 22, 2023 Can I get Vega information on win10? How to get it if possible. Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800393 Share on other sites More sharing options...
miliuco Posted January 22, 2023 Author Share Posted January 22, 2023 @YangJsheng Do you mean to get the ACPI path to the device? Go here and look at Finding the ACPI Path of the GPU. Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800396 Share on other sites More sharing options...
YangJsheng Posted January 24, 2023 Share Posted January 24, 2023 (edited) Hello, please see if this is the case? ACPI(_SB_)#ACPI(PCI1)#ACPI(QR2A)#ACPI(H000)#PCI(0000)#PCI(0000) \_SB_.PCI1.QR2A.H000 1002:687f Edited January 26, 2023 by YangJsheng Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800508 Share on other sites More sharing options...
Slice Posted January 25, 2023 Share Posted January 25, 2023 Use English please. Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800547 Share on other sites More sharing options...
miliuco Posted January 26, 2023 Author Share Posted January 26, 2023 (edited) @YangJsheng You have looked at the GPU Device Manager on Windows, right? There is a property named Location paths, here you can see 2 keys, the ACPI path and the PCI path. For example, in my machine these are the 2 keys: PCIROOT(0)#PCI(0100)#PCI(0000)#PCI(0000)#PCI(0000) ACPI(_SB_)#ACPI(PCI0)#ACPI(PEG0)#ACPI(PEGP)#PCI(0000)#PCI(0000) Spoiler How to translate them to the strings used on macOS? PCI path >> to be used in config.plist I use it all. The # separator becomes / PCIROOT(0) becomes PciRoot(0x0) PCI becomes Pci The 4 numbers in each PCI block are converted to 2 pairs of hexadecimal numbers: PCI(0100) >> Pci(0x1,0x0), PCI(0000) >> Pci(0x0,0x0). The result is: PciRoot(0x0)/Pci(0x1.0x0)/Pci(0x0.0x0)/Pci(0x0.0x0)/Pci(0x0.0x0) ACPI path >> to be used in SSDT I use only ACPI blocks. The # separator is converted to . ACPI(_SB_) becomes _SB_ ACPI(PCI0) becomes PCI0 ACPI(PEG0) becomes PEG0 ACPI(PEGP) becomes PEGP The result is: _SB_.PCI0.PEG0.PEGP Spoiler Do the same checking your own values. Edited January 26, 2023 by miliuco 1 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800622 Share on other sites More sharing options...
YangJsheng Posted January 26, 2023 Share Posted January 26, 2023 (edited) On 2023/1/24 at PM4点43分, YangJsheng said: Thank you, thank you, thank you very much! Please help me to see the error. PCIROOT(80)#PCI(0200)#PCI(0000)#PCI(0000)#PCI(0000) ACPI(_SB_)#ACPI(PCI1)#ACPI(QR2A)#ACPI(H000)#PCI(0000)#PCI(0000) ACPI(_SB_)#ACPI(PCI1)#ACPI(QR2A)#ACPI(PXSX)#PCI(0000)#PCI(0000) PCIROOT(80). how to modify？ PCIROOT(80)/PCI(0200)/PCI(0x0.0x0)/PCI(0x0.0x0)/PCI(0x0.0x0) Where in config.plist？ On 2023/1/24 at PM4点43分, YangJsheng said: ACPI(_SB_)#ACPI(PCI1)#ACPI(QR2A)#ACPI(H000)#PCI(0000)#PCI(0000) The result is:_SB_.PCI1.QR2A.H000 download ssdt? 1002:687f xk Edited January 27, 2023 by YangJsheng Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800625 Share on other sites More sharing options...
miliuco Posted January 27, 2023 Author Share Posted January 27, 2023 (edited) @YangJsheng The PCI path for config.plist can be PciRoot(0x80)/Pci(0x2,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0) The ACPI path for SSDT can be as you say _SB_.PCI1.QR2A.H000 I attach the SSDT-VEGA adapted to your ACPI path, try it and comment if it works. Remember to put SST-VEGA-aml into the ACPI folder and also add it to the config.plist. SSDT-VEGA.dsl is text plain, so you can see the code. SSDT-VEGA.aml SSDT-VEGA.dsl Edited January 27, 2023 by miliuco Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800659 Share on other sites More sharing options...
YangJsheng Posted January 28, 2023 Share Posted January 28, 2023 (edited) 路径描述是修改还是保持不变？ Edited March 2, 2023 by YangJsheng Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2800689 Share on other sites More sharing options...
miliuco Posted March 7, 2023 Author Share Posted March 7, 2023 (edited) EFI updated to OpenCore 0.9.0 There are 4 config.plist files for different SMBIOS: config-13-imac-amd.plist: iMac19,1 + dGPU AMD + iGPU enabled in BIOS config-13-imac-intel.plist: iMac19,1 + iGPU enabled in BIOS as main card config-13-imacpro.plist: iMacPro1,1 + dGPU AMD + iGPU disabled in BIOS config-13-macpro.plist: MacPro7,1 + dGPU AMD + iGPU disabled in BIOS. Remember to fill in your serial and ROM numbers (they are empty). Note: UTBMap.kext (next to USBToolBox.kext) is made for Gigabyte Z390 Aorus Elite. If you have a different motherboard, you must have your own USB ports map. EFI-0.9.0.zip Edited April 9, 2023 by miliuco 3 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2802128 Share on other sites More sharing options...
miliuco Posted April 9, 2023 Author Share Posted April 9, 2023 EFI updated to OpenCore 0.9.1 There are 4 config.plist files for different SMBIOS: config-13-imac-amd.plist: iMac19,1 + dGPU AMD + iGPU enabled in BIOS config-13-imac-intel.plist: iMac19,1 + iGPU enabled in BIOS as main card config-13-imacpro.plist: iMacPro1,1 + dGPU AMD + iGPU disabled in BIOS config-13-macpro.plist: MacPro7,1 + dGPU AMD + iGPU disabled in BIOS. Remember to fill in your serial and ROM numbers (they are empty). Note: UTBMap.kext (next to USBToolBox.kext) is made for Gigabyte Z390 Aorus Elite. If you have a different motherboard, you must have your own USB ports map. EFI-0.9.1.zip 4 1 Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2803387 Share on other sites More sharing options...
polkaholga Posted May 20, 2023 Share Posted May 20, 2023 Hi, though my mobo ( Z390 Aorus Pro ) is not exactly the same I do hope I may find some answers in this thread. My problem is that I cannot get my ethernet to work. The Aorus Pro uses the same i219V (7) (Vendor 0x8086 / Device 0x15BC ) as the Aorus Elite and it's flawless working with Big Sur, but since Monterey I could never get it to work. Though IORegistry Explorer and About This Mac show the port as connected and as en0 there's no way I can use it. Under Network Settings all looks good, I get an DHCP adress, green lights everywhere but It is only constantly switching on and off. 😞 I have been searching the internet countless hours for a solution. So far without any success ! On one of these sites someone talked about wrong DisableIoMapper setting and VT-D enable/disable in Bios, I played around with various settings but no... no joy ! Do you guys use the ethernet ? Is it working for you OOB ? Thanks for any thoughts & recommendations. Link to comment https://www.insanelymac.com/forum/topic/354586-guide-macos-13-ventura-with-opencore-086-on-z390-aorus-elite-amd-rx-6600-or-intel-uhd-630/page/2/#findComment-2804879 Share on other sites More sharing options...
Recommended Posts