Shaneee Posted June 28, 2020 Share Posted June 28, 2020 Well it's here folks. macOS Big Sur on AMD. Thanks to Algrey for the base patches and NoOne for the Big Sur updates. Absolutely no support will be given for this for the time being as it's the very first beta and is understandably buggy and unstable. Experimental patches for 17h CPUs can be found here, https://github.com/AMD-OSX/AMD_Vanilla/tree/experimental-opencore Note that there's no way to boot the installer using these patches. A VM must be used to install. You'll have to work it out by your self. From my testing everything is working as it should currently. I've got all iServices working including iMessage. Sleep works without modification etc. 7 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 28, 2020 Share Posted June 28, 2020 Nice! 1 Link to comment Share on other sites More sharing options...
iCanaro Posted June 28, 2020 Share Posted June 28, 2020 my T-RyZo ringrazia 3 Link to comment Share on other sites More sharing options...
iCanaro Posted July 8, 2020 Share Posted July 8, 2020 (edited) beta 2 update from beta 1 OC 0.6.0 & kexts compiled 08-07-2020 boot-args --> vsmcgen=1 -lilubetaall kexts AMDPowerGadget disable for install update beta 2 Spoiler Edited July 8, 2020 by iCanaro 1 Link to comment Share on other sites More sharing options...
iCanaro Posted July 23, 2020 Share Posted July 23, 2020 BigPurge beta 3 OC 060 & kexts compiled today performed installation with the minimum union of kexts LILU, WEG, VirtualSMC, RTL8111 The thing that made me waste my time was the not having used the boot-arg right away vsmcgen-1 and the RTL8111 that even if I disabled it, however BS saw it, interfered and looped; instead using the 230d10 version compiled at the moment, it's all spun then smooth 4 reboots and it wasn't even as long as installation on SSD apart from the Preboot instead of the name given to the disc, which you see in the GUI at the boot, finally you start to see something interesting... fluid and responsive system right away, graphics finally defined and not that obfusca of the first two betas 1 Link to comment Share on other sites More sharing options...
Shaneee Posted July 24, 2020 Author Share Posted July 24, 2020 @iCanaro Also updated just fine You can change the boot name with this, https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/?do=findComment&comment=2731516 2 Link to comment Share on other sites More sharing options...
iCanaro Posted July 25, 2020 Share Posted July 25, 2020 @Shaneee I have to be nice to bigsur beta3... today at the first restart, without doing anything that in the settings, only installed xcode and made a ride to OC EFI maker of the Gengik84, as I said, on the restart, in the GUI instead of preboot put me alone the name I had assigned to the disk we'll have a macOS that does a little bit of that caxxo that he likes or what??? Link to comment Share on other sites More sharing options...
Loloflat6 Posted July 26, 2020 Share Posted July 26, 2020 (edited) Big Sur Beta 3 Thanks @Shaneee here , and @iCanaro in the [pre-release] macOS Big Sur thread , to point me in the right direction. Spoiler Edited July 26, 2020 by Loloflat6 2 Link to comment Share on other sites More sharing options...
iCanaro Posted July 26, 2020 Share Posted July 26, 2020 (edited) o macaque people! hear you hear! Habemus Clover!!!! today for the first time ever, on the T-RyZo with Clover 5121 - OcQuirks and OpenRuntime all release nightly, before I came out of the +++++++++++++++ at boot.... what never happened and on the second attempt, after having a moment set the config, I even got to desktop on High Sierra https://www.macos86.it/topic/1948-t-ryzo-3950x-msi-unify-arez56-hs-mojave-catalina-bigsur/?do=findComment&comment=81216 bootlog.txt.zip for those who want to start trying their hand and maybe improve and evolve what they have done, here is the EFI EFI_CLOVER_X570_MSI_UNIFY.zip PS: final report with this EFI ✅ high sierra --> OK ❌ mojave --> black screen and reboot ✅ catalina--> OK ❌ big sur --> hangs at boot Edited July 26, 2020 by iCanaro Link to comment Share on other sites More sharing options...
iCanaro Posted August 4, 2020 Share Posted August 4, 2020 Big Sur beta 4 T-RyZo OC 060 1 Link to comment Share on other sites More sharing options...
jsl2000 Posted August 10, 2020 Share Posted August 10, 2020 (edited) On 8/5/2020 at 6:34 AM, iCanaro said: Big Sur beta 4 T-RyZo OC 060 Can you share your working OpenCore config.plist for Big Sur beta 4 in your Ryzen hackintosh ? Is there any change from Big Sur beta 3 to beta 4 in your OC's config.plist ? In my FX-6300 hackintosh previous working config.plist for Big Sur beta 3 not working at beta 4 now. your OC's config.plist On 7/25/2020 at 7:21 AM, Shaneee said: @iCanaro Also updated just fine You can change the boot name with this, https://www.insanelymac.com/forum/topic/344428-pre-release-macos-big-sur/?do=findComment&comment=2731516 Can you share your working OpenCore config.plist for Big Sur beta 4 in your Ryzen hackintosh ? Is there any change from Big Sur beta 3 to beta 4 in your OC's config.plist ? In my FX-6300 hackintosh previous working config.plist for Big Sur beta 3 not working at beta 4 now. Edited August 10, 2020 by jsl2000 Link to comment Share on other sites More sharing options...
iCanaro Posted August 10, 2020 Share Posted August 10, 2020 3 hours ago, jsl2000 said: Can you share your working OpenCore config.plist for Big Sur beta 4 in your Ryzen hackintosh ? yes config.plist T-RyZo.zip 1 Link to comment Share on other sites More sharing options...
seyedhossein Posted August 10, 2020 Share Posted August 10, 2020 (edited) Hi ... Boot in Catalina and Big Sur Beta 3 without any Error Have Panic on boot Big Sur beta 4: IONVMeController ... Any Idea? Regards Edited August 10, 2020 by seyedhossein Link to comment Share on other sites More sharing options...
iCanaro Posted August 10, 2020 Share Posted August 10, 2020 3 minutes ago, seyedhossein said: Hi ... Have Panic on boot Big Sur beta 4: IONVMeController ... Any Idea https://github.com/acidanthera/NVMeFix/releases/tag/1.0.3 Link to comment Share on other sites More sharing options...
jsl2000 Posted August 10, 2020 Share Posted August 10, 2020 (edited) 1 hour ago, iCanaro said: yes config.plist T-RyZo.zip Thanks which provide me the correct way to edit my config.plist in FX-6300 hackintosh. Now it can boot to desktop without major issues except CMOS reset after wake-up from S3 sleep. In previous Big Sur beta no such an issue with OpenCore 0.6.0. In Clover no such an issue at Big Sur beta 3 too. Edited August 10, 2020 by jsl2000 1 Link to comment Share on other sites More sharing options...
seyedhossein Posted August 10, 2020 Share Posted August 10, 2020 (edited) 1 hour ago, iCanaro said: https://github.com/acidanthera/NVMeFix/releases/tag/1.0.3 Already Try But Nothing change, Try another config.plist, also have problem in Big Sur beta 4 Boot in Catalina and Big Sur Beta 3 without any Error please help Regards Edited August 10, 2020 by seyedhossein Link to comment Share on other sites More sharing options...
seyedhossein Posted August 10, 2020 Share Posted August 10, 2020 (edited) 2 hours ago, iCanaro said: yes config.plist T-RyZo.zip Try your config.plist, but also I have Error on boot, Boot in Catalina and Big Sur Beta 3 without any Error, You use any NVMeFix.kext? Can share EFI Folder? Thanks Edited August 10, 2020 by seyedhossein Link to comment Share on other sites More sharing options...
jsl2000 Posted August 10, 2020 Share Posted August 10, 2020 1 hour ago, seyedhossein said: Try your config.plist, but also I have Error on boot, Boot in Catalina and Big Sur Beta 3 without any Error, You use any NVMeFix.kext? Can share EFI Folder? Thanks Although it was said that NvmExpressDxe.efi has been merged in OpenRuntime.efi, my experience showed that in those MB without NVME natively supported such as Z87 or Z77 I still need add NvmExpressDxe.efi in Drivers & config.plist. So please try it to see any difference ! Link to comment Share on other sites More sharing options...
Shaneee Posted August 10, 2020 Author Share Posted August 10, 2020 @jsl2000 I made no changes to my EFI. Only built OC and kexts from source. 1 Link to comment Share on other sites More sharing options...
jsl2000 Posted August 11, 2020 Share Posted August 11, 2020 9 hours ago, Shaneee said: @jsl2000 I made no changes to my EFI. Only built OC and kexts from source. In order to boot to desktop at Big Sur beta 4 I need add newer RealtekRTL8111.kext (v.2.3.0d10) to Kexts and edit config.plist. Link to comment Share on other sites More sharing options...
Shaneee Posted August 11, 2020 Author Share Posted August 11, 2020 8 minutes ago, jsl2000 said: In order to boot to desktop at Big Sur beta 4 I need add newer RealtekRTL8111.kext (v.2.3.0d10) to Kexts and edit config.plist. I've been using that version for a while now. I keep Lilu and it's plugins updated as much as I can and test new builds of OC on a USB first to ensure it won't break boot on AMD. 1 Link to comment Share on other sites More sharing options...
jsl2000 Posted August 11, 2020 Share Posted August 11, 2020 18 minutes ago, Shaneee said: I've been using that version for a while now. I keep Lilu and it's plugins updated as much as I can and test new builds of OC on a USB first to ensure it won't break boot on AMD. Ya, that's the best way I should follow yours ! Link to comment Share on other sites More sharing options...
Shaneee Posted August 11, 2020 Author Share Posted August 11, 2020 2 minutes ago, jsl2000 said: Ya, that's the best way I should follow yours ! My OC Version - 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:opencore-version REL-061-2020-08-11 Big Sur is now my daily. Sleep works along with iServices and everything that I use. Latest PS with same fixes still works. 1 Link to comment Share on other sites More sharing options...
jsl2000 Posted August 11, 2020 Share Posted August 11, 2020 (edited) 1 hour ago, Shaneee said: My OC Version - 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:opencore-version REL-061-2020-08-11 Big Sur is now my daily. Sleep works along with iServices and everything that I use. Latest PS with same fixes still works. Can you wake up properly from S3 sleep without black screen issue ? My Ryzen 1700X hackintosh still had this issue at Catalina and Big Sur with AMD 7970 or 7950 GPU. But FX-6300 hackintosh with RX-560 GPU had no such an issue except need wake-failure fix method to prevent CMOS Reset after reboot. Edited August 11, 2020 by jsl2000 Link to comment Share on other sites More sharing options...
Shaneee Posted August 11, 2020 Author Share Posted August 11, 2020 @jsl2000 Yes it'll wake without issues from GPU or even USB. All works fine. Link to comment Share on other sites More sharing options...
Recommended Posts