BibouI Posted July 29, 2018 Share Posted July 29, 2018 (edited) Mr RehabMan, and all the people they can helpI have installed 10.12.6 and i did the graphic card and everything is okey till i choose to remove everything and do frech install with 10.13 cuz it's new and some programs dosnt work on 10.12.6The problem is since i installed frech and clean osx and I did my graphic card in Clover configMy hackintosh read it but it gives me glitches, slow opeing programs and here some picturesI have tried to install whatevergreen + liul in Kext/other nothing works it read it but still glitches everywhere and espicaly when i open final cut pro or whatsapp even the picture of my contact it's like with pixels or somethingI have tried to install Intelgraphicfixup.kext+ liul and nothing works as well I have tried it in clover/kext/other nothing works i have tried in library/extenetion nothing works, i have tried in S/L/E nothing works as wellI inject INtel and UIEDD or something like and here is some pictures to see the suffring that i am livingI inject my Clover with 04128086IG Platform is : 0X0d220003~My device is: HP Probook 650 G1Graphic card is: 4600 IntelI set in bios: 64MB, 128MB, 512MB (nothing works) but now i set on 64MBRAM:8 GBNo external Monitorand u cam find my EFI in the attachment (Please take a look on all of my attachment to see the situation)Please help Archive.zip Edited July 29, 2018 by BibouI Link to comment Share on other sites More sharing options...
BibouI Posted July 29, 2018 Author Share Posted July 29, 2018 (edited) Hello first of all thanks for your reply i've done everything u say and i have the same problem i installed kext/other : Rehabman's FakePCIID + FakePCIID_Intel_HD_Graphics i inject my dst to what u gave me i choose macbookpro 11.1 i still have the same issue actually nothing change... Edited July 29, 2018 by BibouI Link to comment Share on other sites More sharing options...
BibouI Posted July 29, 2018 Author Share Posted July 29, 2018 (edited) That's bad how can i load it...I have attached IOREG output and (picture) i didnt know how to to get ''SysProfiler output'' u mean this one (in the attachment) ?? And Yes I confirm i inject it only in clover/kext/other tho before i've tried to inject it in S/L/E and L/E nothing works so i removed it and i kept only in clover/kext/other please help me and thanks IOREG.rar Edited July 29, 2018 by BibouI Link to comment Share on other sites More sharing options...
BibouI Posted July 29, 2018 Author Share Posted July 29, 2018 I am sorry i will clean my reply... Here is my sysprofiler and last thing how can i patch the dst that u gave me to mt dst in my clover ? MacBook Pro info.spx Link to comment Share on other sites More sharing options...
BibouI Posted July 29, 2018 Author Share Posted July 29, 2018 (edited) No, it shows me '' Built-in display '' not an external monitor... the other thing after i change to your config that u attach it to me it stuck when i choose to boot from my mac without any error or anything...i will try to to change it my last config i dont know if it's from the new config or from the dst.aml... Ok i will do what u have adviced me And check if i can boot again or not Thank u please bare with me Edited July 29, 2018 by BibouI Link to comment Share on other sites More sharing options...
BibouI Posted July 29, 2018 Author Share Posted July 29, 2018 (edited) Hello again my system wont boot and i found out why cuz the new dst.aml that u told me to put it next to dst i thought first from the new config that u gave me but when i changed it to my config also i cant boot but when i change it to your config and i removd dst.aml that u gave me system boot again and i've removed nullcpu and the duplicate kext u can check my sysprofiler in the attachment but i still have the same problem my graphic card glitch and flickring ect.... (just for the information i inject liul + whatevergreen in my kext/other i didnt put it in any other L/E or /s/l/e) MacBook Proinfoo.rar Edited July 29, 2018 by BibouI Link to comment Share on other sites More sharing options...
BibouI Posted July 29, 2018 Author Share Posted July 29, 2018 Yes it is... Link to comment Share on other sites More sharing options...
BibouI Posted July 29, 2018 Author Share Posted July 29, 2018 I understand can u help me for the steps to do after i install vanilla osx ? To do the right thing ?? and thank u Link to comment Share on other sites More sharing options...
Allan Posted July 29, 2018 Share Posted July 29, 2018 You can use this: [Guide] Sierra / High Sierra / Mojave on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell And download one of the Olarila images Link to comment Share on other sites More sharing options...
BibouI Posted July 31, 2018 Author Share Posted July 31, 2018 (edited) On 7/29/2018 at 10:15 PM, Allan said: You can use this: [Guide] Sierra / High Sierra / Mojave on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell And download one of the Olarila images On 7/29/2018 at 8:10 PM, Hervé said: There are tons of guides that you'll easily find on this forum and others. Using your current limping installation, download latest High Sierra installation package off the AppStore, create a vanilla High Sierra USB installer using the well-known and widely available method, install Clover on it and add your system-specify files (patched ACPI tables, config.plist, kexts). Thank you to you all I installed a clean and vanilla version of OSx 10.13.3 Everything's fine when i installed my graphic card i have the same issue but i figured a temporary solution when i scaled my screen to 1600X or 1366X or 1024 all the glitches disappear and no problem at all but is there any solution to work with full resolution ???? Secondly i mange to work my Bluetooth and everything expect my battery status and my brightness cuz i'am noob when it comes to dst patch and things like that please if u could do a favour and guide me with it and about my battery statues doesn't show me anything about it so is there any solution to manage my battery and to know the percentage etc... Thank youuuu very much and i hope u can help me @Hervé @Allan Edited July 31, 2018 by BibouI 1 Link to comment Share on other sites More sharing options...
BibouI Posted July 31, 2018 Author Share Posted July 31, 2018 Do i only need to install acpi battery to L/E or to other/kextvand without any dst patch ?! Yes graphic acceleration i have the transparency in my osx i think that means ny graphic acceleration is on ?? Link to comment Share on other sites More sharing options...
BibouI Posted July 31, 2018 Author Share Posted July 31, 2018 I have installed acpibattery via utility kext nothing works still the same issue about the battery... Link to comment Share on other sites More sharing options...
BibouI Posted July 31, 2018 Author Share Posted July 31, 2018 Please any help and i promise anyone he'll help me i'll donate to him cuz this problems i can't fix it whatever i tried to... Link to comment Share on other sites More sharing options...
Recommended Posts