Jump to content
felixaa

stuck on ACPI Exception AE_NOT_FOUND ... in a Acer Aspire 5741g

6 posts in this topic

Recommended Posts

Hi there!

I had been trying install High Sierra in a working Laptop with ElCapitan.
The model is an "Acer Aspire 5741g with ATI Mobility Radeon HD 5470 and Core i3-330M"

As I've said before, this setup is working realy fine with ElCapitan:
- ATI Radeon HD 5470 framebuffer/InjectEDID/... set in Clover
- SMBIOS MacBookPro6,2
- sleep/wakeup
- Fn keys: Volume, Mute, Brightness

I trying to boot with High Sierra USB Installer but always it's stuck on this point ...

ACPI Exception: AE_NOT_FOUND ...
What I can do next??

Thanks pals.

post-25195-0-04880600-1512675885_thumb.jpg

config.plist.zip

Share this post


Link to post
Share on other sites
Advertisement

wow!

@artur_pt thanks!!!, your config.plist do the trick ... I could boot and install macOS

 

I compare your config.plist with mine and just wanna know what make it work.

In yours:

 -- Fixes are disable

 -- Patches are disable

 -- DropTables are disable

 -- HaltEnabler has Generate > CStates and PStates   to "true"

 -- Removed BootGraphics

 -- Removed ScreenResolution

 -- CsrActiveConfig is at 0x67 from original (0x3E7)

 

Which are the settings that prevent  the "ACPI Exception AE_NOT_FOUND" error??

 

Thanks a ton man

Share this post


Link to post
Share on other sites

hello

 

maybe is all the patches and fixes u have apply to the config ...

 

before u are using a general config .. clover need a custom config for the specific hardware he try to boot

 

that's why I post the link to the clover wiki .. make a easy config .. what u don't know .. don't use or enable ..

 

clover will do that for u ..

 

good hack

Share this post


Link to post
Share on other sites

@artur_pt what touchpad solution work with this laptop?  Acer Aspire 5741G is similar to your "P. B. TM 86"

 

I can´t get "tap" nor "two finger" gestures and trackpad pref pane is disabled with Rehabman Voodoo PS2 keyboard/mouse.

 

It used to work on ElCapitan

 

Do you have gestures or tap??

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      AppleAHCIPort.kext v328 from High Sierra PB1_17A291m.
       
      Info.plist has been edited so Bundle version is 999.1.1 ---> give higher priority loading in kernel cache/pre-linked kernel than v329 from later betas/GM. Need to disable SIP (since editing info.plist invalidates Apple's kext signature).
       
      Install in /Library/Extensions (so doesn't get over-written during updates) repair permissions, rebuild caches eg
      sudo chown -R 0:0 /Library/Extensions/AppleAHCIPort.kext && sudo chmod -R 755 /Library/Extensions/AppleAHCIPort.kext sudo touch /System/Library/Extensions && sudo kextcache -u /   Test kext is loadable...
      sudo kextutil -tn /Library/Extensions/AppleAHCIPort.kext   Confirm kext is loaded after rebooting the system...
      kextstat | grep AHCIPort   To use with a USB installer, the kext needs to be included in the prelinkedkernel. Use PLK.tool attached to post#13 to create a new prelinkedkernel with AppleAHCIPort.kext v328, then replace original prelinkedkernel in the installer - post#16.
    • By moman2000
      Hi,
       
      I thought it would be nice that I would be the first here to give my experience with getting Mojave running and mostly working on my system.
       
      My specifications are as follows:
       
      iMac 14,2
       
      GIGABYTE GA-Z97X-UD5H / Intel Core i7-4770k @ 4.4GHz / 16GB Corsair Vengeance DDR3 @ 1600MHz
      MSI AMD Radeon HD 7870 2GB OC
      250GB SanDisk Ultra 3D NAND SSD / 120GB OCZ Agility 3 SSD
      1TB 5.4K HDD
       
      I used the config that @MaLd0n helped me with. Seriously, he is a legend. HERE is my Clover Config including everything I use for 10.13 High Sierra and 10.14 Mojave.
       
      Installation Procedure:
       
       
      Create bootable USB media with createinstallmedia - sudo /Applications/Install\ macOS\ 10.14\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/"Insert Volume Name here"  ***** Remove quotation marks!!! 
       
      **"--Applicationpath" is now depreciated and should not be used when making a 10.14 Mojave USB. I do not know if this will change in upcoming releases.
       
      ** ConvertToAPFS is now depreciated and no longer works when installing 10.14 Mojave beta 1. Using the command "--converttoapfs NO" will not work if you use it with "createinstallmedia".
       
      Editing "minstallconfig.xml" within the "macOS Install Data" folder on the target partition chosen during installation to change "ConvertToAPFS" from "TRUE" to "FALSE" would also not disable APFS conversion.
       
      Installation ran through well, but it did restart just after installation began which seemed to have been caused by a crash, but it seemed like it was normal as this happened twice as I tried installing Mojave earlier and the same thing happened. Rebooting again into the installation on the target drive that was selected before described as "macOS Install"  and named "macOS 10.14" resumed installation.
       
      Everything from then on was easy and smooth. I set-up my iCloud and things as such and was brought to the desktop of macOS 10.14 Mojave!
       
       
      What does work:
       
      Graphics (Acceleration/Metal) // 4K video dropped 0 frames // Picture-in-Picture
      Mouse and Keyboard
      USB 3.0 -  Full 5 GBP/s - Only ports above HDMI Port and front I/O
      USB 3.0 under both Intel and Killer Ethernet ports function with USB 2.0 devices.
      Ethernet (only Intel NIC so far) Both NIC's work, Intel I217-V and Killer E2200
      iMessage
      Sleep and Wake
      Shutdown
      Restart
       
      Update #1:
       
      Temporary Fix: ***I have gotten audio to work after browsing Reddit, I stumbled across this post: https://www.reddit.com/r/hackintosh/comments/8orn7w/mojave_files_needed/e05kkj9/
       
      Update #2:
       
      I have just found a kext for the on-board Killer E2200 NIC after searching with device and vendor ID's on this forum.
      https://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/
       
      Update #3:
       
      Audio is now fully operational with new version 1.2.8 of AppleALC, from here: 
       
      What does NOT work:
       
      USB 3 under Intel I217-V NIC and Killer E2200 NIC Ethernet Ports // Only function with USB 2.0 devices.
      Audio Temporary fix in Update #1 above   Fixed in Update #3
      Killer E2200 NIC Fixed in Update #2 above
       
       
       
      This is the information I have been able to gather thus far whilst using Mojave.
       
      I hope this helps someone in getting Mojave running on their system.
       
      Regards,
      Mohamed
       
       
      CLOVER_moman2000 No SN.zip







    • By crazybirdy
      Patched OSInstaller.framework to allow macOS 10.13 installation on MBR partition.
       
      To use those patched files you must follow HowTo-10.13.x to create an USB installer. You can't just run the app downloaded from Mac App Store.
       
      The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.13 Firmware check by crazybirdy.
       
      What is this patched OSInstaller doing?
      1. Patch the MBR check, allow macOS 10.14 installation on MBR partition.
      2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware".
      3. This patched MBR OSInstaller method works with both MBR and GPT partition (GPT+recovery).

      No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch.
       
      How to make 10.13 installer for MBR?
      Read HowTo-10.13.x.txt inside the zip file first, different with 10.12.
      Read HowTo Q/A Q7. How to install in different computer with only one USB partition?
      Read HowTo Q/A Q8. How to update 10.13.x combo-update to MBR without downloading the full installer app again?
      Read HowTo Q/A Q9. How to update 10.13.x combo-update to MBR and GPT with installScript directly?
       
      Just use 13MBRinstallerMaker to make installer, it works with both MBR and GPT.
       
      And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist.
       
    • By fusion71au
      Clover r4542 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 14 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4542 for VMware.zip". Mount Clover-v2.4k-4542-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By rvxtm
      Hello,
       
      Maybe i am the only one seeing this or maybe i am doing something wrong but my resize animation performance in HS 10.13.5 is terrible.
      I did a clean install of 10.13.5, installed the latest nvidia drivers 387.10.10.10.35.106. 
      My GPU is a GTX1060 connected via DP to a 4k display.
      Now, the issue, when i open an empty TextEdit for example, if i drag the corner of the window to make it larger, it lags more and more as the size increases.
      I also have Adobe Audition CC installed for my work, the interface is very slow compared to the windows version (my 2011 macbook pro is much faster, but it's not 4k).
      Is there a known issue when running 4k on nvidia web drivers ?
      It's very frustrating because i've been using custom machines with 1080p displays and nvidia cards since Snow Leopard, but i was always butter smooth.
       
      Thanks.
       
×