Jump to content
neterosensei

Samsung Galaxy Book 12

3 posts in this topic

Recommended Posts

 Hey there !

I would like to install sierra on my Galaxy Book 12 inch!!

Specs

i5 7200u 

HD 620

1440p res

SSD sata3

USB c ports

WIFI ATHEROS/QUALCOMM QCA6174 

 

Its a 2 in 1 convertible laptop! So its detachable and also i can use it with a keyboard!

 

Can i install osx sierra or high sierra on this?

Actually im tryinh to install but i get thoose errors 

 

cartellaEFI.zip

post-2245691-0-73360800-1507891748_thumb.jpg

 

Share this post


Link to post
Share on other sites
Advertisement

Installing HS is quite possible but your configurations is lacking something.

You ave to add apfs.efi in driver64uefi and this kext in other:

IntelGraphicsDVMTFixUP

lilu and IntelGraphicsFixup.kext are outdated, change with the newer versions:

Lilu

IntelGraphicsFixUP

In EFI/CLOVER/ACPI/patched put the attached DSDT and SSDT-

You have to trim your config.plist:

In the ACPI section enable change H_EC to EC

In the Boot section enable  "-disablegfxfirmware"

In the SMBIOS section create a profile for MacBookPro14,1 and click some times on Generate New Serial Number.

Now you can installa HS on your hybrid but remember that other then OS X nothing is working and no solution till now. No audio, backlight, batterymangement, incompatible WiFi

DSDT.aml.zip

SSDT.aml.zip

apfs.efi.zip

Share this post


Link to post
Share on other sites
Posted (edited)

I got to the installation screen here, but then I get the error about recovery server not connected. How do you get past this since this computer can't connect to the internet?

 

IMG_20180320_124038.jpg

Edited by briwil
Added photo

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Angelo_
      I jusst bought a 500gb crucial mx500 to see wheter the slow response of my hackintosh was due to the old 2.5" 500gb wd black hdd that i savaged from a broken laptop at home to install osx the first time but i don't know how to transfer my datas, os, programs and bootloader on the new drive since crucial only shows how to clone the drive but doesn't (obiously) refer to the clover boot partition, how can i do that?
      and what filesystem should i use? apfs or hfs+?
      I can also use windows or linux programs since i'm on a triple boot setup
    • By MaLd0n
      Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By bell47
      Hello
       
      I'm French, so excuse me for the approximate language......

      I was on Mountain Lion without problems and I installed a new Sierra system with Clover and rebooted with the key but when I remove the Clover USB key no longer "sees" my hard drive.
      "loading operating system" then black screen.
      Anybody got any ideas?
      Thank you
       
      Gigabyte H61N-USB3 F8
       Intel Core i5
       Mémory    8 Go
       
    • By iammask
      Requirements
      Pendrive 2.0 (>=8GB) "Install macOS Sierra app" (https://itunes.apple.com/de/app/macos-sierra/id1127487414?l=en)(Around 5GB) Working Mac  
      Installing Clover to USB
      Get a USB 2.0 Pendrive (8GB and above)
      Before you can partition the USB, you must determine what the disk identifier is. With the USB plugged in to the computer, use 'diskutil list':

      In Terminal:
      diskutil list In my case, output:
      /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage MacOS 500.4 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s5 4: Microsoft Basic Data DATA 498.8 GB disk0s4 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: Pendrive *8.0 GB disk1 As you can see my pendrive is available at /dev/disk1 (check yours).
      Now we are going to create partitions, In Terminal:
      diskutil partitionDisk /dev/disk1 1 GPT HFS+J "install_macos" R Output:
      Started partitioning on disk1 Unmounting disk Creating the partition map Waiting for the disks to reappear Formatting disk1s2 as Mac OS Extended (Journaled) with name install_osx Initialized /dev/rdisk1s2 as a 7 GB case-insensitive HFS Plus volume with a 8192k journal Mounting disk Finished partitioning on disk1 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *8.0 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Apple_HFS install_macos 7.7 GB disk1s2 Now as you can see partitions are created and your pendrive is ready to install clover.
      Download the Clover installer. Current builds are available on sourceforge: http://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded) 
      After Downloading the Clover installer,
      Install it to the Target "install_macos" partition  using "Change Install Location". Select "Customize". Check "Install for UEFI booting only", "Install Clover in the ESP" will automatically selected. Check "BGM" from Themes. Check "AptioMemoryFix.efi", "EmuVariableUefi-64.efi", "OsxFatBinaryDrv-64.efi" from Drivers64UEFI. After making your selections, Click "Install". Finally, one more EFI driver is needed, HFSPlus.efi:
      Download from : https://github.com/JrCs/CloverGrowerPro/raw/master/Files/HFSPlus/X64/HFSPlus.efi. Copy to /EFI/Clover/drivers64UEFI.  
      Kext Setup
      Remove all folders from EFI/CLOVER/kexts/ except 'Other'. Now Download These, FakeSMC.kext: https://github.com/RehabMan/OS-X-FakeSMC-kozlek VoodooPS2Controller.kext: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller USBInjectAll.kext: https://github.com/RehabMan/OS-X-USB-Inject-All Lilu.kext: https://github.com/vit9696/Lilu IntelGraphicsFixup.kext: https://github.com/lvs1974/IntelGraphicsFixup RealtekRTL8100.kext: https://www.insanelymac.com/forum/files/file/259-realtekrtl8100-binary/  
      Setting config.plist
      Download it from the attachments, Unzip and replace EFI/CLOVER/config.plist
       
      Building the MacOS Installer
      In Terminal : 
      sudo "/Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia" --volume /Volumes/install_macos --applicationpath "/Applications/Install macOS Sierra.app" --nointeraction sudo diskutil rename "Install macOS Sierra" install_macos Now your Bootable USB is ready to install. Turn off your Laptop.
       
      Installing 
      Make sure you have adequate bios settings
       
      Then Follow:
      Power on laptop with pendrive connected to it. Continuously press "ESC". Select "Boot From USB" (i.e. F9) and select pendrive from the menu. Now it boots into Clover, with left-right arrow, select options. Select "Graphics Injector Menu". Under "Inject Intel" select "FakeID" and replace "0x00000000" to "0x12345678". Now return to main screen and select "install_macos". When grey screen comes, select DiskUtility. Format whole Hard Disk as "Mac Os Extended (Journaled)" with Name as "MacOS" Now quit DiskUtility and click "Install Mac OS Sierra" and select the newly created partition in previous step. Now installer will begin installing files (~15-20mins) and the restart. After restart again boot into clover(Follow Step 1-5) and again select "install_macos". Now Install screen will appear and continue installation. This time installer will install files to your target partition and create Recovery HD partition. Later on restarts. After restart again boot into clover(Follow Step 1-5) and again select "MacOS". If everything goes well, you will finish up the installation process and arrive at the Mac OS Sierra desktop.  
      Install clover to hdd.
      Congratulations!! Your Installation is complete!! 
      Now you need to fix things one by one.
       
      Will Provide fixes when I get time.
      config.plist.zip
×