MacPeet Posted July 16, 2015 Share Posted July 16, 2015 Again via KextUtility and two reboots, then it should work Link to comment Share on other sites More sharing options...
nhox.blue Posted July 16, 2015 Share Posted July 16, 2015 Again via KextUtility and two reboots, then it should work I tried but sadly it still don't work. Link to comment Share on other sites More sharing options...
MacPeet Posted July 16, 2015 Share Posted July 16, 2015 HPET and LPC ok in the DSDT and loaded? SBUS Device ID in DSDT? Link to comment Share on other sites More sharing options...
Mirone Posted July 16, 2015 Share Posted July 16, 2015 Apply this patch in your DSDT: https://github.com/RehabMan/Laptop-DSDT-Patch/blob/master/system/system_IRQ.txt Link to comment Share on other sites More sharing options...
nhox.blue Posted July 17, 2015 Share Posted July 17, 2015 thank you two, MacPeet and Mirone, I don't really understand what HPET & LPC are, and DSDT has many errors when compile. So I think I'll spend some time to find some instruction to patchAppleHDA manually and then I'll do your tricks. Link to comment Share on other sites More sharing options...
MacPeet Posted July 17, 2015 Share Posted July 17, 2015 @babibada Here are a few attempts for ext. Mic. via KextUtility and 1-2 reboots for the test Layout ID is 3 or HDAEnabler3.kext If it works please screenshots of System Configuration / Audio Edit: Kext deleted - no longer relevant 1 Link to comment Share on other sites More sharing options...
babibada Posted July 21, 2015 Author Share Posted July 21, 2015 Thank you sir I will try! Link to comment Share on other sites More sharing options...
phuanh004 Posted July 22, 2015 Share Posted July 22, 2015 @MacPeet Can u help me ! my ALC290 MICs doesnt work too. CODEC DUMP(1).zip Link to comment Share on other sites More sharing options...
MacPeet Posted July 22, 2015 Share Posted July 22, 2015 Please try the HDA's from Post 31 This is also a HP with ALC290 If not working then again here Report Link to comment Share on other sites More sharing options...
phuanh004 Posted July 22, 2015 Share Posted July 22, 2015 Please try the HDA's from Post 31 This is also a HP with ALC290 If not working then again here Report MICs and headphone in try6 kext working on my PC but Speaker not working. My old kext ( #33 ) working with speaker perfectly. Can you rebuild it for me. Thanks Link to comment Share on other sites More sharing options...
nhox.blue Posted July 22, 2015 Share Posted July 22, 2015 Hey, I tried AppleHDA #6 and it works perfectly, both my built in speaker/headphone and mic internal/ external work. thank you.here're some images: 1 Link to comment Share on other sites More sharing options...
MacPeet Posted July 22, 2015 Share Posted July 22, 2015 @nhox.blue working Speaker / headphone in Switch Mode for HP Envy 15t-k000??? @babibada try this EAPD_Sleep_Fix @phuanh004 try this Kext for hp m6 Layout-ID is 3 or HDAEnabler3.kext if it works, please info or screenshots Edit: @nhox.blue and @babibada please try this for switch mode mic/line AppleHDA_ALC290_HP_m6_n015_dx.kext.zip EAPDFix_HP_ENVY_15t_k000.kext.zip try_this_for_mic_line_switch_mode_AppleHDA_ALC290_HP_ENVY_15t_k000.kext.zip 2 Link to comment Share on other sites More sharing options...
nhox.blue Posted July 23, 2015 Share Posted July 23, 2015 @MacPeet: Ok, I tried "try_this_for_mic_line_switch_mode_AppleHDA_ALC290_HP_ENVY_15t_k000.kext.zip". Both output and input work in switch mode. Here're some images: Headphones not plugged in: Plugged in: Does it work perfectly?, I'm new so I don't know what original Mac like :lol: 1 Link to comment Share on other sites More sharing options...
MacPeet Posted July 23, 2015 Share Posted July 23, 2015 So it's perfect with automatic mode. 1 Link to comment Share on other sites More sharing options...
phuanh004 Posted July 23, 2015 Share Posted July 23, 2015 @phuanh004 try this Kext for hp m6 Layout-ID is 3 or HDAEnabler3.kext if it works, please info or screenshots It's perfect Thanks so much 1 Link to comment Share on other sites More sharing options...
MacPeet Posted July 23, 2015 Share Posted July 23, 2015 @phuanh004 also for you a version with switch mode mic / line input try_this_for_switch_mode_AppleHDA_ALC290_HP_m6_n015_dx.kext.zip 2 Link to comment Share on other sites More sharing options...
phuanh004 Posted July 23, 2015 Share Posted July 23, 2015 @phuanh004 also for you a version with switch mode mic / line input all done 1 Link to comment Share on other sites More sharing options...
Mirone Posted July 23, 2015 Share Posted July 23, 2015 Good job MacPeet, well now someone here could report If this works with ALC290?: Iphone headset (ComboJack, not only LineIn). I say this because in all codecs I already fix AppleHDA that There's ComboJack it does not work, or works only one or the other but MacPeet may have found the solution. Link to comment Share on other sites More sharing options...
babibada Posted July 23, 2015 Author Share Posted July 23, 2015 Good job MacPeet, well now someone here could report If this works with ALC290?: Iphone headset (ComboJack, not only LineIn). I say this because in all codecs I already fix AppleHDA that There's ComboJack it does not work, or works only one or the other but MacPeet may have found the solution. It works. Link to comment Share on other sites More sharing options...
Lost Star Posted July 23, 2015 Share Posted July 23, 2015 Good job MacPeet! I take a look at Phuanh004's codecdump and I see that you reversed all pathmaps of input and output devices. Pathmaps should usually be: Mic: 9 34 18 LineIn: 8 35 26 Headphone: 21 12 2 Speaker: 24 13 3 But in your kext, 9 34 18 is for LineIn, 8 35 26 for Mic and the pathmaps of output devices are reversed too. Is this the solution to make Mic work??? Link to comment Share on other sites More sharing options...
Mirone Posted July 23, 2015 Share Posted July 23, 2015 good news, I'll try for other codecs. Edit: Long ago I corrected one ALC290 and everything works even ComboJack, but only with Layout_ID = 1, tried for other codecs but no luck. Link to comment Share on other sites More sharing options...
Lost Star Posted July 23, 2015 Share Posted July 23, 2015 good news, I'll try for other codecs. Edit: Long ago I corrected one ALC290 and everything works even ComboJack, but only with Layout_ID = 1, tried for other codecs but no luck. Hi Mirone, I've patched many laptop codecs and I find out that Asus codecs with 1 combo jack, ALC233 for example, have only three verbs for headphone, speaker and microphone. It means that LineIn cannot work in any case. Have you figured out any solution to make external mic work? Link to comment Share on other sites More sharing options...
MacPeet Posted July 23, 2015 Share Posted July 23, 2015 @muxuxi No, both ports operate with both nodes. The order does not matter. Many computers only work with MuteGPIO=0 (Layout.xml) for mic and line input. I think this was the solution in the HP's ALC290. Link to comment Share on other sites More sharing options...
Lost Star Posted July 23, 2015 Share Posted July 23, 2015 @MacPeet Ok, I got it. Thank u so much for your explanation! Link to comment Share on other sites More sharing options...
babibada Posted July 23, 2015 Author Share Posted July 23, 2015 @MacPeet @Mirone Mics are works now. But the voice is really small, I tried SKYPE and my friends almost can't hear me. I already set the largest voice in the setting... Link to comment Share on other sites More sharing options...
Recommended Posts