Allan Posted May 26, 2015 Share Posted May 26, 2015 Agora você tem que seguir esses passos: Then we need to add the SCSI device id's to the following parts: - AnySDCardReaderAnySBC- Fake Apple Card Reader SCSI InjectFor this you also need IORegistryExplorer (download below if you don't have it).Open IORegistryExplorer and next insert a memory card (SD/MMC/...)Look under the EHCI parts for finding the memory card host controller (will be green because of card insertion).Under the device look for the IOSCSIPeripheralDeviceNub entry (below the USB device)Click on this and look for:- Vendor Identification- Product IdentificationChange these in the Info.plist to the values you see there (Fake Apple Card Reader SCSI Inject + AnySDCardReaderAnySBC) Link to comment Share on other sites More sharing options...
macinpc Posted May 26, 2015 Author Share Posted May 26, 2015 Allan, segui corretamente todos os passos. Pode analisar a AnyCardReader.kext.zip pra ver se cometi algum erro? Vid: 3034 Product Id: 297 Pelo kextstat vi que não esta nem carregando! Link to comment Share on other sites More sharing options...
Allan Posted May 26, 2015 Share Posted May 26, 2015 Está ok, mas você leu o que eu te falei a respeito do Leitor de Cartão PC vs Mac? Conferiu no seu Windows/Linux qual é a interface? Entenda que não vai adiantar gastar tempo inserindo informações sendo que o Hardware difere. Nesse caso, o Andy me explicou, leia a partir desse post: http://www.insanelymac.com/forum/topic/237068-usb-card-reader-apple-optimized-legacy-driver-1065106610671068/?p=2109286 Link to comment Share on other sites More sharing options...
macinpc Posted May 26, 2015 Author Share Posted May 26, 2015 Li sim, mas não entendi direito. Estou lendo e relendo .... fiz o boot pelo LiveUsb do Ubuntu e o leitor funcionou tranquilo, pode me explicar como confiro os valores Product e vendor id pelo ubuntu? Mais uma vez obrigado Link to comment Share on other sites More sharing options...
Allan Posted May 26, 2015 Share Posted May 26, 2015 No Ubuntu você não vai configurar nada, apenas vai verificar se a interface do Leitor é PCI ou USB. 99% que seja PCI. Pode usar o Sysinfo: sudo apt-get install sysinfo Ou o I-Nex sudo add-apt-repository ppa:i-nex-development-team/stable sudo apt-get update sudo apt-get install i-nex Então sobre o PCI que falei, a Apple não usa esse tipo de Leitor em seus Devices, somente leitor de cartão USB. Link to comment Share on other sites More sharing options...
macinpc Posted May 27, 2015 Author Share Posted May 27, 2015 Allan não to conseguindo instalar o sysinfo será que é pq estou usando o linux pelo liveusb? Tem outra maneira? Link to comment Share on other sites More sharing options...
Allan Posted May 27, 2015 Share Posted May 27, 2015 Tenta usar esse comando então: sudo lshw Você não tem o Windows instalado? Link to comment Share on other sites More sharing options...
macinpc Posted May 27, 2015 Author Share Posted May 27, 2015 Tenta usar esse comando então: sudo lshw Você não tem o Windows instalado? Não uso windows. Ja usei este comando e listou um monte de coisas, o que devo identificar? Link to comment Share on other sites More sharing options...
Allan Posted May 27, 2015 Share Posted May 27, 2015 Copia e cola aqui, precisamos especificadamente das informações do Leitor. Usa o "Code" para formatar os resultados. Link to comment Share on other sites More sharing options...
macinpc Posted May 27, 2015 Author Share Posted May 27, 2015 Aqui esta sysinfo_linux.zip Link to comment Share on other sites More sharing options...
Allan Posted May 27, 2015 Share Posted May 27, 2015 Tenta fazer um teste com algum cartão SD plugado. E poste aqui novamente. Link to comment Share on other sites More sharing options...
macinpc Posted May 27, 2015 Author Share Posted May 27, 2015 Chegou a placa wifi AR5B95 só tem um pequeno detalhe: não é compativel (slot diferente) com meu laptop. Caramba! Link to comment Share on other sites More sharing options...
Allan Posted May 27, 2015 Share Posted May 27, 2015 Poutz! Sinto muito cara Não tinha especificações antes? Link to comment Share on other sites More sharing options...
macinpc Posted May 27, 2015 Author Share Posted May 27, 2015 dell inspiron 14 serie 5000. É este patch que devo adicionar ao DSDT? into method label _PTS code_regex_not If\s\(LEqual\s\(Arg0,\s0x05\)\) code_regex ^((?:.|\n)*)$ replace_matchedbegin If (LEqual (Arg0, 0x05)) {}\n Else\n {\n %1 } end Pode me explicar como? Fiz boot pelo liveusb do ubuntu e usei o sudo lshw com o cartão de memoria no slot, aqui esta o resultado, poderia analisar para ver o device do card reader? sysinfo_linux.zip Será que tem algum outro cartão wifi que de pra usar no meu Dell Inspiron 14 serie 5000? Link to comment Share on other sites More sharing options...
Allan Posted May 28, 2015 Share Posted May 28, 2015 Este patch é com relação ao Shutdown? Não me lembro cara... Se realmente precisa dele, apenas abra o MaciASL e na opção "Patch" copie e cole o comando na caixa "Patch Text", feito isso aplica o patch e salve o DSDT. Link to comment Share on other sites More sharing options...
macinpc Posted May 28, 2015 Author Share Posted May 28, 2015 é sim do shutdown, as vezes desliga normalmente e outras não. O MaciASL vai identificar automaticamente em que parte do dsdt ele vai inserir o patch? Conseguiiu identificar o tipo (usb ou pci) do meu sd reader? obrigado Link to comment Share on other sites More sharing options...
Allan Posted May 28, 2015 Share Posted May 28, 2015 Se usar os Repos do RehabMan, vai notar que tem 2 patchs para o Shutdown. E sobre seu Leitor de Cartão, essas informações não exibiram o que eu queria. Usa esse comando: lsusb Quando você plugou seu cartão, ele apareceu na area de trabalho ou no Nautilus? Link to comment Share on other sites More sharing options...
macinpc Posted May 29, 2015 Author Share Posted May 29, 2015 repos RehabMan: Qual dos 2 utilizo? SD Reader Quando plugo ele aparece no dock a esquerda e tb abre uma janela. Aqui está o resultado (lsusb) t@it:~$ lsusbBus 001 Device 006: ID 0bda:5754 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 007: ID 0cf3:e005 Atheros Communications, Inc. Bus 001 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 05ac:0304 Apple, Inc. Optical USB Mouse [Mitsumi] Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Link to comment Share on other sites More sharing options...
Mirone Posted May 29, 2015 Share Posted May 29, 2015 Chegou a placa wifi AR5B95 só tem um pequeno detalhe: não é compativel (slot diferente) com meu laptop. Caramba! Screen Shot 2015-05-27 at 17.24.22.png Seu slot não é mini pci-express não? Link to comment Share on other sites More sharing options...
macinpc Posted May 29, 2015 Author Share Posted May 29, 2015 Mirone comprei esta que vc recomendou Link to comment Share on other sites More sharing options...
Allan Posted May 29, 2015 Share Posted May 29, 2015 repos RehabMan: Qual dos 2 utilizo? SD Reader Quando plugo ele aparece no dock a esquerda e tb abre uma janela. Aqui está o resultado (lsusb) t@it:~$ lsusbBus 001 Device 006: ID 0bda:5754 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 007: ID 0cf3:e005 Atheros Communications, Inc. Bus 001 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 05ac:0304 Apple, Inc. Optical USB Mouse [Mitsumi] Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ok. Agora vá em "Informações do Sistema" em seu OS X, dai poste um print da seção "USB". Link to comment Share on other sites More sharing options...
macinpc Posted May 29, 2015 Author Share Posted May 29, 2015 Link to comment Share on other sites More sharing options...
Allan Posted May 29, 2015 Share Posted May 29, 2015 Confirmado, realmente é um leitor PCI. Não tem como ativar no Hackintosh. Link to comment Share on other sites More sharing options...
macinpc Posted May 29, 2015 Author Share Posted May 29, 2015 Confirmado, realmente é um leitor PCI. Não tem como ativar no Hackintosh. Pode me explicar onde viu isso, gostaria de entender. Obrigado Link to comment Share on other sites More sharing options...
Allan Posted May 29, 2015 Share Posted May 29, 2015 A informação o OS X te dá diretamente, você pode comparar aqui: http://www.insanelymac.com/forum/topic/237068-usb-card-reader-apple-optimized-legacy-driver-1065106610671068/?p=2109286 E uma coisa bem interessante, nesses novos leitores, vamos dizer o SO só te diz que ele está lá quando você insere um cartão, caso não insira nada, é como se ele não existisse. No Windows você consegue "ver" isso. E notou que no campo "Current Required (mA)", informa que é desconhecido. Leia o que o Andy explicou sobre isso: Yep, I happen to know that "Device is not configured" happens when stuff goes wrong inside the driver. So a patch is required to force the card reader into 0xFA (250 * 2 mili amps) available... so that it doesn't give that... The driver needs 500 mili amps of power This method is Power Management related... So in those card readers one would need to patch the /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/AppleUSBCardReader.kext/Contents/MacOS/AppleUSBCardReader binary This actually shows where AppleUSBCardReader.kext is located... Link to comment Share on other sites More sharing options...
Recommended Posts