Jump to content

Need patched Intel GMA X3100 Kexts


Go to solution Solved by HUSABER,
23 posts in this topic

Recommended Posts

The kexts in "X3100 Backup" are the original kexts that HAVE QE/CI WITH the "MOUSE LAG" bug.

 

The kexts in "x3100_x86_64" are Snow Leopard 10.6.2 kexts that DON'T HAVE QE/CI WITHOUT the "MOUSE LAG".

 

I need QE/CI WITHOUT mouse lag.

 

I'm running Lion 10.7.4.

 

System Profiler:

 

Chipset Model: GMA X3100

Type: GPU

Bus: Built-In

VRAM (Total): 144 MB

Vendor: Intel (0x8086)

Device ID: 0x2a02

Revision ID: 0x000c

 

The kexts I've found online for Lion are for "Revision 3" and they do not work without "Revision C".

x3100_x86_64.zip

X3100 Backup.zip

Hi i have patched 3100 but this work only in 32bit.. :wink2: 64bit dont work with QE/CE

Recommended 32Bit in 64bit dont work...... :thumbsup_anim:

 

Can you upload all of them?

 

AppleIntelGMAX3100.kext

 

AppleIntelGMAX3100FB.kext

 

AppleIntelGMAX3100GA.plugin

 

AppleIntelGMAX3100GLDriver.bundle

 

AppleIntelGMAX3100VADriver.bundle

AppleIntegratedFrameBuffer.kext

 

Thanks!

Why?Yo need only this 2

Or you reinstall all your system kext for GMAx3100?and need all?

 

Those two you uploaded have different "Info.plist ID's". I don't think you can mix and match. I'll try the pack. Will report back in a minute.

This is the same from my extensions from last 30 min,see screen shot,i dont take never mishmash on my laptop :thumbsup_anim: but maybe you take....

I use a patched X3100FB kext for my X4500MHD GPU and I have never got QE/CI to work on SL or ML in either 32 or 64 bit

 

Does that tell that the QE/CI code is built specifically for X3100 (2a02) and can't work for another chip (2a42) ?

Need to change id and ven in info.plist inside in kext

X3100FB-im no shuar to work with X4500MHD GPU :worried_anim:

X3100FB works for X4500MHD by patching not only info.plist but every occurrence of the device ID within the code.

 

the problem as I see is that the kext you said enable QE/CI is a 32bit and ML doesn't have a 32bit kernel :wallbash:

  • 4 months later...

Hello sorry for my english I'm french and I need to install a kext for my chipset GMAX3100 I am a newbie in hackintosh

I have downloaded the links above to install the kext in Extra with kextwizard and repair disk permissions I still have no choice in the monitor :wacko:

 

I'm running OSX 10.8.2

With compacq cq 61 dual core

  • 5 months later...

Hello

I have the same Laptop Model Compaq CQ61 Cour2Duo (Graphics 4500MHD)

I downloaded   (10.7.4 32bit.X3100 Pack.zip) and installed with Kext wizard with no luck

I have Lion 10.7.4 , try boot with kernel flag arch=i386 GraphicsEnabler=Yes

I changed Device ID matches with my Device ID in the screenshot, but there is no QE/CI

can you help me , plz see my screenshot

 

thanks in advanced

post-765120-0-87712800-1372857112_thumb.png

  • 2 weeks later...

dont't try boot with kernel flag arch=i386,this is wrong..you boot on 64bit mode,right? :hysterical:

only need to add on to your org.chameleon.Boot.plist this one:

       <key>GraphicsEnabler</key>
          <string>Yes</string>

           <key>arch</key>
        <string>i386</string>

  • 3 months later...

Hello all,

 

I have tried all of the recommendations and methods in this post to get my GMA X3100 (HP Pavillion DV6000 - Intel) fully working on iATKOS L2 10.7.2 with QE/CI, but encountered the same mouse/video lag that many others have. I was almost ready to go back to using SL until it dawned on me...why not copy the kexts from my 10.6 install to my 10.7? I loaded iATKOS S3 version 2 and extracted the following using "Pacifist":

 

1) gma.pkg

2) natitintel.pkg

3) x3100.pkg

 

Note - I used Kext Utility after installing the above packages, the I restarted the PC.

 

I then copied these items to a USB drive and installed on my 10.7.2 setup, and now have fully (and I mean fully) working GMA X3100 on iATKOS L2. I will try these same pkg's on a retail 10.7 install and post the results. I will also post my Chameleon bootloader settings for reference. If someone needs these files, just PM me and I will send directly as they are all in a ZIP that is less than 1MB in size (easy to share). Keep up the good work gents!

 

Chameleon Bootloader Flags:

Added boot option: Instant Menu=Yes
Added boot option: arch=i386
Added boot option: EthernetBuiltIn=Yes
Added boot option: Kernel Flags=-f
Added boot option: Graphics Mode=1280x800x32

 

**I take no credit for any of the files I uploaded as they are sourced from iAtkos S3 V2**

 

Big thanks to Team Uphuck!

GMA X3100 Lion - QE & CI.zip

 

Hello all,

 

I have tried all of the recommendations and methods in this post to get my GMA X3100 (HP Pavillion DV6000 - Intel) fully working on iATKOS L2 10.7.2 with QE/CI, but encountered the same mouse/video lag that many others have. I was almost ready to go back to using SL until it dawned on me...why not copy the kexts from my 10.6 install to my 10.7? I loaded iATKOS S3 version 2 and extracted the following using "Pacifist":

 

1) gma.pkg

2) natitintel.pkg

3) x3100.pkg

 

Note - I used Kext Utility after installing the above packages, the I restarted the PC.

 

I then copied these items to a USB drive and installed on my 10.7.2 setup, and now have fully (and I mean fully) working GMA X3100 on iATKOS L2. I will try these same pkg's on a retail 10.7 install and post the results. I will also post my Chameleon bootloader settings for reference. If someone needs these files, just PM me and I will send directly as they are all in a ZIP that is less than 1MB in size (easy to share). Keep up the good work gents!

 

Chameleon Bootloader Flags:

Added boot option: Instant Menu=Yes

Added boot option: arch=i386

Added boot option: EthernetBuiltIn=Yes

Added boot option: Kernel Flags=-f

Added boot option: Graphics Mode=1280x800x32

 

**I take no credit for any of the files I uploaded as they are sourced from iAtkos S3 V2**

 

Big thanks to Team Uphuck!

 

COOL :hysterical:

  • 9 months later...

Why?Yo need only this 2

Or you reinstall all your system kext for GMAx3100?and need all?

Thanks a lot it works to me on Acer5920 Lion x3100 kext!!

Is the only x3100 kext for lion that work with QE/CI

 

Mac OSX Lion 10.7.X Intel GMA X3100 0x2a02 REV3 32Bits QE/CI

 

Download Link:Mac OSX Lion 10.7.X Intel GMA X3100 0x2a02 REV3 32Bits QE/CI

Mirror Download Link: https://mega.co.nz/#!yhh3zCZY!Q603On6Vc6xfKbmlXF0dBsZGAMHrDMiRXuE8S9L9vak

  • 4 months later...

Thanks a lot it works to me on Acer5920 Lion x3100 kext!!

Is the only x3100 kext for lion that work with QE/CI

 

Mac OSX Lion 10.7.X Intel GMA X3100 0x2a02 REV3 32Bits QE/CI

 

Download Link:Mac OSX Lion 10.7.X Intel GMA X3100 0x2a02 REV3 32Bits QE/CI

Mirror Download Link: https://mega.co.nz/#!yhh3zCZY!Q603On6Vc6xfKbmlXF0dBsZGAMHrDMiRXuE8S9L9vak

I've installed these kexts by kext utility (after removing originals with AppleIntelGMAX3100GA.plugin, AppleIntelGMAX3100GLDriver.bundle, AppleIntelGMAX3100VADriver.bundle and AppleIntelIntegratedFramebuffer.kext) but still got strip on display that split up the screen to 2 screens. GMA X3100 Device ID: 0x2a02 Revision ID: 0x0003 iAtkos L2 (Lion 10.7.2) booting in 32 bit mode (package). Does anyone face this problem or know the solution????

I've installed these kexts by kext utility (after removing originals with AppleIntelGMAX3100GA.plugin, AppleIntelGMAX3100GLDriver.bundle, AppleIntelGMAX3100VADriver.bundle and AppleIntelIntegratedFramebuffer.kext) but still got strip on display that split up the screen to 2 screens. GMA X3100 Device ID: 0x2a02 Revision ID: 0x0003 iAtkos L2 (Lion 10.7.2) booting in 32 bit mode (package). Does anyone face this problem or know the solution????

AAPL00,DualLink=0

If you are using Clover then in config.plist you may look into

	<key>Graphics</key>
	<dict>
		<key>DualLink</key>
		<integer>0</integer>
	</dict>

Or vise versa change to 1.

×
×
  • Create New...