Meu hardware roda o Lion?

Ricardo Guimarães · July 25, 2012

Olá a Todos amigos do Forum, este é o meu primeiro post aqui. Estou ansioso e muito intenciosado a fazer o meu primeiro hackintosh. Estou realmente cansado do Windows por diversos fatores. Bom mas vamos ao que importa, abaixo segue minha configuração e gostaria de saber o que devo fazer pra instalar o Os X.

Procesador: Intel Core 2 Quad Q8400 @ 2.66GHz - MMX, SSE (1, 2, 3, 3S, 4.1), EM64T, VT-x

Placa Mãe: Gigabyte G31M-S2C - Chipset: P35/G33/G31 - Southbridge: 82801GB (ICH7/R)

Memória: 4GB DDR2 - 400MHz

Placa de Vídeo: NVIDIA Geforce GT 520 2GB

HD: IDE 60GB

Atualmente tenho um HD SATA de 500GB aonde tenho instalado o Windows 7 (Não posso formata-lo agora), eu quero instalar o OSX em outro HD, que é um IDE de 60GB, é possível? Como faço Dual Boot neste caso?

Eu baixei o iATKOS_L2 - MD5 = c1f92e1e19bffa947871f082e1f231fd

Se alguém puder ajudar ae, agradeço muito.

Abraço

artur_pt · July 25, 2012

olá

bios

ahci

e tenta fazer boot do dvd

-v

bom hack

Ricardo Guimarães · July 26, 2012

Olá, Artur

Muito obrigado por responder. Vou tentar fazer o boot do dvd, e seguir a instalação.

Valeu!

Ricardo Guimarães · July 27, 2012

Voltando aqui.

Bom eu gravei o disco iATKOS_L2 usando o PowerISO no windows pois ele se encontra no formato .dmg. Após isso fui tentar realizar o boot, mas não aconteceu ele fica dando um Erro "SAM Multimedia Read or Write Failed

Sense_key Sense_key = 0x06, ASC = 0x29, ASCQ = 0x00"

Resetei o meu pc e tentei realizar o boot usando iAtkos S3 Snow Leopard 10.6.3, como ele consegui o boot, instalou, mas depois que terminou a instalação o pc reniciou e quando escolho o hd aonde foi instalado o Leopard dou o comnado "-v GraphicsEnabler=Yes cpus=1 busratio=20" e vai começar a bootar mas dá um kernel panic e trava.

O que posso fazer?

Será que consigo instalar usando uma versão do Mountain Lion Retail ou Lion ou Snow Leopard + um bootloader?

artur_pt · July 27, 2012

olá

quanto ao l2, está mal gravado...

a respeitp do snow n sei onde foste buscar os comandos para o cpu, mas se esse for teu busratio ?

agora de certeza k terás de subir com GraphicsEnabler=No, e snow pouco ou nenhum suporte terá essa nvidia, ainda + em 10.6.3

posta foto do panic

bom hack

iFIRE · July 27, 2012

hola Artur, estou tendo problemas com este Notebook Toshiba Satelite com um i5 2410M Sandy Bridge, chipset HM65, estou em duvida si e um bug o realmente so me funciona um nucleo do processador, nao consigo sulucionar isto, vc poderia me dar dar alguma sugestao de como sulucionar isto, o isto esta correto, ya me passou com un desktop tambem com o mesmo chipset HM65. Tamben apliquei os Patch para i5 Sandy Bridge mais nao resolveu.

Chameleon 2030 , Lion 10.73

t kernel[0]: PMAP: PCID enabled

Jul 26 17:31:33 localhost kernel[0]: Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64

Jul 26 17:31:33 localhost kernel[0]: vm_page_bootstrap: 1003600 free pages and 36784 wired pages

Jul 26 17:31:33 localhost kernel[0]: kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]

Jul 26 17:31:33 localhost kernel[0]: zone leak detection enabled

Jul 26 17:31:33 localhost kernel[0]: standard timeslicing quantum is 10000 us

Jul 26 17:31:33 localhost kernel[0]: mig_table_max_displ = 73

Jul 26 17:31:33 localhost kernel[0]: TSC Deadline Timer supported and enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=2 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: calling mpo_policy_init for Sandbox

Jul 26 17:31:33 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)

Jul 26 17:31:33 localhost kernel[0]: calling mpo_policy_init for Quarantine

Jul 26 17:31:33 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)

Jul 26 17:31:33 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet

Jul 26 17:31:33 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)

Jul 26 17:31:33 localhost kernel[0]: MAC Framework successfully initialized

Jul 26 17:31:33 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers

Jul 26 17:31:33 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87

Jul 26 17:31:33 localhost kernel[0]: ACPI: System State [s0 S3 S4 S5] (S3)

Jul 26 17:31:33 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000

Jul 26 17:31:33 localhost kernel[0]: [ PCI configuration begin ]

Jul 26 17:31:33 localhost kernel[0]: PCI configuration changed (bridge=2 device=0 cardbus=0)

Jul 26 17:31:33 localhost kernel[0]: [ PCI configuration end, bridges 6 devices 12 ]

Jul 26 17:31:33 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046

Jul 26 17:31:33 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete

Jul 26 17:31:33 localhost kernel[0]: RTC: Only single RAM bank (128 bytes)

Jul 26 17:31:33 localhost kernel[0]: FakeSMCDevice: 19 preconfigured key(s) added

Jul 26 17:31:33 localhost kernel[0]: SMC: successfully initialized

Jul 26 17:31:33 localhost kernel[0]: IntelThermal: CPU family 0x6, model 0x2a, stepping 0x7, cores 2, threads 4, TJmax 100

Jul 26 17:31:33 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]

Jul 26 17:31:33 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused

Jul 26 17:31:33 localhost kernel[0]: PXSX cannot assert wake from D3cold

Jul 26 17:31:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start

Jul 26 17:31:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start

Jul 26 17:31:33 localhost kernel[0]: GeForceX: VBIOS successfully read from PRAMIN

Jul 26 17:31:33 localhost kernel[0]: GeForceX: BIT VBIOS found

Jul 26 17:31:33 localhost kernel[0]: GeForceX: detected an NV50 generation card (0x0a8d00b1) with 512Mib of DDR3 memory (6)

Jul 26 17:31:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded

Jul 26 17:31:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded

Jul 26 17:31:33 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready

Jul 26 17:31:33 localhost kernel[0]: USBF: 2.237 EHCI controller unable to take control from BIOS

Jul 26 17:31:33 localhost kernel[0]: USBF: 2.237 AppleUSBEHCI[0xffffff800bbe8000]: unable to obtain ownership: 0xe00002be

Jul 26 17:31:33 localhost kernel[0]: USBF: 2.237 AppleUSBEHCI[0xffffff800bbe8000]::UIMInitialize - Error occurred (0xe00002be)

Jul 26 17:31:33 localhost kernel[0]: USBMSC Identifier (non-unique): 0x5e3 0x702 0x14

Jul 26 17:31:33 localhost kernel[0]: rooting via boot-uuid from /chosen: 9B63B658-4B21-3561-BBB4-1DBEC8561732

Jul 26 17:31:33 localhost kernel[0]: From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

Jul 26 17:31:33 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@1A/AppleUSBEHCI/USB Storage@1a110000/IOUSBInterface@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/TOSHIBA MK8025GAS Media/IOFDiskPartitionScheme/Untitled 1@1

Jul 26 17:31:33 localhost kernel[0]: BSD root: disk1s1, major 14, minor 5

Jul 26 17:31:33 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 3475968 to: 6112768 (joffset 0x257000)

Jul 26 17:31:33 localhost kernel[0]: jnl: unknown-dev: journal replay done.

Jul 26 17:31:33 localhost kernel[0]: Kernel is LP64

Jul 26 17:31:33 localhost kernel[0]: hfs: Removed 0 orphaned / unlinked files and 11 directories

Jul 26 17:31:44 localhost kernel[0]: macx_swapon SUCCESS

Jul 26 17:31:45 localhost kernel[0]: Waiting for DSMOS...

Jul 26 17:31:55 MacBook-Pro-de-Cristian kernel[0]: Controller: Intel Cougar Point (vendor ID: 8086, device ID: 1c20)

Jul 26 17:31:55 MacBook-Pro-de-Cristian kernel[0]: Controller: NVidia (Unknown) (vendor ID: 10de, device ID: 0be3)

Jul 26 17:32:00 MacBook-Pro-de-Cristian kernel[0]: Atheros: mac 192.2 phy 14.0 radio 12.0

Jul 26 17:32:00 MacBook-Pro-de-Cristian kernel[0]: Previous Shutdown Cause: 3

Jul 26 17:32:01 MacBook-Pro-de-Cristian kernel[0]: NVDANV50HAL loaded and registered.

Jul 26 17:32:01 MacBook-Pro-de-Cristian kernel[0]: VoodooPS2SynapticsTouchPad loaded

Jul 26 17:32:01 MacBook-Pro-de-Cristian kernel[0]: No interval found for . Using 8000000

Jul 26 17:32:01 MacBook-Pro-de-Cristian kernel[0]: VoodooPS2Trackpad: Synaptics TouchPad v7.2

Jul 26 17:32:03 MacBook-Pro-de-Cristian kernel[0]: DSMOS has arrived

Jul 26 17:32:05 MacBook-Pro-de-Cristian kernel[0]: NTFS driver 3.10 [Flags: R/W].

Jul 26 17:32:06 MacBook-Pro-de-Cristian kernel[0]: NTFS volume name WINDOWS, version 3.1.

Jul 26 17:32:06 MacBook-Pro-de-Cristian kernel[0]: NTFS volume name Data, version 3.1.

Jul 26 17:32:13 MacBook-Pro-de-Cristian kernel[0]: AirPort_AthrFusion21: Ethernet address d0:df:9a:87:71:5d

Jul 26 17:32:13 MacBook-Pro-de-Cristian kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification

Jul 26 17:32:13 MacBook-Pro-de-Cristian kernel[0]: IO80211Interface::efiNVRAMPublished():

Jul 26 17:32:13 MacBook-Pro-de-Cristian kernel[0]: AirPort: Link Down on en0. Reason 1 (Unspecified).

Jul 26 17:32:14 MacBook-Pro-de-Cristian kernel[0]: setWOW_PARAMETERS:wowevents = 2(1)

Jul 26 17:36:51 MacBook-Pro-de-Cristian kernel[0]: Resetting IOCatalogue.

artur_pt · July 27, 2012

olá

os problemas com sandy powermanagent so começaram em 10.7.4, por isso deve ter a ver com dsdt / ssdt.

k smbios estás a usar ?

tenta usar macmini5,1

bom hack

iFIRE · July 27, 2012

Usei a SMBIOS MacBook Pro 8,1 8,2 8,3 tomando en conta a sugestao da app Chameleon Wizard que serian para Sandy Bridge, tambem provei a 6,1 i a 6,2 MacBook Pro, mais nao muda nada, continua o mesmo erro, agora estou usando a 8,3 i depois de alguns KP , usei o patch para AICPM e resolveu os KP i agora tenho 6 P_S , vou provar a Mac Mini5,1 para ver si soluciona, mais ainda fico na duvida si esta funcionando somente un nucleo do processador, o que te parece????