Jump to content
Ricardo Guimarães

Meu hardware roda o Lion?

10 posts in this topic

Recommended Posts

Olá a Todos amigos do Forum, este é o meu primeiro post aqui. Estou ansioso e muito intenciosado a fazer o meu primeiro hackintosh. Estou realmente cansado do Windows por diversos fatores. Bom mas vamos ao que importa, abaixo segue minha configuração e gostaria de saber o que devo fazer pra instalar o Os X.

 

Procesador: Intel Core 2 Quad Q8400 @ 2.66GHz - MMX, SSE (1, 2, 3, 3S, 4.1), EM64T, VT-x

Placa Mãe: Gigabyte G31M-S2C - Chipset: P35/G33/G31 - Southbridge: 82801GB (ICH7/R)

Memória: 4GB DDR2 - 400MHz

Placa de Vídeo: NVIDIA Geforce GT 520 2GB

HD: IDE 60GB

 

Atualmente tenho um HD SATA de 500GB aonde tenho instalado o Windows 7 (Não posso formata-lo agora), eu quero instalar o OSX em outro HD, que é um IDE de 60GB, é possível? Como faço Dual Boot neste caso?

 

Eu baixei o iATKOS_L2 - MD5 = c1f92e1e19bffa947871f082e1f231fd

 

Se alguém puder ajudar ae, agradeço muito.

 

Abraço

Share this post


Link to post
Share on other sites
Advertisement

Voltando aqui.

Bom eu gravei o disco iATKOS_L2 usando o PowerISO no windows pois ele se encontra no formato .dmg. Após isso fui tentar realizar o boot, mas não aconteceu ele fica dando um Erro "SAM Multimedia Read or Write Failed

Sense_key Sense_key = 0x06, ASC = 0x29, ASCQ = 0x00"

Resetei o meu pc e tentei realizar o boot usando iAtkos S3 Snow Leopard 10.6.3, como ele consegui o boot, instalou, mas depois que terminou a instalação o pc reniciou e quando escolho o hd aonde foi instalado o Leopard dou o comnado "-v GraphicsEnabler=Yes cpus=1 busratio=20" e vai começar a bootar mas dá um kernel panic e trava.

 

O que posso fazer?

Será que consigo instalar usando uma versão do Mountain Lion Retail ou Lion ou Snow Leopard + um bootloader?

Share this post


Link to post
Share on other sites

olá

 

quanto ao l2, está mal gravado...

 

a respeitp do snow n sei onde foste buscar os comandos para o cpu, mas se esse for teu busratio ?

 

agora de certeza k terás de subir com GraphicsEnabler=No, e snow pouco ou nenhum suporte terá essa nvidia, ainda + em 10.6.3

 

posta foto do panic

 

bom hack

Share this post


Link to post
Share on other sites

hola Artur, estou tendo problemas com este Notebook Toshiba Satelite com um i5 2410M Sandy Bridge, chipset HM65, estou em duvida si e um bug o realmente so me funciona um nucleo do processador, nao consigo sulucionar isto, vc poderia me dar dar alguma sugestao de como sulucionar isto, o isto esta correto, ya me passou com un desktop tambem com o mesmo chipset HM65. Tamben apliquei os Patch para i5 Sandy Bridge mais nao resolveu.

 

Chameleon 2030 , Lion 10.73

 

 

 

t kernel[0]: PMAP: PCID enabled

Jul 26 17:31:33 localhost kernel[0]: Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64

Jul 26 17:31:33 localhost kernel[0]: vm_page_bootstrap: 1003600 free pages and 36784 wired pages

Jul 26 17:31:33 localhost kernel[0]: kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]

Jul 26 17:31:33 localhost kernel[0]: zone leak detection enabled

Jul 26 17:31:33 localhost kernel[0]: standard timeslicing quantum is 10000 us

Jul 26 17:31:33 localhost kernel[0]: mig_table_max_displ = 73

Jul 26 17:31:33 localhost kernel[0]: TSC Deadline Timer supported and enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=2 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: calling mpo_policy_init for Sandbox

Jul 26 17:31:33 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)

Jul 26 17:31:33 localhost kernel[0]: calling mpo_policy_init for Quarantine

Jul 26 17:31:33 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)

Jul 26 17:31:33 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet

Jul 26 17:31:33 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)

Jul 26 17:31:33 localhost kernel[0]: Copyright © 1982, 1986, 1989, 1991, 1993

Jul 26 17:31:33 localhost kernel[0]: The Regents of the University of California. All rights reserved.

Jul 26 17:31:33 localhost kernel[0]: MAC Framework successfully initialized

Jul 26 17:31:33 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers

Jul 26 17:31:33 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87

Jul 26 17:31:33 localhost kernel[0]: ACPI: System State [s0 S3 S4 S5] (S3)

Jul 26 17:31:33 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000

Jul 26 17:31:33 localhost kernel[0]: [ PCI configuration begin ]

Jul 26 17:31:33 localhost kernel[0]: PCI configuration changed (bridge=2 device=0 cardbus=0)

Jul 26 17:31:33 localhost kernel[0]: [ PCI configuration end, bridges 6 devices 12 ]

Jul 26 17:31:33 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046

Jul 26 17:31:33 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete

Jul 26 17:31:33 localhost kernel[0]: RTC: Only single RAM bank (128 bytes)

Jul 26 17:31:33 localhost kernel[0]: FakeSMC: Opensource SMC device emulator. Copyright 2009 netkas. All rights reserved.

Jul 26 17:31:33 localhost kernel[0]: FakeSMC: Hardware monitoring plugins. Copyright 2012 kozlek, usr-sse2, slice, navi. All rights reserved.

Jul 26 17:31:33 localhost kernel[0]: FakeSMCDevice: 19 preconfigured key(s) added

Jul 26 17:31:33 localhost kernel[0]: SMC: successfully initialized

Jul 26 17:31:33 localhost kernel[0]: IntelThermal: CPU family 0x6, model 0x2a, stepping 0x7, cores 2, threads 4, TJmax 100

Jul 26 17:31:33 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]

Jul 26 17:31:33 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused

Jul 26 17:31:33 localhost kernel[0]: PXSX cannot assert wake from D3cold

Jul 26 17:31:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start

Jul 26 17:31:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start

Jul 26 17:31:33 localhost kernel[0]: GeForceX: VBIOS successfully read from PRAMIN

Jul 26 17:31:33 localhost kernel[0]: GeForceX: BIT VBIOS found

Jul 26 17:31:33 localhost kernel[0]: GeForceX: detected an NV50 generation card (0x0a8d00b1) with 512Mib of DDR3 memory (6)

Jul 26 17:31:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded

Jul 26 17:31:33 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded

Jul 26 17:31:33 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready

Jul 26 17:31:33 localhost kernel[0]: USBF: 2.237 EHCI controller unable to take control from BIOS

Jul 26 17:31:33 localhost kernel[0]: USBF: 2.237 AppleUSBEHCI[0xffffff800bbe8000]: unable to obtain ownership: 0xe00002be

Jul 26 17:31:33 localhost kernel[0]: USBF: 2.237 AppleUSBEHCI[0xffffff800bbe8000]::UIMInitialize - Error occurred (0xe00002be)

Jul 26 17:31:33 localhost kernel[0]: USBMSC Identifier (non-unique): 0x5e3 0x702 0x14

Jul 26 17:31:33 localhost kernel[0]: rooting via boot-uuid from /chosen: 9B63B658-4B21-3561-BBB4-1DBEC8561732

Jul 26 17:31:33 localhost kernel[0]: From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

Jul 26 17:31:33 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@1A/AppleUSBEHCI/USB Storage@1a110000/IOUSBInterface@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/TOSHIBA MK8025GAS Media/IOFDiskPartitionScheme/Untitled 1@1

Jul 26 17:31:33 localhost kernel[0]: BSD root: disk1s1, major 14, minor 5

Jul 26 17:31:33 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 3475968 to: 6112768 (joffset 0x257000)

Jul 26 17:31:33 localhost kernel[0]: jnl: unknown-dev: journal replay done.

Jul 26 17:31:33 localhost kernel[0]: Kernel is LP64

Jul 26 17:31:33 localhost kernel[0]: hfs: Removed 0 orphaned / unlinked files and 11 directories

Jul 26 17:31:44 localhost kernel[0]: macx_swapon SUCCESS

Jul 26 17:31:45 localhost kernel[0]: Waiting for DSMOS...

Jul 26 17:31:55 MacBook-Pro-de-Cristian kernel[0]: Controller: Intel Cougar Point (vendor ID: 8086, device ID: 1c20)

Jul 26 17:31:55 MacBook-Pro-de-Cristian kernel[0]: Controller: NVidia (Unknown) (vendor ID: 10de, device ID: 0be3)

Jul 26 17:32:00 MacBook-Pro-de-Cristian kernel[0]: Atheros: mac 192.2 phy 14.0 radio 12.0

Jul 26 17:32:00 MacBook-Pro-de-Cristian kernel[0]: Previous Shutdown Cause: 3

Jul 26 17:32:01 MacBook-Pro-de-Cristian kernel[0]: NVDANV50HAL loaded and registered.

Jul 26 17:32:01 MacBook-Pro-de-Cristian kernel[0]: VoodooPS2SynapticsTouchPad loaded

Jul 26 17:32:01 MacBook-Pro-de-Cristian kernel[0]: No interval found for . Using 8000000

Jul 26 17:32:01 MacBook-Pro-de-Cristian kernel[0]: VoodooPS2Trackpad: Synaptics TouchPad v7.2

Jul 26 17:32:03 MacBook-Pro-de-Cristian kernel[0]: DSMOS has arrived

Jul 26 17:32:03 MacBook-Pro-de-Cristian kernel[0]: VoodooBattery 1.3 © 2008-10 Superhai, All Rights Reserved. May 5 2010 09:52:50 64 bit

Jul 26 17:32:05 MacBook-Pro-de-Cristian kernel[0]: NTFS driver 3.10 [Flags: R/W].

Jul 26 17:32:06 MacBook-Pro-de-Cristian kernel[0]: NTFS volume name WINDOWS, version 3.1.

Jul 26 17:32:06 MacBook-Pro-de-Cristian kernel[0]: NTFS volume name Data, version 3.1.

Jul 26 17:32:13 MacBook-Pro-de-Cristian kernel[0]: AirPort_AthrFusion21: Ethernet address d0:df:9a:87:71:5d

Jul 26 17:32:13 MacBook-Pro-de-Cristian kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification

Jul 26 17:32:13 MacBook-Pro-de-Cristian kernel[0]: IO80211Interface::efiNVRAMPublished():

Jul 26 17:32:13 MacBook-Pro-de-Cristian kernel[0]: AirPort: Link Down on en0. Reason 1 (Unspecified).

Jul 26 17:32:14 MacBook-Pro-de-Cristian kernel[0]: setWOW_PARAMETERS:wowevents = 2(1)

Jul 26 17:36:51 MacBook-Pro-de-Cristian kernel[0]: Resetting IOCatalogue.

Share this post


Link to post
Share on other sites

olá

 

os problemas com sandy powermanagent so começaram em 10.7.4, por isso deve ter a ver com dsdt / ssdt.

 

k smbios estás a usar ?

 

tenta usar macmini5,1

 

Captura de ecrã 2012-07-27, às 13.17.47.png

 

bom hack

Share this post


Link to post
Share on other sites

Usei a SMBIOS MacBook Pro 8,1 8,2 8,3 tomando en conta a sugestao da app Chameleon Wizard que serian para Sandy Bridge, tambem provei a 6,1 i a 6,2 MacBook Pro, mais nao muda nada, continua o mesmo erro, agora estou usando a 8,3 i depois de alguns KP , usei o patch para AICPM e resolveu os KP i agora tenho 6 P_S , vou provar a Mac Mini5,1 para ver si soluciona, mais ainda fico na duvida si esta funcionando somente un nucleo do processador, o que te parece????

 

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=2 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled

Jul 26 17:31:33 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By GamingEnding
      Greetings,
       
      I've bought an old Mac from a friend. I got it cheap and it had the Problens before.
       
      now the Mac only booted into Single User / Safe mode until i removed the ATI kext 
      on top it has those weird lines (as seen in Picture) they are very thin on a white background 
      so can annybody tell me what is wrong with my mac and what i have to replace (my Mac is an IMac 8,1 early 2008 F226BEC8)
       
      thanks in advance and kind regards
      GamingEnding

    • By vector sigma
      HWSensor Features
      Control temperature of Intel and AMD CPU Control temperature of AMD, Intel and NVidia cards Control temperature of motherboard Control FANS Control Voltages Control HDD/SSD state (SATA & NVMe) with S.M.A.R.T. monitoring  Control frequencies Laptop Battery Monitoring Different applications support High Sierra compatible Installation to /S/L/E or in the ESP (Clover only)  
      Supported languages:
      English (base), Russian, Italian, Korean and semplified Chinese
       
      Source code: at https://sourceforge.net/p/hwsensors/hwsensors3/code3/HEAD/tree/
      Bugs report at https://sourceforge.net/p/hwsensors/hwsensors3/tickets/
      Topic for discussion at: https://www.insanelymac.com/forum/topic/299861-hwsensors3/
       
      Chief Developer @Slice, new HWMonitorSMC2.app and package by @vector sigma
    • By astroguy
      Sorry for the vague subject line, but I think I have a hardware issue and I'm having trouble diagnosing it.  This is a LONG post because I'm trying to explain what I tried and to give you all the info that I do have.
       
      History: This has been a successful Hackintosh for 2 years 2 months.  I have not changed the OS (still running 10.11.4) just to avoid any problems.  I have not changed the hardware other than GPU about a year ago, hard drives over time, and RAM about two weeks ago.  (Keep that RAM in mind.)
       
      Hardware:
      Motherboard: ASRock Z170 OC Formula CPU: Intel i7-6700K RAM: G.SKILL Ripjaws V Series 32GB DDR4 @2400, replaced with Corsair 64GB DDR4 @2133 (but lower CAS latency) GPU: MSI GeForce GTX 970 PSU: CORSAIR AX760 760W 80+ Platinum CPU Heatsink:  CORSAIR Hydro Series H105  
      Problem, Tuesday Night:  Catastrophic death.  Just shut down, couldn't get it up.  I spent over two hours midnight–2am, then another hour after I got up in the AM, determining that the heatsink pump had died.  To make a three hour story short, the errors on the motherboard were all related to RAM, but it had been running fine with the new RAM for 10 days.  I put in the old RAM and got the computer to boot, and then I heard that the fans were going full-tilt and saw the CPU temperature at just under boiling.  And it shut down.  I determined it was the pump and not motherboard because the pump did not turn on when I moved it to a header on the motherboard that had just been powering a fan that was fine.  So I ordered a new CPU cooler and installed it yesterday.
       
      Problem, Sunday Night: It was running fine for a day, after installing the new CPU heat sink.  We had a brown-out in the morning which apparently did NOT trip any UPS in the house, and the computer restarted.  Seemed fine, then tonight (11 hrs after the brownout), I went to make dinner, came back and all the fans were going and the computer wasn't on.  The light on the Corsair pump was flickering.
       
      Trying to Diagnose:  So, with the light flickering, I thought maybe it was the motherboard after all, and the CPU fan 1 was just dead (or dying).  No problem, moved it to CPU fan 2 and moved the fans for the heatsink to chassis 2 and tweaked the fan speeds in the BIOS (I was able to boot to it) and ... couldn't boot.  I can get to the BIOS.  I can start getting to the Mac OS, but I can't actually boot fully.  The motherboard is cycling between error codes 00 and 19, which from what I can find means CPU (00) or RAM (19).  I have tried powering the whole system down (on the PSU) for awhile, going back to the old RAM (works but then same error code on reboot), and even going to a passive heatsink I had in storage.
       
      Why this May Be a Hackintosh Question:  I have a pattern now to diagnose.  After hitting the restart a few times, I can get into the BIOS, no longer getting the 00/19 error on the motherboard.  I can get to the Clover boot menu, at which point the diagnostic LED on the motherboard turns off.  I can start the Mac OS, it spits out a bunch of diagnostic stuff, and then freezes, and the lights on the motherboard turn back on and flash between the 00 and 19 errors and the display shuts off.  I get to the same spot in the Mac OS startup, and that's when it shuts down.  To me, from the zero that I know about this, it looks like it's saying there's a CPU error.  Meaning I may have fried the CPU (or motherboard? or both?) during that initial CPU cooler failure five days ago.  I have attached a screenshot from the video I took of the screen while starting up the last time.
       
      CMOS Reset:  I tried doing this as an addendum, after taking pictures of every screen in the BIOS so I could restore.  The reset definitely reset the BIOS, I got it to boot to the BIOS again, but I'm stuck at the same death point as in the screenshot.  The ONLY difference is that now instead of just stopping there, it goes black for a few seconds and returns to the BIOS option screen (F2 for BIOS, F11 for Boot, etc.), and then tries to boot the Mac OS again.  Fails at the same point again, the only difference each time is that in that "Backtrace (CPU #) ..." line, the # changes, and the com.apple.lokit.IOBluetoothHostController... hex stuff is different.
       
      Help!?  Do I need a new motherboard and CPU?  Fortunately, everything is backed up hourly, and on my laptop, and the HDDs should still be fine.

    • By WarDoc
      So is anyone planning on getting this to Hack it as its the perfect mix of intel and amd in the perfect size 
       
       
      https://www.pcworld.com/article/3267074/computers/intel-hades-canyon-nuc-nuc8i7hvk-review.html 
       
    • By Zyr0
      Hello everyone, I'm new to the forum and I'm a little lost ...
      I am looking for a shopping guide (a bit like tonymac which is very good, I come here because of an ethical problem of tonymacs http://goo.gl/WdPxAy).
       
      I currently have a machine with the following config:
      CPU  i5-4570
      Mb   Asus H87M-PLUS
      RAM  16GB Kingstone HyperX Blue
      SSD  Intel 128GB
      GPU  Gainware Nvidia GTX 650 Ti
       
      It works pretty well apart few random crashes ...
      It was installed with *beast tools...
       
       
      I manually installed and configured clover and I want to make a new machine with a clean and much more advanced installation.
      I wanted a multibooting to Win10 Pro and Mac OS High Sierra 10.13.3 (in preference but it can be Sierra 10.12 for stability)
       
      I started looking at material:
      CPU i7-7700K
      Mb  Gigabyte Aorus GA-Z270X-GAMING K5 / Gigabyte GA-Z270N-WIFI / Gigabyte GA-B250M-D3H / Gigabyte GA-H270M-DS3H
      RAM HyperX Fury Noir 16 Go (2x 8Go) DDR4 2133 MHz CL14
      SSD Samsung 840 EVO 256GB Sata III
      GPU Gigabyte GeForce GTX 1050 OC Low Profile 2G
       
       
      What do you think about this ?
×