Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Sign in to follow this  

DSDT MSI X58 pro-e [no ALC889 working with AppleHDA]

1 post in this topic

Recommended Posts



I tried my best with DSDT and followed all tutorials for this MoBo i could find, but they allways point to the Voodoo kext. Unfortunately this sollution is simply not good enough for me. I have very strong noise in my spekers with all the voodoo kexts and it is vital to me that the sound is clean.


Soo if You have a sollution better then I then I would be glad to hear it [sic!]


So far i installed retail 10.7 with the live DVD (regae) then did the combo 10.7.2. With my DSDT.aml copied to the desktop I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 4.2.1 and checked:


+ user DSDT Install
+ System Utilities
- Drivers
 - Kexts
   - Audio
     - Realtek ALC8xx
       + ALC8xxHDA
       + AppleHDARollback
   - Disk
     + 3rdPartySATA
     + Jmicron36x ATA
   - Network
     + Realtek Gigabit...


I see in SystemUtil that the HDA kext is working (I see input and output choices) but i can't hear a thing.


The system is stable so far (no booting in verbose mode to avoid kernel panic as before) but still no clean sound, well no sound at all...


Any help will be nice!!!


There is a DSDT for MSI X58 pro-e in attachment (extracted in linux and patched with DSDTeditor and debugged in DSDT SE

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Pink Waters
      Hi guys, I have my dsdt.aml extracted from windows.
      I compiled just fine no errors, but when I try to add audio in it following this guide I get a lot of errors

      I am running High Sierra
      my audio is ALC889

      The errors are attached

    • By uzmi
      Para los usb 3 de mi placa uso un inyector USB_Series8_Injector.kext modificado para mis puertos.
      Deseo eliminar dicho inyector poniendo los datos de los puertos en el DSDT directamente pero no se si es posible ni como hacerlo.
      Tengo dos instalaciones en dos discos con 10.13.3 
      Uno con un DSDT basado en el que crea Clover y luego modificado para mi equipo.
      Otro con un DSDT basado en el de Pikeralpha y luego modificado para mi equipo
      ¿Podrían echarme una mano?
      Dejo el inyector o un SSDT-UIAC con los datos de los puertos.
      Muchas gracias.
    • By sect0r5
      Hello guys I need help for tuning my system for better working possibilities.
      What works:
      Sleep/Wake Audio Ethernet App Store  
      CS:GO not working (other Steam games are OK) Bad GPU performance 40 fps on OSX Cinebench vs 85 fps on Windows Cinebench Big audio latency when using line input      //edit : problem is gone  Slow start of Viber Desktop, OBS and some web pages  //edit : OBS is slow on native MacBook too Sometime random mouse freezings            Huge lags on latest NVidiaWeb drivers(158, 159) Sometimes can't awake and stuck on black screen after restart   //edit : now is alright. magic! Sometimes sound start crackling when watching online video     //edit  : magically gone edit : she come again  
      It's happens on a both Kernel's :
      Shanee 13.3.3
      Clover 4392
      What info i can provide for better results?
      With best regards, Stan.
      Send me stanMacs-Pro.zip
    • By Antonio95
      Buonasera a tutti, ho installato con successo macOS High Sierra 10.13 su un notebook Toshiba C660 con le seguenti caratteristiche:
      Intel Core i5 2410M Ram 4 GB Chipset Intel HM65 Wi-Fi + BT Atheros AR5B195 (AR9285+ AR3011 Combo) Geforce NVIDIA 315M 1024MB Audio Realtek ALC269 Funziona più o meno tutto, o meglio funzionava poiché ho effettuato l'aggiornamento da macOS 10.3 a macOS 10.3.3 e non ha più funzionato l'audio. Fino alla versione 10.3 ero riuscito a farlo funzionare grazie ad AppleALC.kext cui dipende da Lilu.kext. Ovviamente entrambi i Kext sono aggiornati alle ultime versioni disponibili, ed inutile dire che ho provato più volte a reinstallarli. Si trovano sia in S/L/E che nella partizione EFI dedicata di Clover. Prima durante il boot in verbose vedevo qualcosa come "Sound assertion in AppleHDAController at line 451", cosa che non vedo più dopo l'aggiornamento. Una volta avviato, l'icona dell'audio è praticamente grigia, mentre dalle impostazioni dice "Non è stato trovato nessun dispositivo di uscita".
      Ringrazio chiunque voglia aiutarmi.
    • By quattrofx
      Hi to all,
      I just wont to give inough informations on one place for all the people with same Hardware with
      costimization steps witch i have done. I have fast perfect working High Sierra 10.13.3 on my PC but
      still needs to be actualized thru the DSDT, because it ist the only way to get all the hardware 
      properly working.
      Gigabyte Z370 Aorus Ultra Gaming - BIOS F7h
      Intel i7-8700K (4.8GHz)
      Gigabyte GTX 1080 G1 Gaming  8G
      DDR4 64GB PC 3000 CL15 G.Skill KIT (4x16GB) 64GVR Ripjaws V
      Dual-Band PCI-e Adapter TP-Link TL-WDN4800
      Firewire PCI-e Digitus (Texas Instruments Chipset)
      Bluetooth 4.0 USB Dongle ASUS BT400 (Broadcom)
      PSU: LC-Power Metatron Prophecy 2 LC8750II V2.2, 750 Watt
      2 x NVMe SSD 960 Evo 500GB (Win10Pro & High Sierra 10.13.3)
      1 x SSD Crucial 500GB (Sierra 10.12.6)
      1 x 4TB Segate Barracuda SATA 3 (Multimedia)
      Tripple-boot Win10Pro, Sierra 10.12.6 & High Sierra 10.13.3
      Bios Settings:
      1.       M.I.T. → Advanced Memory Settings  Extreme Memory Profile(X.M.P.) : Profile1
      2.       BIOS → Fast Boot : Disabled
      3.       BIOS → LAN PXE Boot Option ROM : Disabled
      4.       BIOS → Storage Boot Option Control : UEFI
      5.       Peripherals → Trusted Computing → Security Device Support : Disable
      6.       Peripherals → Network Stack Configuration → Network Stack : Disabled
      7.       Peripherals → USB Configuration → Legacy USB Support : Auto
      8.       Peripherals → USB Configuration → XHCI Hand-off : Enabled
      9.       Chipset → Vt-d : Enabled
      10.   Chipset → Wake on LAN Enable : Disabled
      11.   Chipset → IOAPIC 24-119 Entries : Enabled
      Dedicated graphics card:
      1.      Peripherals → Initial Display Output : PCIe 1 Slot
      2.      Chipset → Integrated Graphics : Enabled
      Chipset → DVMT Pre-Allocated :128M   
      Wake for Ethernet Network access - Unchecked
      Enable Power Nap - Unchecked
      First step:
      I have a perfect Sierra 10.12.6 working on my HP Z800 witch i use to clone to one SSD
      Second step:
      Delete old EFI on cloned SSD and put the new one from here:
      Adjusted Kexts and Config.plist for my Rig:
      Kext Folder:
      FakeSMC.kext + Sensors Kexts
      Thread step:
      connected new cloned SSD on the SATA port and Sierra started up and working.
      Fourth step:
      regulary updated to HighSierra 10.13.3 running installer from App folder.
      Fifth step:
      Cloned Sierra SSD to NVMe SSD 960 Evo 500GB
      Made changes to BIOS & Config.plist to become hardware encoding acceleration  in FCPX and HEVC support:
      BIOS Gigabyte:
      §  Chipset → Integrated Graphics : Enabled
      §  Chipset → DVMT Pre-Allocated :128
      §  Peripherals → Initial Display Output : PCIe 1 Slot
      1.       Inject Kexts is set to Yes
      2.       In Boot Under Custom flags added:
      Nvidia users: shikigva=60
      3.       Kaby Lake & Coffee Lake Users:
      In Devices Using Nvidia 
      - Set ig-platform-id to: 0x59120003
      DSDT Patching:
      1.       HECI -> IMEI Patch
      1.       Comment: change HECI to IMEI
      2.       Find* [Hex]: 48454349
      3.       Replace [Hex]: 494d4549
      2.       GFX0 -> IGPU Patch
      1.       Comment: change GFX0 to IGPU
      2.       Find* [Hex]: 47465830
      3.       Replace* [Hex] : 49475055
      3.        PEGP -> GFX0 Patch
      1.       Comment: change PEGP to GFX0
      2.       Find* [Hex]: 50454750
      3.       Replace [Hex]: 47465830
      I think that in my Config.plist (used EFI from here https://hackintosher.com/guides/high-sierra-install-full-guide/  and edited by me)
      are the double entries, but i am not shure and i dont wont to make a mess myself.
      It is beter to leave it to the profis like Maldon!
      Maldon, i have attached my Send me iMac_4FX.zip file generated with RunMe.app
      Can you post the list of maded Patches for this RIG please.
      THX in advance
      Send me iMac_4FX.zip