littlepapapump Posted May 2, 2011 Share Posted May 2, 2011 Step 1 Download [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacyand burn to cd Step 2 Get mac osx 10.6.3 dvd Step 3 Boot [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy and eject cd, replace [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy cd with your retail mac 10.6.3 dvd wait 20-30 seconds and press F5, boot with flags -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 Step 4 Open disk utility and partition one of the drives to GUID with one partition and name drive of your choice and install mac to your freshly partitioned GUID harddrive Step 5 After completed install, plug ethernet cable into laptop, remove mac osx 10.6.3 cd from laptop and put [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy back in and boot from harddrive where you installed mac and boot with the same flags as above -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1, Step 6 after boot setup your first time mac insall and run the software upate, install all updates including 10.6.7 update, while updates are downloading, obtain [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], nvidia update from the downloads section, [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url],and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy again, after updates complete install and allow reboot off harddrive using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy Step 7 Boot off harddrve again using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy with the same flags again -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 and open [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], chimera bootloader and install all osx tools at the bottom especially show all files, then install nvidia update, Step 8 Reboot computer with same flags -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 After boot go into applications and open show hidden files or something like that name, click show. Step 9 Open the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy that you downloaded, and open up the extra folder and copy the Preboot.dmg to your computers extra folder on your harddrive. You will now have a full functioning boot with full graphics, for full audio delete the voodoohda.kext from stsyem/library/extentions and install version from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] x.x.56 under audio, universal. Copy the kext from /system/library/extentions/voodoohda.kext to your desktop. Step 10 download mkext tool from google, and the preboot.dmg you transfered to your extras folder open up and find the .mkext file, open it with mkext tool and remove the voodooha from their and replace with the one you copied to your desktop, repackage, save and replace the .mkext inside of the Preboot.dmg on your harddrive inside your extras folder, you should have a perfect install, for wireless install a atheros 9285 and voodoobattery for battery both which can be found online, google is your friend This is my first tutorial on this forum so please be gentle, give feedback thanks! Link to comment Share on other sites More sharing options...
bigmahlman Posted May 13, 2011 Share Posted May 13, 2011 Any chance this will work with the g53? Link to comment Share on other sites More sharing options...
littlepapapump Posted May 20, 2011 Author Share Posted May 20, 2011 Any chance this will work with the g53? someone with that laptop on tonymacx86 installed successfully using my tutorial. Link to comment Share on other sites More sharing options...
artimess Posted May 21, 2011 Share Posted May 21, 2011 Step 1 Download [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacyand burn to cdStep 2 Get mac osx 10.6.3 dvd Step 3 Boot [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy and eject cd, replace [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy cd with your retail mac 10.6.3 dvd wait 20-30 seconds and press F5, boot with flags -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 Step 4 Open disk utility and partition one of the drives to GUID with one partition and name drive of your choice and install mac to your freshly partitioned GUID harddrive Step 5 After completed install, plug ethernet cable into laptop, remove mac osx 10.6.3 cd from laptop and put [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy back in and boot from harddrive where you installed mac and boot with the same flags as above -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1, Step 6 after boot setup your first time mac insall and run the software upate, install all updates including 10.6.7 update, while updates are downloading, obtain [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], nvidia update from the downloads section, [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url],and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy again, after updates complete install and allow reboot off harddrive using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy Step 7 Boot off harddrve again using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy with the same flags again -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 and open [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], chimera bootloader and install all osx tools at the bottom especially show all files, then install nvidia update, Step 8 Reboot computer with same flags -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 After boot go into applications and open show hidden files or something like that name, click show. Step 9 Open the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy that you downloaded, and open up the extra folder and copy the Preboot.dmg to your computers extra folder on your harddrive. You will now have a full functioning boot with full graphics, for full audio delete the voodoohda.kext from stsyem/library/extentions and install version from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] x.x.56 under audio, universal. Copy the kext from /system/library/extentions/voodoohda.kext to your desktop. Step 10 download mkext tool from google, and the preboot.dmg you transfered to your extras folder open up and find the .mkext file, open it with mkext tool and remove the voodooha from their and replace with the one you copied to your desktop, repackage, save and replace the .mkext inside of the Preboot.dmg on your harddrive inside your extras folder, you should have a perfect install, for wireless install a atheros 9285 and voodoobattery for battery both which can be found online, google is your friend This is my first tutorial on this forum so please be gentle, give feedback thanks! Do you have power mgmt and speed step working? too? Thanks, Artimess Link to comment Share on other sites More sharing options...
sparkythewondersquid Posted June 12, 2011 Share Posted June 12, 2011 What download page do you speak of? Link to comment Share on other sites More sharing options...
vitoxpyesmac Posted July 8, 2011 Share Posted July 8, 2011 any news about lion. or some one manage to get DSDT.??? Link to comment Share on other sites More sharing options...
dipauli Posted July 12, 2011 Share Posted July 12, 2011 Can you describe how I can get to 10.6.8 using the combo update? Running in 10.6.7 gives a KP. And install from an other partition gives an error that the disk does not meet the requirements. Any idea? Link to comment Share on other sites More sharing options...
LxgBakayoko Posted July 15, 2011 Share Posted July 15, 2011 Step 1 Download [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacyand burn to cdStep 2 Get mac osx 10.6.3 dvd Step 3 Boot [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy and eject cd, replace [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy cd with your retail mac 10.6.3 dvd wait 20-30 seconds and press F5, boot with flags -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 Step 4 Open disk utility and partition one of the drives to GUID with one partition and name drive of your choice and install mac to your freshly partitioned GUID harddrive Step 5 After completed install, plug ethernet cable into laptop, remove mac osx 10.6.3 cd from laptop and put [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy back in and boot from harddrive where you installed mac and boot with the same flags as above -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1, Step 6 after boot setup your first time mac insall and run the software upate, install all updates including 10.6.7 update, while updates are downloading, obtain [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], nvidia update from the downloads section, [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url],and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy again, after updates complete install and allow reboot off harddrive using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy Step 7 Boot off harddrve again using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy with the same flags again -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 and open [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], chimera bootloader and install all osx tools at the bottom especially show all files, then install nvidia update, Step 8 Reboot computer with same flags -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1 After boot go into applications and open show hidden files or something like that name, click show. Step 9 Open the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy that you downloaded, and open up the extra folder and copy the Preboot.dmg to your computers extra folder on your harddrive. You will now have a full functioning boot with full graphics, for full audio delete the voodoohda.kext from stsyem/library/extentions and install version from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] x.x.56 under audio, universal. Copy the kext from /system/library/extentions/voodoohda.kext to your desktop. Step 10 download mkext tool from google, and the preboot.dmg you transfered to your extras folder open up and find the .mkext file, open it with mkext tool and remove the voodooha from their and replace with the one you copied to your desktop, repackage, save and replace the .mkext inside of the Preboot.dmg on your harddrive inside your extras folder, you should have a perfect install, for wireless install a atheros 9285 and voodoobattery for battery both which can be found online, google is your friend This is my first tutorial on this forum so please be gentle, give feedback thanks! still need to boot with flags -v arch=i386 busratio=9 maxmem=4096 PCIRootUID=1?? after the step 10? Link to comment Share on other sites More sharing options...
vitoxpyesmac Posted July 15, 2011 Share Posted July 15, 2011 "open it with mkext tool and remove the voodooha from their and replace with the one you copied to your desktop, repackage, save and replace the .mkext inside of the Preboot.dmg on your harddrive inside your extras folder" i'm stuck here can you please explain in details .. always i have kp.. i have GS73SW (TY119V)2630QM CPU,460 1.5 GB video card,8 GB RAM, 2 * 500 GB HDD,17.3 HD LED not full HD. Please help. Link to comment Share on other sites More sharing options...
Recommended Posts