thy1225 Posted March 17, 2011 Share Posted March 17, 2011 here's what I got: GA-P67A-UD3-B3 rev1.1 F2 Intel Sandy Bridge i7 2600 RAM 8G 1333 DDR3 Leadtek GTX460 1G OC WD 1TB Lite-On DVDRW the geekbench photo shows where I am right now (currently no sound) dose the score ok? i really dont know how much is normal...... here's a quick guide: legacy [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 10.6.3 combo upgrade 10.6.6 [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.3 -> UserDSDT Install (using maleorderbride's DSDT file from here , thanks for maleorderbride's guide) (maleorderbride's board is GA-P67A-UD3, although its not exactly the same as mine...i use it's DSDT anyway...., maybe it's not working well ...how to check?) Newcom's legacy kernel package Anval's boot loader 5.1.4 tony nvidia update for GTX460(with GraphicsEnabler=Yes) now I have to boot with "arch=i386 -force64 busratio=29" I can't boot with arch=x86_64, it just keep rebooting with some message like "CPU HALTED:......etc." if you know the reason, please let me know -force64 is for the 8G ram but in the ATM it shows 800 instead of 1333....does it really run at 800? any way to fix it? busratio=29 is for the jitter mouse. is there any way I can get rid of it? it decrease the speed right?? sorry ... I'm no expert...I just keep trying and trying .... if there's any chance I can make it better, please help me..... thanks for everyone making this happen.... and welcome any help and suggestion... Link to comment Share on other sites More sharing options...
keypox Posted March 18, 2011 Share Posted March 18, 2011 I wanna get taht board too, i posted on the thread you linked but taht guy never replied. I bet when 10.6.7 comes out that board will work great. Even thought it shows 800 doesnt meant its running at 800, you can chagne that with a file. But it doesnt matter, what ever the bios has it set at is what it runs at. Edit: smbios.plist is the file, but its only cosmetic. Link to comment Share on other sites More sharing options...
thy1225 Posted March 18, 2011 Author Share Posted March 18, 2011 I wanna get taht board too, i posted on the thread you linked but taht guy never replied. I bet when 10.6.7 comes out that board will work great. Even thought it shows 800 doesnt meant its running at 800, you can chagne that with a file. But it doesnt matter, what ever the bios has it set at is what it runs at. thanks for explaining. wish 10.6.7 comes out earlier .... Link to comment Share on other sites More sharing options...
r0nnie Posted March 21, 2011 Share Posted March 21, 2011 I have the same board. I works great, only the sound don´t work. How has you get it working? With the AnVal bootloader you can boot in the 64bit modus. 1. You must load the newst packet from this site AnVal 2. You must make all files visible 3. Replace only the boot file with AnVal´s. Make a backup. 4. You needn´t to change anything in the com.apple.boot.plist. After you restart the copmuter, you can the in the activitycenter, that it will boot in 64bit. Sorry for the bad english.. ;-) Link to comment Share on other sites More sharing options...
thy1225 Posted March 21, 2011 Author Share Posted March 21, 2011 I have the same board. I works great, only the sound don´t work.How has you get it working? With the AnVal bootloader you can boot in the 64bit modus. 1. You must load the newst packet from this site AnVal 2. You must make all files visible 3. Replace only the boot file with AnVal´s. Make a backup. 4. You needn´t to change anything in the com.apple.boot.plist. After you restart the copmuter, you can the in the activitycenter, that it will boot in 64bit. Sorry for the bad english.. ;-) hi~ I did use the latest AnVal bootloader 5.1.4 in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.3 are they different ? About the sound, I'll have to check my computer when I go back. Will report back soon. Link to comment Share on other sites More sharing options...
cj95 Posted March 21, 2011 Share Posted March 21, 2011 I have that board (not b3) 2600k and 12gb ram. Just installed yesterday. Everything runs so fast. I'm getting 1200something(32bit) on geekbench (cpu @4.2 ghz) Everything working (haven't tested sleep) except that your cpu is not detected , so you cant use monitoring software. My activity monitor shows only one thread (obviously is running 8) Sound working with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.3 Ethernet working with miltibeast 3.3 Ati 5850 working with Chameleon rc5 ati experimental Everything is perfect exept for hardware detection, but that's likely to come with 10.6.7. Link to comment Share on other sites More sharing options...
r0nnie Posted March 21, 2011 Share Posted March 21, 2011 The AnVal bootloader 5.1.4 is the latest. I boot with arch=i386, but it boot in the 64 bit modus. Link to comment Share on other sites More sharing options...
C.Frio Posted March 23, 2011 Share Posted March 23, 2011 Hi... @Thy " legacy iboot10.6.3 combo upgrade 10.6.6 [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.3 -> UserDSDT Install (using maleorderbride's DSDT file from here , thanks for maleorderbride's guide) (maleorderbride's board is GA-P67A-UD3, although its not exactly the same as mine...i use it's DSDT anyway...., maybe it's not working well ...how to check?) Newcom's legacy kernel package Anval's boot loader 5.1.4 tony nvidia update for GTX460(with GraphicsEnabler=Yes)" I have the GA-P67A-UD3 and I suggest you a small change.. 1-legacy [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 2-install 10.6.3 retail 3-Combo upgrade 10.6.6 4-BRIDGEHELPER 5-[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.3 > [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and than after this audio,net,video... I'm using" busratio=30" and "arch=i386"with an i52400 SB for sound follow the guide too..(with this MB--892) Delete the AppleHDA.kext and the ALC8xxHDA.kext and install them from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] >kext.. c.frio Link to comment Share on other sites More sharing options...
thy1225 Posted March 23, 2011 Author Share Posted March 23, 2011 Hi... @Thy " legacy iboot10.6.3 combo upgrade 10.6.6 [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.3 -> UserDSDT Install (using maleorderbride's DSDT file from here , thanks for maleorderbride's guide) (maleorderbride's board is GA-P67A-UD3, although its not exactly the same as mine...i use it's DSDT anyway...., maybe it's not working well ...how to check?) Newcom's legacy kernel package Anval's boot loader 5.1.4 tony nvidia update for GTX460(with GraphicsEnabler=Yes)" I have the GA-P67A-UD3 and I suggest you a small change.. 1-legacy [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 2-install 10.6.3 retail 3-Combo upgrade 10.6.6 4-BRIDGEHELPER 5-[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.3 > [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and than after this audio,net,video... I'm using" busratio=30" and "arch=i386"with an i52400 SB for sound follow the guide too..(with this MB--892) Delete the AppleHDA.kext and the ALC8xxHDA.kext and install them from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] >kext.. c.frio Thanks a lot I'll try it later tonight and upgrade to 10.6.7 from the guide at Tony's Link to comment Share on other sites More sharing options...
scorcho Posted March 23, 2011 Share Posted March 23, 2011 I have a UD4-B3 and a 2500k, and that GeekBench score doesn't look far off from mine. You can read about my experiences here. Right now I'm using the vanilla kernel and don't have to fiddle with that busratio=29 nonsense. http://www.tonymacx86.com/viewtopic.php?f=79&t=15747 Link to comment Share on other sites More sharing options...
geticus Posted March 25, 2011 Share Posted March 25, 2011 Hi Any succes with new 10.6.7 vanilla kernel ? Link to comment Share on other sites More sharing options...
tricade Posted May 5, 2011 Share Posted May 5, 2011 somebody fixed that problem with the sound on a GA-P67A-UD3-B3 board? Link to comment Share on other sites More sharing options...
Recommended Posts