zorz Posted September 3, 2010 Share Posted September 3, 2010 As the Topic Tittle said, iAtkos s3 v2 all normally installed without any problem on ASUS M4A89GTD PRO motherboard with NB890/SB850. All i use are standard settings offered by iAtkos distro (quoopz 10.3 kernel, aka EFI 10.6, nV Enabler+String, AHCI SATA kext, VoodooHDA, OHR, Realtek 8111 LAN... etc). Only modification i made are under VoodooHDA (installed latest from MultyBeast and Raeltek1000sl.kext swapped from SL with Leopard Realtek1000.kext from Leopard 10.5.8). Practically everything work out of the box ). Fully updated except 10.6.4 combo till i backup important datas as: boot file, com.apple.Boot.plist, Extra folder, kernel... Link to comment Share on other sites More sharing options...
hintzsche Posted September 29, 2010 Share Posted September 29, 2010 does iatkos s3 v2 work with amd athlon +5200 ? Link to comment Share on other sites More sharing options...
zorz Posted September 29, 2010 Author Share Posted September 29, 2010 does iatkos s3 v2 work with amd athlon +5200 ? I really don't know.. The best way is to try! Link to comment Share on other sites More sharing options...
hintzsche Posted September 29, 2010 Share Posted September 29, 2010 i try your tutorial, i guess amd work with arch i386 but im not sure I tried installation but iatkos s3 v2 dont recognizes my ide drives ? do you know what i have to do that my ide drives are recognized ? Link to comment Share on other sites More sharing options...
runny eggs Posted September 29, 2010 Share Posted September 29, 2010 uphuck the author of iatkos said that v7 s3 does not work with AMD cpus. Link to comment Share on other sites More sharing options...
zorz Posted September 30, 2010 Author Share Posted September 30, 2010 i try your tutorial, i guess amd work with arch i386 but im not sure I tried installation but iatkos s3 v2 dont recognizes my ide drives ? do you know what i have to do that my ide drives are recognized ? Would You post Your complete configuration of components as mine shown in signature? uphuck the author of iatkos said that v7 s3 does not work with AMD cpus. Everything is written but in practice is something else! Link to comment Share on other sites More sharing options...
hintzsche Posted October 2, 2010 Share Posted October 2, 2010 Would You post Your complete configuration of components as mine shown in signature? Everything is written but in practice is something else! ok my systemconfiguration is nforce9m-a borad from elitegroup 2 GB DDR 2 Ram amd athlon 5200+ 2,70 GHz nvidia geforce 9500 GT graficcard 512 MB GDDR 3 2 IDE Harddrives 80GB 1 Sata DVD Burner from LG i hope that helps you XD is there a command to start installation with ide support ? Link to comment Share on other sites More sharing options...
zorz Posted October 3, 2010 Author Share Posted October 3, 2010 ok my systemconfiguration is nforce9m-a borad from elitegroup 2 GB DDR 2 Ram amd athlon 5200+ 2,70 GHz nvidia geforce 9500 GT graficcard 512 MB GDDR 3 2 IDE Harddrives 80GB 1 Sata DVD Burner from LG i hope that helps you XD is there a command to start installation with ide support ? Set in BIOS: IDE Drives Type to OFF Flopy to OFF AMD C&Q to OFF APIC mode to Enabled Onboard IDE Controller to Enabled OnChip S-ATA Controller to Enabled SATA Mode to SATA Mode or to AHCI if You have it ... If you be so lucky to start up installation, your Audio will be unusable... GOOD LUCK! Link to comment Share on other sites More sharing options...
hintzsche Posted October 3, 2010 Share Posted October 3, 2010 why the audio is not usable i did ideneb before with leopard and there i could use onbord audio Link to comment Share on other sites More sharing options...
zorz Posted October 3, 2010 Author Share Posted October 3, 2010 why the audio is not usable i did ideneb before with leopard and there i could use onbord audio OK the. Go ahead in new victories! post what You where done. Link to comment Share on other sites More sharing options...
hintzsche Posted October 3, 2010 Share Posted October 3, 2010 ok i did what you said. but there was no ide drives type in my bios settings so i diabled the ide busmaster but i had no luck the harddrives were not recognized. do you have any idea ? when i use S-ATA mode then i can start booting DVD but then i stops loading from DVD so i guess the efi cant handle the S-ATA Mode. The AHCI Mode works but on AHCI Mode IDE Drives dont work. Link to comment Share on other sites More sharing options...
vinaynair0906 Posted October 3, 2010 Share Posted October 3, 2010 As the Topic Tittle said, iAtkos s3 v2 all normally installed without any problem on ASUS M4A89GTD PRO motherboard with NB890/SB850.All i use are standard settings offered by iAtkos distro (quoopz 10.3 kernel, aka EFI 10.6, nV Enabler+String, AHCI SATA kext, VoodooHDA, OHR, Realtek 8111 LAN... etc). Only modification i made are under VoodooHDA (installed latest from MultyBeast and Raeltek1000sl.kext swapped from SL with Leopard Realtek1000.kext from Leopard 10.5.8). Practically everything work out of the box ). Fully updated except 10.6.4 combo till i backup important datas as: boot file, com.apple.Boot.plist, Extra folder, kernel... Hello Zorz, First of all, thanks for the post as I am thrilled to hear that you have been able to install the iAtkos Distro on the M4A89GTD motherboard. I have downloaded about 4 Distros already (Sow_Leopard, iDeneb, Kalway etc) but could not get to boot properly even by following various installation guides..The problem was that I could not even get to the GUI screen to start the installation []. I have now found that the iAtkos distro works. I am downloading the iAtkos 10.5.7 at the moment as I am writing this reply. I would request you to provide me with an installation guide which can help me in choosing the right BIOS Settings for the Board to start with. Also, I am clear now about the Kernel that I have to choose. Is there any other installs or settings that I need to choose the "Customize" screen before the installation commences? Also, please let me know the boot options that you applied when booting the iAtkos DVD to install. I believe I should be using -v cpus=1 maxmem=2048 busratio=20 (please let me know your thoughts on this) Between, I have managed to install all the MAC distros one by one on Oracle Virtual Box and I am quite happy with it. Will be more happy if I can get this to install on the system instead of running it as Virtual machine. Below are my system specs for your review: Processor: AMD Phenon II X6 1090T @ 3.2Ghz (never overclocked the proc) Motherboard: ASUS M4A89GTD Pro USB 3.0 RAM: Corsair DDR3, 1033 MHz Graphic Card: XFX ATI Radeon 5770 1GB Hard drives: 2 SATA drives of 1TB and 500 GB I will be awaiting your reply and thanks again! Link to comment Share on other sites More sharing options...
zorz Posted October 4, 2010 Author Share Posted October 4, 2010 Hello Zorz, First of all, thanks for the post as I am thrilled to hear that you have been able to install the iAtkos Distro on the M4A89GTD motherboard. I have downloaded about 4 Distros already (Sow_Leopard, iDeneb, Kalway etc) but could not get to boot properly even by following various installation guides..The problem was that I could not even get to the GUI screen to start the installation []. I have now found that the iAtkos distro works. I am downloading the iAtkos 10.5.7 at the moment as I am writing this reply. I would request you to provide me with an installation guide which can help me in choosing the right BIOS Settings for the Board to start with. Also, I am clear now about the Kernel that I have to choose. Is there any other installs or settings that I need to choose the "Customize" screen before the installation commences? Also, please let me know the boot options that you applied when booting the iAtkos DVD to install. I believe I should be using -v cpus=1 maxmem=2048 busratio=20 (please let me know your thoughts on this) Between, I have managed to install all the MAC distros one by one on Oracle Virtual Box and I am quite happy with it. Will be more happy if I can get this to install on the system instead of running it as Virtual machine. Below are my system specs for your review: Processor: AMD Phenon II X6 1090T @ 3.2Ghz (never overclocked the proc) Motherboard: ASUS M4A89GTD Pro USB 3.0 RAM: Corsair DDR3, 1033 MHz Graphic Card: XFX ATI Radeon 5770 1GB Hard drives: 2 SATA drives of 1TB and 500 GB I will be awaiting your reply and thanks again! My distro is iAtkos Snow Leopard 10.6.3 version. Update latest BIOS version. In Your BIOS You must set: SATA/IDE to AHCI switch OFF additional IDE switch OFF FireWire tourn ON ACPI and APIC turn ON HPET (on 64 if possible) switch OFF SpreadSpectrum... Boot iAtkos SL without any kernel flags and cross fingers for booting. Kernel flags are for Intel CPUs. If booting goes choose qooupz 10.3.0 kernel with 10.6.3 update and all another is Your wish (according to your system)... good luck! Link to comment Share on other sites More sharing options...
jeezcak3++ Posted October 22, 2010 Share Posted October 22, 2010 where did you get your iaktos s3 v2? i downloaded one but it was corrupted i believe.. it frees at 18 mins left while installing. can you get back to me on this? thanks! jeezcak3@gmail.com Link to comment Share on other sites More sharing options...
zorz Posted October 23, 2010 Author Share Posted October 23, 2010 where did you get your iaktos s3 v2? i downloaded one but it was corrupted i believe.. it frees at 18 mins left while installing. can you get back to me on this? thanks! jeezcak3@gmail.com It is not iAtkos problem. Its to Your comp!!! Problems are many so who know what is the main prob. Link to comment Share on other sites More sharing options...
quake Posted October 23, 2010 Share Posted October 23, 2010 I just tried this on my GA-MA78LM AMD Athlon64 x2 and it booted up on the first try. I don't know yet how stable it is, but I'm online now and just have to install my audio kext and I should be alright. Link to comment Share on other sites More sharing options...
LowRidinCrew Posted October 23, 2010 Share Posted October 23, 2010 Exact same Board i have! im running a AMD X6 though can you email me your settings and install files? Im kinda a newbie lol Link to comment Share on other sites More sharing options...
quake Posted October 23, 2010 Share Posted October 23, 2010 Exact same Board i have! im running a AMD X6 though can you email me your settings and install files? Im kinda a newbie lol I used the same settings as Zorz posted at the top. For these boards, I know mine needs the Appleazalia kext for audio. If it's like hazard's install, you may have to remove the VoodooHDA first if it is installed. I will let you know everything I had to do post install. Link to comment Share on other sites More sharing options...
LowRidinCrew Posted October 24, 2010 Share Posted October 24, 2010 Its not working for me. I used the AMD [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and i used the settings it told me its just stuck at the OSX apple screen Link to comment Share on other sites More sharing options...
LowRidinCrew Posted October 24, 2010 Share Posted October 24, 2010 *Update* I got it installed!! But.... I have issues. #1 No Ethernet #2 1024 x 768 display mode (ATi Radeon 5770) Is there anyway I can fix these issues with my OSX already installed? Link to comment Share on other sites More sharing options...
dothacker Posted October 27, 2010 Share Posted October 27, 2010 uphuck the author of iatkos said that v7 s3 does not work with AMD cpus. So, why did they put AMD support kexts in the distro if it doesn't work for AMD? doesn't make any sense. Practice, practice Link to comment Share on other sites More sharing options...
ilikecheese Posted October 27, 2010 Share Posted October 27, 2010 I used the same settings as Zorz posted at the top. For these boards, I know mine needs the Appleazalia kext for audio. If it's like hazard's install, you may have to remove the VoodooHDA first if it is installed. I will let you know everything I had to do post install. Hey QUAKE!! I have almost everything the same as you and it installs fine except the keyboard does not work. I cant even begin to try to install network or audio kexts. Any ideas on how to get the keyboard to work? When I install ideneb 1.6 the keyboard works fine. same board as you Ma78lms2 is an AMD x2 +4600 4 gigs of ram geforce 9600gt fanless iAtkos s3 v2 Link to comment Share on other sites More sharing options...
carlolaitano Posted October 27, 2010 Share Posted October 27, 2010 I can't seem to get the Install DVD to boot. I keep getting errors and after a while the computer just shuts off. I've been looking for help with no success. Here are my system specs: HP m7730la Media Center Motherboard: ASUS P5LP-LE (Leonite) Chipset: Intel 945G CPU: Pentium D 820, 775 socket RAM: 4GB DDR2 Graphics: nVidia GeForce 8600 1B (mobo has Intel GMA 950) Erros screenshot: http://cl.ly/bdd9de61297f89e07913 Link to comment Share on other sites More sharing options...
funpur Posted January 11, 2011 Share Posted January 11, 2011 My distro is iAtkos Snow Leopard 10.6.3 version.Update latest BIOS version. In Your BIOS You must set: SATA/IDE to AHCI switch OFF additional IDE switch OFF FireWire tourn ON ACPI and APIC turn ON HPET (on 64 if possible) switch OFF SpreadSpectrum... Boot iAtkos SL without any kernel flags and cross fingers for booting. Kernel flags are for Intel CPUs. If booting goes choose qooupz 10.3.0 kernel with 10.6.3 update and all another is Your wish (according to your system)... good luck! I´ve done all the settings you did, but i cannot start the GUI for installing OSX. Kernel Panic. Any Idea what i did wrong? I also tried -v cpus=1 bustratio=20 Heres my PC-Config: ASUS M4A89GTD PRO /USB3; AMD Phenom II X4 965; D3 4GB 1333-777 Ripjaws K2 GSK My SATA-Devices (HDDs and optical drives) Reduced 81% 1024 x 765 (326.78K) <script type=text/javascript> // are running in AHCI-Modus. Thx for your replies! Link to comment Share on other sites More sharing options...
zorz Posted January 12, 2011 Author Share Posted January 12, 2011 I´ve done all the settings you did, but i cannot start the GUI for installing OSX. Kernel Panic. Any Idea what i did wrong? I also tried -v cpus=1 bustratio=20 Heres my PC-Config: ASUS M4A89GTD PRO /USB3; AMD Phenom II X4 965; D3 4GB 1333-777 Ripjaws K2 GSK My SATA-Devices (HDDs and optical drives) Reduced 81% 1024 x 765 (326.78K) <script type=text/javascript> // are running in AHCI-Modus. Thx for your replies! What VGA You are using? My is nV and no any install problem. Try to change boot loader to Chameleon RC4... Installing SL OS is BIG LOTTERY!!! Link to comment Share on other sites More sharing options...
Recommended Posts