Jump to content

Retail Snow Leopard Install to gigabyte ep45-ds3r

osx86install

By osx86install,
in OSx86 10.6 (Snow Leopard)

 Share
16 posts in this topic

Recommended Posts

osx86install
osx86install
Posted
Posted

For successful installation, please watch this video

 

mainboard: gigabyte ep45-ds3r

Intel® Core2 Duo CPU E7200

2gb 667 mhz ram, sata DVD and HD

7600gt 256 mb gcard

 

+ boot 10.1 file

 

+ CMOS reset fix file (for gigabyte)

 

+ ep45-ds3r ext file

 

download files

 

ALC889 sound not yet!

svencux
svencux
Posted
Posted
For successful installation, please watch this video

 

mainboard: gigabyte ep45-ds3r

Intel® Core2 Duo CPU E7200

2gb 667 mhz ram, sata DVD and HD

7600gt 256 mb gcard

 

+ boot 10.1 file

 

+ CMOS reset fix file (for gigabyte)

 

+ ep45-ds3r ext file

 

download files

 

ALC889 sound not yet!

 

 

I have the same board and also no sound.

Any ideas so far ?

Do we have to patsch the DST differently, or is there a kext that can be instaled. I did try some lagacyhda kext but no luck

sunkid
sunkid
Posted
Posted
I have the same board and also no sound.

Any ideas so far ?

Do we have to patsch the DST differently, or is there a kext that can be instaled. I did try some lagacyhda kext but no luck

 

Got audio working (see here), but am getting the inadvertant KP after a few minutes of using SL. I can only boot using '-x32 -f' everything else gives me a KP at boot.

 

EDIT: EVERYTHING IS WORKING!!!! rebuild extension caches in single user mode did the trick!! :(

sunkid
sunkid
Posted
Posted

Very nice!!

 

Two quick questions and some observations:

  1. Have you checked your DVD/CDROM performance? Mine was running very very slow (or so it seemed) when I tried an upgrade of my 10.5.8 install from SL using the SL retail DVD.
    EDIT 9/8: DVDROM seems to behave fine... maybe a problem with the installer?!
  2. Is Bonjour working for you w/out the ifconfig/promiscous mode hack? Mine isn't, but I just found the attached but won't be able to try it until this afternoon (PST). Supposedly, the kext needs to go into /S/L/E and not /E/E.
    EDIT 9/3: this did not work for me
    EDIT 9/8: Bonjour is working now with the latest Realtek1000.kext properly installed (see below)

 

Here is some other stuff I found:

  • Possibly related: I am having issues with my auto-mounted iTunes library (NFS share on Centos box). I get server disconnects now from what was before a rock-solid set-up. By the way, Directory Utility is gone and this functionality is now in Disk Utility (File->NFS Mounts...).
    EDIT 9/3: probably NFS server related but need to investigate further
  • Time machine backups to AFP shares from my Centos box seem to be using a different naming convention now from before. TM tries to create a new sparsebundle that is simply named <computer's name>.sparsebundle. Haven't let it proceed yet though since I want to reuse my old backups but TM won't use the renamed disk image.
    EDIT 9/8: see my guide to get TM working on Linux AFP share
  • Upgrade from SL retail of a 10.5.8 install while running SL on a different volume does not work as the upgrade process creates and populates a directory on the target volume with all needed packages and then tries to reboot from that volume. I wasn't able to get that reboot to work, maybe others have better luck!? Also, the upgrade using the OSInstall.mpkg method is not clean as old shared libraries are left in place. I eventually just used Migration Assistant to transfer everything from the 10.5.8 install. That's a PITA though if you have a lot of licensed software (in my case Adobe CS3 and SnapZ Pro, for example) that uses disk ids for licensing. Need to reinstall those.

 

Otherwise, rock-solid so far :thumbsup_anim:

AppleRTL8139Ethernet.kext.zip

rcork
rcork
Posted
Posted

I have the same board and got the onboard sound to work using the ALC889A injector from here. This site is in French but just look for 889A. I have this in my Extra/Extensions folder on my Chameleon usb stick.

 

As for bonjour, I'm using the RealtekR1000.kext from Psystar. I installed it to S/L/E using OSX86Tools. Bonjour works perfectly.

 

Very nice!!

 

Two quick questions and some observations:

  1. Have you checked your DVD/CDROM performance? Mine was running very very slow (or so it seemed) when I tried an upgrade of my 10.5.8 install from SL using the SL retail DVD.
  2. Is Bonjour working for you w/out the ifconfig/promiscous mode hack? Mine isn't, but I just found the attached but won't be able to try it until this afternoon (PST). Supposedly, the kext needs to go into /S/L/E and not /E/E.
    EDIT 9/3: this did not work for me

 

Here is some other stuff I found:

  • Possibly related: I am having issues with my auto-mounted iTunes library (NFS share on Centos box). I get server disconnects now from what was before a rock-solid set-up. By the way, Directory Utility is gone and this functionality is now in Disk Utility (File->NFS Mounts...).
    EDIT 9/3: probably NFS server related but need to investigate further
  • Time machine backups to AFP shares from my Centos box seem to be using a different naming convention now from before. TM tries to create a new sparsebundle that is simply named <computer's name>.sparsebundle. Haven't let it proceed yet though since I want to reuse my old backups but TM won't use the renamed disk image.
  • Upgrade from SL retail of a 10.5.8 install while running SL on a different volume does not work as the upgrade process creates and populates a directory on the target volume with all needed packages and then tries to reboot from that volume. I wasn't able to get that reboot to work, maybe others have better luck!? Also, the upgrade using the OSInstall.mpkg method is not clean as old shared libraries are left in place. I eventually just used Migration Assistant to transfer everything from the 10.5.8 install. That's a PITA though if you have a lot of licensed software (in my case Adobe CS3 and SnapZ Pro, for example) that uses disk ids for licensing. Need to reinstall those.

 

Otherwise, rock-solid so far :)

sunkid
sunkid
Posted
Posted
As for bonjour, I'm using the RealtekR1000.kext from Psystar. I installed it to S/L/E using OSX86Tools. Bonjour works perfectly.

 

That did the trick! Thanks!!

 

btw - OSX68Tools doesn't work for me anymore, but I installed the extension manually:

sudo chown -R 0:0 Realtek1000.kext
sudo chmod -R go-r Realteck1000.kext
sudo mv Realtek1000.kext /System/Library/Extensions
sudo kextcache -mkext1 Extensions.mkext /System/Library/Extensions

Not sure if the last step is necessary, as SL seems to automatically rebuild its Extension cache now.

cheesetoast
cheesetoast
Posted
Posted

i tried this method, exactly like hte video, but on boot it stalls at:

 

dyld: shared cached file was build against a different libSystem.dylib, ignoring cache"

 

can't get it going in ignore cache, or single user :)

 

ep45-ds3r

q9400

8gb mushkin ram

seagate 500gb sata hd

Tikakan
Tikakan
Posted
Posted

I got a more or less working system with no sound/3d Acceleration. I ll look into it as soon as I finish my Poster for the Conference next week.

 

My System:

GA Ep45 DS3R Bios F11c BETA Board

E8400 3 Ghz C2D CPU

gForce 9800GTX+ 512MB gfxcard

4x 2 GB Aeneon 800MHz RAM

1 TB Samsung HDD

1 TB Seagate HDD

1 Pioneer Sata DVD burner

1 Pioneer FW DVD drive

1 obsolete :dry: EfiX v1.0

 

Working systems: Windows XP, Ubuntu, Kalyway 10.5.6 on Samsung HD

beta systems: SL 10.6.1 (no Sound,3d acc.) on Seagate HD

 

booting from: Chameleon2 RC2 on Snowleopard Disk

  • 3 weeks later...
paduck
paduck
Posted
Posted
I have the same board and got the onboard sound to work using the ALC889A injector from here. This site is in French but just look for 889A. I have this in my Extra/Extensions folder on my Chameleon usb stick.

 

Do you have sound in working on both the front and back panel (ie- microphone?)

amd_sony
amd_sony
Posted
Posted

I used the OSInstall.mpkg method to get 10.6 installed after trying USB and DVD method. A lot of googling and membership to 2 other sites and I got lucky. Audio works too.

 

Hopefully next one won't be so hard!

 

Being a sucker for punishment, I'm going to upgrade to 10.6.1.

  • 4 weeks later...
netfeng
netfeng
Posted
Posted
What video driver are you using? I have the same video card with you. But the driver is not properly installed. Previously I had NVInstaller+v.52.pkg working on 10.5.7, but it is not working on SL anymore. Any idea?

 

Solved by manually copied NVinject.kext.

sylvester328
sylvester328
Posted
Posted

I have this board with Q6600 but having trouble with wake on LAN.

 

Realtek1000 kext: wake on LAN doesn't work.

 

The vanilla AppleRTL8139Ethernet.kext: wake on LAN works but the machine goes to a "limbo" state when it's put to sleep again (it goes on then off then on then off... every 5-10 seconds, display remains blank) I have to cut the main power stop that.

 

Anyone get that working? Or experience similar issue?

 

My System:

GA-EP45-DS3R BIOS F11e

Intel Q6600 CPU

nVidia 8400GS 512MB graphics card

2 GB DDR2 RAM

 Share
Go to topic listing
×
×
  • Create New...