AnaTheTurian Posted May 27, 2010 Share Posted May 27, 2010 Why don't you use the Kext for Snow Leopard???? Doesnt do anything, HOWEVER i got it all working, seems there was a kext conflict and i isolated it to a previous kext i installed. (AttansicLcEthernet.kext) All is working now! Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1476465 Share on other sites More sharing options...
uvapotta Posted May 30, 2010 Share Posted May 30, 2010 Nice Work! But i Can´t make work in may Acer 1410 with AR8131 Dev_1063... Nothing happens after i install the Kext... And i install right because the VoodooHDA is working Anyone? BTW: Where i can read the kernel output? Sorry my english Thanks Guys Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1478486 Share on other sites More sharing options...
FredyRR Posted May 30, 2010 Share Posted May 30, 2010 AtherosL1cEthernet AR8131 work in 64bits with 10.6.0 , but not working in 64bits with 10.6.3 !!! but run with 32bits ,I am to oblige to remain in 32bits with 10.6.3 ? Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1478792 Share on other sites More sharing options...
rwired Posted June 3, 2010 Share Posted June 3, 2010 Works on 10.5.7 MSI 770-G45 AMD Athlon II 3.00 GHz AM3 ATI Radeon HD4670 RV730 Installed with Kext Helper b7, and didn't even require a reboot (was recognized as a new network interface immediately and connected over DHCP) THANK YOU! Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1481434 Share on other sites More sharing options...
buoo Posted June 3, 2010 Share Posted June 3, 2010 Hi Guys In my Aspire 5739g there is a Atheros AR8131 and I'm trying to make it work. I have found the right kext and I have also checked my card Id is good, but I have this error: localhost kernel[0]: [AttansicL1eEthernet] Error: Couldn't map io regs localhost kernel[0]: [AttansicL1eEthernet] Error: Couldn't probe adapter What could I do? Thanks Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1481599 Share on other sites More sharing options...
buoo Posted June 5, 2010 Share Posted June 5, 2010 Up Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1482433 Share on other sites More sharing options...
jsl Posted June 7, 2010 Share Posted June 7, 2010 AtherosL1cEthernet AR8131 work in 64bits with 10.6.0 , but not working in 64bits with 10.6.3 !!! but run with 32bits ,I am to oblige to remain in 32bits with 10.6.3 ? 1. AtherosL1cEthernet AR8131 work in 64bits with 10.6.2 and 10.6.3 in my Asus G51J 3D 2. You need the newest x64 Kext dated on 04/25/2010 from http://code.google.com/p/iats/ 3. You may get kernel panic on shutdown or re-booting after installation for the first time 4. Just ignore it ! You need -v -f -x32 for the first reboot to rebuild the correct kextcache and make sure it's working in 32-bits 5. After second reboot you can find it's working in 64-bits too ! Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1483602 Share on other sites More sharing options...
jsl Posted June 7, 2010 Share Posted June 7, 2010 Hi Guys In my Aspire 5739g there is a Atheros AR8131 and I'm trying to make it work. I have found the right kext and I have also checked my card Id is good, but I have this error: localhost kernel[0]: [AttansicL1eEthernet] Error: Couldn't map io regs localhost kernel[0]: [AttansicL1eEthernet] Error: Couldn't probe adapter What could I do? Thanks 1. You have used the incorrect Kext which should be AtherosL1cEthernet 2. Please follow my post: Posted Today, 02:49 AM Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1483817 Share on other sites More sharing options...
buoo Posted June 8, 2010 Share Posted June 8, 2010 1. You have used the incorrect Kext which should be AtherosL1cEthernet2. Please follow my post: Posted Today, 02:49 AM Thanks jsl, but it doesn't works ..the same error Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1484347 Share on other sites More sharing options...
fallenlordz Posted June 12, 2010 Share Posted June 12, 2010 Works great on my GA-G31M-ES2L - Rev. 2 Board Used Kext Helper b7 to install - thanks so much!!! After waiting for so long, I have working internet on my mac now Thanks again! Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1487235 Share on other sites More sharing options...
reader02 Posted June 13, 2010 Share Posted June 13, 2010 localhost kernel[0]: [AttansicL1eEthernet] Error: Couldn't map io regslocalhost kernel[0]: [AttansicL1eEthernet] Error: Couldn't probe adapter The reason is PCI driver memory map is not correct,especially in some Acer machines. now there is no good solution. Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1487794 Share on other sites More sharing options...
Onixs Posted June 13, 2010 Share Posted June 13, 2010 reader02 Atheros L1 is not working. "Cable Unplug". Working fine with AttansicL1Ethernet.kext. Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1487802 Share on other sites More sharing options...
Paradoxxx SL Posted June 17, 2010 Share Posted June 17, 2010 Works perfectly with eepc 1005 ha!, Thank you so much! Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1491524 Share on other sites More sharing options...
stevebow Posted June 20, 2010 Share Posted June 20, 2010 I haven't read through this entire thread but I have found reader02's i386 10.5 Leopard L1C driver seems to work on my Eee 1008HA (ethernet PCI ID 1969:1062) quite nicely under 10.6.3: http://code.google.com/p/iats/downloads/list Thanks reader02!! Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1493924 Share on other sites More sharing options...
Dehlizzz Posted June 21, 2010 Share Posted June 21, 2010 I've i7920 intel chipset thank you very very very much its working Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1495224 Share on other sites More sharing options...
Xiloa Posted June 21, 2010 Share Posted June 21, 2010 Anyone having any luck with the Acer 6930g yet? It has the 1026 but doesn't work with any of these kexts in this thread or the other P5Q one. Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1495252 Share on other sites More sharing options...
pauliebb Posted June 22, 2010 Share Posted June 22, 2010 we need help with 6930g! is there any way to map the pci directly?? i know someone tried using the infolist but failed. please i need internet! Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1495600 Share on other sites More sharing options...
reader02 Posted June 22, 2010 Share Posted June 22, 2010 we need help with 6930g! is there any way to map the pci directly?? i know someone tried using the infolist but failed. please i need internet! if has error : Couldn't map io regs. try this in leopard : http://www.insanelymac.com/forum/index.php?showtopic=81036 in snow leopard : http://www.projectosx.com/forum/index.php?...entry2520 Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1495711 Share on other sites More sharing options...
pauliebb Posted June 22, 2010 Share Posted June 22, 2010 if has error : Couldn't map io regs.try this in leopard : http://www.insanelymac.com/forum/index.php?showtopic=81036 in snow leopard : http://www.projectosx.com/forum/index.php?...entry2520 what exactly does this do? im using 5.8 leopard iatkos 7 and have the map error, i'll try it when home but curious as to what it does? ethernet never shows in hardware list Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1496011 Share on other sites More sharing options...
reader02 Posted June 23, 2010 Share Posted June 23, 2010 what exactly does this do? im using 5.8 leopard iatkos 7 and have the map error, i'll try it when home but curious as to what it does? ethernet never shows in hardware list 1.It's AR8121 (atheros L1e) which NIC of 6930G ,isn't AR8131 (attheros L1c). 2.AR8121 kext on 6930G ,have the map error. the reason is PCI driver memory map is not correct. So ,first try install the modfied PCI driver of leopard in here :http://www.insanelymac.com/forum/index.php?showtopic=81036 Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1496292 Share on other sites More sharing options...
pauliebb Posted June 23, 2010 Share Posted June 23, 2010 1.It's AR8121 (atheros L1e) which NIC of 6930G ,isn't AR8131 (attheros L1c).2.AR8121 kext on 6930G ,have the map error. the reason is PCI driver memory map is not correct. So ,first try install the modfied PCI driver of leopard in here :http://www.insanelymac.com/forum/index.php?showtopic=81036 installing now, after this would i install your kext also? Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1496452 Share on other sites More sharing options...
pauliebb Posted June 23, 2010 Share Posted June 23, 2010 installing now, after this would i install your kext also? installed kext you asked me to along with yours, now getting an error: [HCIController][configurePM] power parent ready after 1 tries and freeze there thinking its a conflict with apci? even -x freezes on legacyappleahciport is not loadable. going to try without smbios Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1496943 Share on other sites More sharing options...
pauliebb Posted June 23, 2010 Share Posted June 23, 2010 sorry, cant seem to get leopard to boot without acpi, needed for sata i think, and those pci kexts overwrite the apci. any other suggestions? really would love ethernet at least because then i could use dd wrt to make wireless Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1497126 Share on other sites More sharing options...
pauliebb Posted June 24, 2010 Share Posted June 24, 2010 what about efi strings to force pci to reg? Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1497351 Share on other sites More sharing options...
Nemo1369 Posted June 24, 2010 Share Posted June 24, 2010 Hi to evrybody! People, help me please to get working Atheros AR8131 on my Acer Extensa 5635G. So, what have I got: Intel Core 2 Duo T6570, nVidia G105 M (enabled with graphics enabler), Sound (I don't know what type exactly, but I got it working with VooDooHDA 262). That's what I tried to get up. There is only a Ethernet card witch doesn't work. That kext build_x64_20100425 doesn't work. I tried it with original IOPCIFamily.kext and with modified. No result. Please help me. P.S. Comme toujours excuse moi pour mon anglais. P.P.S Excuse me for my bad english. Link to comment https://www.insanelymac.com/forum/topic/181343-atheros-ar8131ar8132/page/10/#findComment-1497723 Share on other sites More sharing options...
Recommended Posts