Jump to content

ASUS P5W DH DELUXE 10.5.6 + 10.5.7 Released!

Ritz Carltn

By Ritz Carltn,
in OSx86 10.5 (Leopard)

 Share
24 posts in this topic

Recommended Posts

Ritz Carltn
Ritz Carltn
Posted
Posted

It's time to discuss about 10.5.6 in ASUS P5W DH DELUXE Mobo.

Hi, all,

 

I did not use DSDT Patcher.

I need DSDT patch for what? :)

 

Software Update from 10.5.5 to 10.5.6 success,

 

1. Applying Software Update,

2. Recover File Permission in Disk Utility

3. Reboot

4. 1st, failed, error message "Kill All Processor, HALTED"

5. 2nd try to boot, sucess.

 

Problem, USB Mouse is not working. Others working well.

I have to use Logitech Wireless Mouse or DELL MO56UO Mouse and PS/2 Keyboard.

 

BOOT-132 using USB Memory stick, ASUS P5W DH DELUXE Mobo + NVKush

 

I found out Boot-132 initrd.img as followings.

 

http://www.mediafire.com/?sharekey=743debc...2db6fb9a8902bda

 

[updated, May-16]

I used DSDT.aml and update to 10.5.7 with Boot-132.

Yea, working Great!

 

I also used xpc Bootloader by iPhoneTom.

You can see his posting as followings.

 

http://www.insanelymac.com/forum/index.php...=157287&hl=

gary88
gary88
Posted
Posted
It's time to discuss about 10.5.6 in ASUS P5W DH DELUXE Mobo.

Hi, all,

 

I did not use DSDT Patcher.

I need DSDT patch for what? :unsure:

 

Software Update from 10.5.5 to 10.5.6 success,

 

1. Applying Software Update,

2. Recover File Permission in Disk Utility

3. Reboot

4. 1st, failed, error message "Kill All Processor, HALTED"

5. 2nd try to boot, sucess.

 

Problem, USB Mouse is not working. Others working well.

I have to use Logitech Wireless Mouse.

 

BOOT-132 using USB Memory stick, ASUS P5W DH DELUXE Mobo + NVKush

 

 

 

Hi, me the same update went fine with dsdt patch and PC_EFI_V9 ,but usb only works in usb1 mode (slow) any ideas ?

Ritz Carltn
Ritz Carltn
Posted
  • Author
Posted
Hi, me the same update went fine with dsdt patch and PC_EFI_V9 ,but usb only works in usb1 mode (slow) any ideas ?

 

I also try to find out now.

My issue is PS/2 keyboard, USB Mouse, CPU Information.

I still did not use DSDT Patch.

Tek
Tek
Posted
Posted

Try to use the same kext used to fix the problem with DFU mode when jailbreaking the iPhone on 10.5.6. I think it is just the kext from 10.5.5.

 

I have a P5W DH Deluxe also running 10.5.5.

 

Try the one attached. It is from the iPhone-Dev Blog. Backup first!

Install_IOUSBFamily_kext_10_5_5.zip

geminimac
geminimac
Posted
Posted
Try to use the same kext used to fix the problem with DFU mode when jailbreaking the iPhone on 10.5.6. I think it is just the kext from 10.5.5.

 

I have a P5W DH Deluxe also running 10.5.5.

 

Try the one attached. It is from the iPhone-Dev Blog. Backup first!

 

 

Hi Tek,

 

this method resolved the problem USB 1.0 at 2.0?

have you tested it?

I have P5W dh and I would update at 10.5.6...

can you reply?

 

thanks

Tek
Tek
Posted
Posted
Hi Tek,

 

this method resolved the problem USB 1.0 at 2.0?

have you tested it?

I have P5W dh and I would update at 10.5.6...

can you reply?

 

thanks

 

I haven't upgraded to 10.5.6 yet on my Hackintosh, only on my MacBook Pro, so I havent tried this.

 

I am only making suggestions at this point.

Ritz Carltn
Ritz Carltn
Posted
  • Author
Posted

I try to use your attached file in /extra folder, BOOT-132 USB Memory Stick.

But, it's not working. I thought I have to install /System/Library/Extensions folder.

After checking, I'll post the result again.

 

Try to use the same kext used to fix the problem with DFU mode when jailbreaking the iPhone on 10.5.6. I think it is just the kext from 10.5.5.

 

I have a P5W DH Deluxe also running 10.5.5.

 

Try the one attached. It is from the iPhone-Dev Blog. Backup first!

  • 3 weeks later...
Baron Istefan
Baron Istefan
Posted
Posted
I also try to find out now.

My issue is PS/2 keyboard, USB Mouse, CPU Information.

I still did not use DSDT Patch.

 

Hi, I had the same problem with my PS/2 ports. Go here and download and install the kext and it works great! http://forum.insanelymac.com/index.php?showtopic=114578

joedredd
joedredd
Posted
Posted

Would anyone care to list all the kexts or modifications they've applied?

 

I'm trying to work on the most virgin install possible and having trouble. My working config has been running since 10.4.10 and been upgraded and patched so many times. Although it's running virgin kernel and 10.5.6 I'd rather start from square one again.

 

So - would anyone care to list the MINIMUM requirements to get our boards working?

 

Obviously latest EFI/boot process etc. That's easy enough. Strings for graphics and network.

AppleHDA custom required for audio (as methodman has mentioned)

Remove AppleIntelCPU - some people say yes..some say don't need to.

Ritz Carltn
Ritz Carltn
Posted
  • Author
Posted

I try to gather latest kext for P5W DH DELUXE Mobo as followings.

Please check it.

 

http://www.mediafire.com/?sharekey=743debc...2db6fb9a8902bda

 

Would anyone care to list all the kexts or modifications they've applied?

 

I'm trying to work on the most virgin install possible and having trouble. My working config has been running since 10.4.10 and been upgraded and patched so many times. Although it's running virgin kernel and 10.5.6 I'd rather start from square one again.

 

So - would anyone care to list the MINIMUM requirements to get our boards working?

 

Obviously latest EFI/boot process etc. That's easy enough. Strings for graphics and network.

AppleHDA custom required for audio (as methodman has mentioned)

Remove AppleIntelCPU - some people say yes..some say don't need to.

Bob Ajob
Bob Ajob
Posted
Posted

After installing a totally vanilla retail 10.5.4 on my Asus P5W DH DELUXE (using a backup installation running from an external USB drive and running OSInstall.mpkg from terminal) then applying the 10.5.6 combo update, my only changes were to install PC_EFI_v9 bootloader, patch DSDT, install AppleSMbios.kext, dsmos.kext, disabler.kext and fix sound with Taruga's AppleHDAPatcher 1.20 and add EFI strings for Graphics and Ethernet with EFIstudio. I deleted AppleHPET.kext and AppleHWSensor.kext as that seemed to resolve some intermittent USB issues but not sure if that was necessary. Wake from sleep seems to be the only thing not working (but it never has - I suspect graphics card is root cause).

Flashlab
Flashlab
Posted
Posted
After installing a totally vanilla retail 10.5.4 on my Asus P5W DH DELUXE (using a backup installation running from an external USB drive and running OSInstall.mpkg from terminal) then applying the 10.5.6 combo update, my only changes were to install PC_EFI_v9 bootloader, patch DSDT, install AppleSMbios.kext, dsmos.kext, disabler.kext and fix sound with Taruga's AppleHDAPatcher 1.20 and add EFI strings for Graphics and Ethernet with EFIstudio. I deleted AppleHPET.kext and AppleHWSensor.kext as that seemed to resolve some intermittent USB issues but not sure if that was necessary. Wake from sleep seems to be the only thing not working (but it never has - I suspect graphics card is root cause).

 

@Bob

 

I also have the USB problem on my P5W with 10.5.6; two ports are not working anymore. Haven't tested speed yet but losing the two ports bugs me enough...

 

I will try your method tomorrow but about the EFI strings; what string are you using for Ethernet?

Flashlab
Flashlab
Posted
Posted

A little update; when I install iPC 10.5.6 without any drivers my P5W has working USB. After some patching it still works but after updating Safari, Quicktime and iTunes through Software Update on reboot the USB problem is back...

314TeR
314TeR
Posted
Posted

Hi all

 

P5W DH Deluxe is one of the best motherboard for hackintosh.

 

To make working USB 2.0, you need change the IOPCIFamili,kext in in /S/L/E from stock version 2.5.0 from original update 10.5.6, to this version (2.5.4):

http://forum.insanelymac.com/index.php?act...st&id=40552

from this topic:

http://forum.insanelymac.com/index.php?showtopic=117029

That is only one kext that I need to replace in /S/L/E to make Retail 10.5.6 work on P5W DH Deluxe.

 

To make almost 100% Vanilla on 10.5.6 you need install 10.5.4 + combo 10.5.6 or 10.5.6 Retail by osinstall.mpkg method to target drive, install PC_EFI 9.0, and put this kext to /Extra/Extensions1/

http://rapidshare.com/files/186139439/Essential.zip

http://rapidshare.com/files/186140042/Intel_ICHx_JMicron.zip

for audio (ALC882) kext from this thread:

http://forum.insanelymac.com/index.php?sho...129058&st=0

and finally make /Extra/Extensions.mkext 

cd /Volumes/HDD_Name
 sudo mv Extra/Extensions1 Extra/Extensions/   
 sudo chown -R 0:0 Extra
 sudo chmod -R 755 Extra
 sudo kextcache -a i386 -m Extra/Extensions.mkext Extra/Extensions
 sudo mv Extra/Extensions Extra/Extensions1

  • 4 weeks later...
  • 2 weeks later...
splintah
splintah
Posted
Posted

i would strongly recommend doing a 100% vanilla install via boot132/munky

it works REALLY well on this board

 

 

p5w discussion thread after install: http://www.insanelymac.com/forum/index.php?showtopic=156057

guide for this method: http://www.insanelymac.com/forum/index.php...p;#entry1084836

Ritz Carltn
Ritz Carltn
Posted
  • Author
Posted

Somebody have a solution for shutdown?

I used Boot-132, usb, FireWire(1394) working good by removing AppleHPET.kext.

Only thing is Shutdown issue is just remained.

  • 2 months later...
Snooker216
Snooker216
Posted
Posted

I ask this question in here because all readers should own a P5W deluxe.

 

Anyone managed to install on RAID0 or RAID5? What settings in the BIOS were made, on what connectors are the disks connected?

 

I want to install from scratch, so there is NO OS X available to do any tricks.

 

AND... I want to use Windows on a RAID0 or RAID5 too. so the solution should fit in both ways.

 

I could use up to 4 250GB HDDs for this.

 

THX in forward for your suggestions.

  • 5 months later...
cédric
cédric
Posted
Posted

hi!

i've installed osx by ideneb 10.5.7 on my p5wdh deluxe with geforce 8800gt.

All works great during the installation and after.

The system works great with internet, graphics 1920*1080p full hd the only problem is that few minutes (15 minutes) after booting my osx, the screen and also the system locks and there's no other solution that reset the computer.

i've try to disabled the screen saver and more but i don't know where this problem come from.

can you help please?

thx a lot and sorry for my very bad english.

 Share
Go to topic listing
×
×
  • Create New...